Home/Recall report

2024 Mack Anthem (An) — federal recalls on file

6 federal recalls reported for the 2024 Mack Anthem (An)

These are federal recalls reported for the 2024 Mack Anthem (An). A recall may apply only to certain VIN ranges or production windows. To confirm whether your specific VIN is in the affected window, use NHTSA's official per-VIN lookup or enter your VIN on our check page.

25V-666 Open recall Oct 6, 2025

Mack Trucks, Inc.

SEAT BELTS:FRONT:ANCHORAGE

Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Mack MD, 2019-2025 Anthem, Granite, 2024 MD Electric, and 2025 Pinnacle trucks equipped with a passenger bench seat. The seat belt anchorage bracket may be improperly welded. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages."

Risk: An improperly welded seat belt anchorage bracket can detach during a crash, increasing the risk of injury.

Remedy: Dealers will install a reinforcement plate, free of charge. Owner letters were mailed January 21, 2026. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0485. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning October 13, 2025. The repair is free at any franchised dealer of your brand.

Read the full explainer →
24V-792 Open recall Oct 23, 2024

Mack Trucks, Inc.

ELECTRICAL SYSTEM:SOFTWARE, SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Mack Trucks, Inc. (Mack) is recalling certain 2020-2025 Anthem, Granite, TerraPro and Pinnacle vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.

Risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.

Remedy: Dealers will reprogram the ECU software, free of charge. Owner notification letters were mailed December 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0472. The repair is free at any franchised dealer of your brand.

Read the full explainer →
24V-567 Open recall Jul 30, 2024

Mack Trucks, Inc.

SEAT BELTS:CRITICAL FASTENERS, SEATS:CRITICAL FASTENERS

Mack Trucks, Inc. (Mack) is recalling certain 2024-2025 Anthem, Granite, and Pinnacle vehicles equipped with RollTek driver's seat assemblies. The seat pedestal and seat belt attachment may have been improperly tightened.

Risk: An improperly tightened seat pedestal and seat belt attachment may not restrain the occupant as intended, increasing their risk of injury during a crash.

Remedy: Dealers will replace and tighten the seat pedestal and seat belt attachment bolts, free of charge. Owner notification letters were mailed September 16, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0469. The repair is free at any franchised dealer of your brand.

Read the full explainer →
23V-899 Open recall Dec 26, 2023

Mack Trucks, Inc.

STEERING

Mack Trucks, Inc. (Mack) is recalling certain 2024 Anthem, Pinnacle, and Terrapro vehicles. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control.

Risk: A loss of steