25V-562 Open recall Aug 29, 2025
Altec Industries, Inc.
STRUCTURE:FRAME AND MEMBERS
Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
Risk: A cable step that fails during use increases the risk of injury.
Remedy: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246. The repair is free at any franchised dealer of your brand.
Read the full explainer → 24V-015 Open recall Jan 11, 2024
Altec Industries, Inc.
ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES
Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.
Risk: A short circuit increases the risk of a fire.
Remedy: Altec will inspect and relocate the cables and fuse blocks, free of charge. Owner notification letters are expected to be mailed March 8, 2024. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3142. The repair is free at any franchised dealer of your brand.
Read the full explainer → 23V-216 Open recall Mar 30, 2023
Altec Industries, Inc.
STRUCTURE:BODY
Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
Risk: A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Remedy: Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064. The repair is free at any franchised dealer of your brand.
Read the full explainer → 22V-613 Open recall Aug 10, 2022
Altec Industries, Inc.
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Altec Industries, Inc. (Altec) is recalling certain 2015-2022 DT65 and DT85 Aerial Devices. The weld between the base boom and the auger stow bracket could crack.
Risk: A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
Remedy: Altec will inspect and repair cracks found in the base boom, free of charge. Owner notification letters were mailed October 7, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN-3017. The repair is free at any franchised dealer of your brand.
Read the full explainer → 22V-577 Open recall Aug 4, 2022
Altec Industries, Inc.
ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.
Risk: A blown fuse can cause an engine stall, increasing the risk of a crash.
Remedy: Altec will install a relay, free of charge. Owner notification letters are expected to be mailed September 30, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3015. The repair is free at any franchised dealer of your brand.
Read the full explainer → 22V-146 Open recall Mar 11, 2022
Altec Industries, Inc.
EQUIPMENT
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.
Risk: Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.
Remedy: Altec will install a carbon monoxide detector and safety alert placard, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 864. The repair is free at any franchised dealer of your brand.
Read the full explainer → 22V-147 Open recall Mar 11, 2022
Altec Industries, Inc.
FUEL SYSTEM, DIESEL:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 AT and TA aerial devices. The chassis fuel line clamps may not have been secured properly after they were removed to install an aftermarket accessory.
Risk: Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.
Remedy: Altec will provide work instructions and a kit to properly secure the fuel line, and repair any damaged fuel line if necessary, free of charge. Owner notification letters were mailed on May 6, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 855. The repair is free at any franchised dealer of your brand.
Read the full explainer → 22V-058 Open recall Feb 3, 2022
Altec Industries, Inc.
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Risk: Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Remedy: Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on April 4, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 846. The repair is free at any franchised dealer of your brand.
Read the full explainer → 21V-998 Open recall Dec 20, 2021
Altec Industries, Inc.
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:MOTOR/HYDRAULIC PUMP
Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.
Risk: The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.
Remedy: Altec will inspect and correct the plumbing as necessary, free of charge. Owner notification letters are expected to be mailed February 18, 2022. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 842. The repair is free at any franchised dealer of your brand.
Read the full explainer → 21V-722 Open recall Sep 16, 2021
Altec Industries, Inc.
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE
Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.
Risk: Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
Remedy: Altec will inspect the outer rotation bolt washers and repair the pedestal as necessary, free of charge. Owner notification letters were mailed on November 15, 2021. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 833. The repair is free at any franchised dealer of your brand.
Read the full explainer → 21V-409 Open recall Jun 1, 2021
Altec Industries, Inc.
EQUIPMENT, EQUIPMENT ADAPTIVE/MOBILITY
Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.
Risk: Unintended movement of the lower and upper booms increases the risk of injury.
Remedy: Altec will install a jumper hose and check valve into the boomtip tank lines and replace the overcenter blocking cartridge with an internally referenced drain path, free of charge. Owner notification letters were mailed on July 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 823. The repair is free at any franchised dealer of your brand.
Read the full explainer → 21V-239 Open recall Apr 5, 2021
Altec Industries, Inc.
STRUCTURE:CRITICAL FASTENERS
Altec Industries, Inc. (Altec) is recalling certain 2017-2018 AT37/41/48M, AT41P, AT48S, L37M, L42A, and TA40 aerial device vehicles. The rotation bearing fasteners may experience stress corrosion cracking.
Risk: Cracked rotation bearing fasteners may break, causing separation of the pedestal and turntable, increasing the risk of death and/or injury.
Remedy: Altec will notify owners, and dealers will replace the rotation bearing fasteners, free of charge. The recall began on May 21, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 807. The repair is free at any franchised dealer of your brand.
Read the full explainer → 21V-012 Open recall Jan 15, 2021
Altec Industries, Inc.
EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER
Altec Industries, Inc. (Altec) is recalling certain 2016-2020 DH-B Series, DH-E Series, and D3000-E digger derricks set up for combined use and equipped with radio remote upper controls. These units only have the derrick use capacity chart and do not have the combined use capacity chart.
Risk: The operator may not have access to the rated capacity information while they are operating the equipment in combined use, increasing the risk of an injury.
Remedy: Altec will notify owners, and will require them to attach a capacity placard to the radio remote using a lanyard if it is missing, free of charge. The recall began on March 16, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 792. The repair is free at any franchised dealer of your brand.
Read the full explainer → 20V-502 Open recall Aug 25, 2020
Altec Industries Inc.
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
Altec Industries Inc. is recalling certain 2015-2018 LR7, ALB, AC18, AC23, and AC38 vehicles built on an International N9/N10 chassis. During an HC Desorb cycle, the vehicle's idle will rapidly rise causing an increase in pump flow. The increased pump flow can result in the moving speed of the boom changing.
Risk: The change in boom speed can result in unintended positioning of the boom, increasing the risk of injury.
Remedy: Altec will notify owners, and dealers install an update that will reprogram the low idle preset to 850 RPM, free of charge. The recall began October 16, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 774. The repair is free at any franchised dealer of your brand.
Read the full explainer → 20V-401 Open recall Jul 10, 2020
Altec Industries Inc.
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM, EQUIPMENT
Altec Industries, Inc. (Altec) is recalling certain 2017-2020 AT200A, AT235, AT37-G, AT40-G, AT41/48M Aerial Devices mounted on a Ford F-350, F-450 or F-550 chassis equipped with a gas engine and Chelsea 249 Power Take-Off (PTO). The PTO may leak oil onto the exhaust heat shield thermal blanket.
Risk: Oil absorbed by the exhaust heat shield thermal blanket has an increased risk of a fire from being exposed to hot engine components.
Remedy: Altec will notify owners, and dealers will inspect and replace the heat shield with a redesigned version, as well as install plumbing to relocate a pressure switch and install hoses with improved routing to increase their distance from heat sources, free of charge. The recall began September 8, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 767. The repair is free at any franchised dealer of your brand.
Read the full explainer → 20V-301 Open recall May 26, 2020
Altec Industries Inc.
EQUIPMENT:OTHER:LABELS, TRAILER HITCHES
Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.
Risk: If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.
Remedy: Altec will notify owners and provide instructions for inspecting the bumper and receiver tube for damage and repairing as necessary and installing the proper hitch load rating placards on the unit. This recall began July 24, 2020. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 761. The repair is free at any franchised dealer of your brand.
Read the full explainer → 19V-602 Open recall Aug 15, 2019
Altec Industries Inc.
EQUIPMENT:MECHANICAL:WINCH
Altec Industries Inc. (Altec) is recalling certain 2012-2019 Altec AM60E, AA55E, AH75/85/100, AH125, and AH150 Aerial Devices. The recovery winch valve may allow the winch to lift more than it is rated for.
Risk: If the recovery winch attempts to lift more than it is rated for, it can increase the risk of an injury or death.
Remedy: Altec will notify owners, and instruct owners to inspect the winch pressures and install an external pressure relief valve, if necessary, free of charge. The recall began October 7, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 734. The repair is free at any franchised dealer of your brand.
Read the full explainer → 19V-573 Open recall Aug 5, 2019
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 2017-2019 LS60 Aerial Devices. The aerial devices may not meet all aerial level ground and slope stability requirements, allowing the units to become unstable and possibly overturn.
Risk: An unstable aerial device can increase the risk of injury.
Remedy: Altec will notify owners, instructing them to replace the unit load charts, adjust the Hydraulic Overload Protection (HOP) settings, verify the unit has the proper counterweight, and perform a stability test. The recall began September 13, 2019. Owners may contact Altec customer service at 1-877-462-5832. The repair is free at any franchised dealer of your brand.
Read the full explainer → 19V-483 Open recall Jun 21, 2019
Altec Industries Inc.
SERVICE BRAKES, AIR
Altec Industries Inc. (Altec) is recalling certain 2003-2019 Altec TA45, TA50, TA55, TA60, L37, L39, LRV, LR7, A-T40C, T40P and AP45 vehicles equipped with air-cushioned pintle hitch and/or accessory air components. The accessories utilizing chassis air supply may be missing pressure protection valves. The accessory lines may not prevent service brake line pressure loss due to failure or leakage in the accessory air system. Additionally, the air cushioned pintle hook may have been connected to the incorrect air lines. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."
Risk: Loss of service brake pressure can increase the risk of a crash.
Remedy: Altec will notify owners, and dealers will inspect the pressure protection installation and repair any unit that does not pass inspection, free of charge. The recall began August 15, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 724. The repair is free at any franchised dealer of your brand.
Read the full explainer → 19V-455 Open recall Jun 17, 2019
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 2017-2018 LR7, TA50/55/60 and L42/45 Aerial Devices. Multiple fasteners used to secure the rotation bearing may break, possibly resulting in the pedestal separating from the turntable.
Risk: If the pedestal separates from the turntable, it can increase the risk of injury or death.
Remedy: Altec will notify owners, and dealers will replace the affected fasteners, free of charge. The recall began July 31, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 722. The repair is free at any franchised dealer of your brand.
Read the full explainer → 19V-409 Open recall Jun 4, 2019
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 2016-2019 LR7 Series Aerial Devices. The aerial device can be operated without the rear outriggers being deployed, which may cause the unit to be unstable.
Risk: An unstable aerial device may suddenly collapse, increasing the risk of injury.
Remedy: Altec will notify owners, and dealers will inspect the vehicles and correct them to require the proper outrigger operation, as necessary, free of charge. The recall began July 25, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 720. The repair is free at any franchised dealer of your brand.
Read the full explainer → 19V-303 Open recall Apr 15, 2019
Altec Industries Inc.
EQUIPMENT:MECHANICAL
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, TA50, TA55, TA60, and TA45M-T50 Aerial Devices. The fasteners that are used to secure the turntable to the pedestal may fail.
Risk: If multiple fasteners fail, the pedestal and turntable may separate, increasing the risk of death or injury.
Remedy: Altec has notified owners and dealers will inspect and replace the defective fasteners, free of charge. The recall began April 18, 2019. Owners may contact Altec customer service 1-877-462-5832. Altec's number for this recall is MAB 716. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-873 Open recall Dec 7, 2018
Altec Industries Inc.
EXTERIOR LIGHTING:BRAKE LIGHTS
Altec Industries, Inc is recalling certain 2017-2018 Digger Derrick, Aerial Devices, and Service Body vehicles, equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such these vehicles fail to comply to with the requirements of Federal Motor Vehicle Safety Standard FMVSS 108, "Lamps, Reflective Devices, and Associated Equipment."
Risk: If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
Remedy: Altec will notify owners, and dealers will replace the brake lights, free of charge. The recall began February 7, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 708. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-847 Open recall Nov 28, 2018
Altec Industries Inc.
EQUIPMENT, STRUCTURE
Altec Industries, Inc. (Altec) is recalling certain 2017 Altec AT37, AT41 and AT48 aerial devices. Some of the fasteners that secure the pedestal to the chassis may be missing or may be loose which can cause a loss of stability or separation of the pedestal.
Risk: A pedestal that is not secure can increase the risk of injury.
Remedy: Altec will notify owners and will repair the vehicles, free of charge. The recall began January 31, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 706. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-792 Open recall Nov 9, 2018
Altec Industries Inc.
ELECTRICAL SYSTEM:WIRING
Altec Industries Inc. (Altec) is recalling certain 2017-2018 AT37-G, AT40, AT37, AT41, AT48 and L37M Aerial Devices. The under-hood wiring on these vehicles may be damaged by sharp edges within the engine bay area.
Risk: Damaged wiring can increase the risk of a fire.
Remedy: Altec will notify owners, and dealers will inspect the wiring, replacing any damaged protective loom and install an edge guard to the bracket area, free of charge. The recall began January 9, 2019. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 704. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-728 Open recall Oct 16, 2018
Altec Industries Inc.
ELECTRICAL SYSTEM
Altec Industries Inc. (Altec) is recalling certain 2015-2017 Altec TA45M and AM50/55 aerial devices equipped with 500W DC-DC converters. Due to voltage and current spikes, the converter can fail and cause a fire.
Risk: If the converter fails, it can increase the risk of a fire.
Remedy: Altec will notify owners, and dealers will replace the 500W DC-DC converter with one that has a revised design, free of charge. The recall began December 10, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 699. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-706 Open recall Oct 9, 2018
Altec Industries Inc.
STRUCTURE
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LR7, L42A and AT37-G TDA58 aerial devices and DB37, DL/DMB D2/3/4B, and DMB digger derricks, equipped with fiberglass platforms. The step on the outside of the fiberglass platform can break off during normal use.
Risk: If the step separates from the platform, it can increase the risk of injury.
Remedy: Altec will notify owners, and dealers will inspect the platform step and replace the platform if the step has separated from the platform and add a platform step reinforcing kit, free of charge. The recall began December 3, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 695. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-693 Open recall Oct 4, 2018
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 2017 Altec AT37, AT41 and AT48 aerial devices. The hydraulic line protective hose sock may have been incorrectly installed through the insulating section of the lower boom.
Risk: The incorrectly installed protective hose sock can cause the potential for electrical continuity through the lower boom, increasing the risk of an electrical shock.
Remedy: Altec will notify owners, and dealers will inspect the hydraulic hose bundle on the articulating arm and remove any hose sock in the insulated section, free of charge. The recall began November 14, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 693. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-553 Open recall Aug 22, 2018
Altec Industries Inc.
ELECTRICAL SYSTEM:12V/24V/48V BATTERY, ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
Altec Industries Inc. (Altec) is recalling certain 2017-2018 Altec LS63 Aerial Devices. The fuse for the battery was not installed to the guidelines. The incorrectly placed fuse may increase the risk for an electrical short.
Risk: An electrical short can increase the risk of a fire.
Remedy: Altec will notify owners, and dealers will inspect the battery fuse location, relocating it if necessary, free of charge. The recall is expected to begin October 15, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 691. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-552 Open recall Aug 22, 2018
Altec Industries Inc.
STRUCTURE
Altec Industries Inc. (Altec) is recalling certain 2008-2018 Aerial Devices equipped with aluminum work platforms. The platform mounting holes may fail, causing the platform to move unexpectedly.
Risk: If the platform moves unexpectedly, it can increase the risk of injury.
Remedy: Altec will notify owners, and dealers will install a bracket reinforcing kit, free of charge. The recall is expected to begin October 17, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 689. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-435 Open recall Jun 27, 2018
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 2017 Altec AT40M/S, TA41-48M/S, and L42A aerial devices. The high strength pedestal and turntable fasteners may experience corrosion cracking, causing them to fail.
Risk: If enough of the fasteners fail, the pedestal and turntable may separate from the vehicle, increasing the risk of injury.
Remedy: Altec will notify owners, and dealers will inspect the vehicles and replace any of the fasteners with a head marking of 3036, free of charge. The recall began August 23, 2018. Altec's number for this recall is CSN 687. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-434 Open recall Jun 27, 2018
Altec Industries Inc.
ELECTRICAL SYSTEM, ELECTRICAL SYSTEM:12V/24V/48V BATTERY
Altec Industries Inc. (Altec) is recalling certain 2016-2017 Altec Aerial Devices and Service Body vehicles, built on Ram 5500 Diesel chassis. The positive stud on the lead acid battery disconnect bracket may contact the hood and cause an electrical short.
Risk: An electrical short can increase the risk of a fire.
Remedy: Altec will notify owners, and dealers will replace the lead acid battery disconnect, free of charge. The recall began August 23, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 688. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-379 Open recall Jun 7, 2018
Altec Industries Inc.
ELECTRICAL SYSTEM
Altec Industries Inc. (Altec) is recalling certain 2016-2017 Altec Aerial Devices and Digger Derrick vehicles. The high voltage grounding system may be equipped with improperly sized cable connection receptacles causing the high voltage grounding system to fail.
Risk: If the grounding system fails, the user has an increased risk of injury.
Remedy: Altec will notify owners, and dealers will inspect the high voltage grounding system cable ring terminal connectors and replace any that are improperly sized, free of charge. The recall began on August 6, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 686. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-348 Open recall May 29, 2018
Altec Industries Inc.
TRAILER HITCHES
Altec Industries Inc. (Altec) is recalling certain 2012-2018 Altec LS63 and LS87 aerial devices equipped with a pintle hook mounted into the Class 3 receiver tube. This towing combination was shipped without a placard that provides the maximum allowable towing limit, possibly resulting in the receiver tube being overloaded.
Risk: An overloaded receiver tube could detach, increasing the risk of a crash.
Remedy: Altec will notify owners, and provide them with a placard that states the limit of the receiver tube assembly as 600lbs vertical load, and 6,000lbs towing capacity, free of charge. The recall began on July 25, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 684. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-345 Open recall May 25, 2018
Altec Industries Inc.
EQUIPMENT:OTHER:LABELS, STRUCTURE
Altec Industries Inc. (Altec) is recalling certain 2017 Altec TA48S aerial devices. The travel height of these vehicles may be greater than the indicated height on the decal that is located on the chassis dashboard.
Risk: If the travel height is higher than what is indicated on the decal, the vehicle may unexpectedly strike an overhead obstruction, increasing the risk of a crash.
Remedy: Altec will notify owners, and dealers will measure the vehicle's travel height, and if height is different than what is on the decals, the decals will be replaced, free of charge. The recall began on July 18, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 682. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-110 Open recall Feb 14, 2018
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 1997-2017 LRV, and LR7 Aerial devices. The platform leveling yoke may fail, possibly causing an occupant to fall from the platform.
Risk: Failure of the platform leveling yoke can cause the occupant of the platform to fall out, increasing their risk of injury.
Remedy: Altec will notify owners, and will inspect the leveling system to verify the correct alignment, replacing any improperly aligned yokes, free of charge. The recall began on April 11, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 672. The repair is free at any franchised dealer of your brand.
Read the full explainer → 18V-035 Open recall Jan 11, 2018
Altec Industries Inc.
ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS
Altec Industries Inc. (Altec) is recalling certain 2017 AT Aerial Devices mounted on Ford F-550 chassis. A circuit breaker located under the hood may contact the hood, potentially resulting in an electrical short.
Risk: An electrical short can increase the risk of a fire.
Remedy: Altec has notified owners, and dealers will update the circuit breaker bracket and install a insulating chafe pad, free of charge. The recall began on January 12, 2018. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is MAB 675. The repair is free at any franchised dealer of your brand.
Read the full explainer → 17V-560 Open recall Sep 11, 2017
Altec Industries Inc.
EQUIPMENT
Altec Industries Inc. (Altec) is recalling certain 2011-2017 Altec LS63 Aerial Devices. The jib mast on these vehicles may bend under load.
Risk: The jib mast may bend and fail, increasing the risk of injury to those nearby.
Remedy: Altec will notify owners and test the jib mast, replacing any that fail, free of charge. The recall began on October 13, 2017. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 664. The repair is free at any franchised dealer of your brand.
Read the full explainer →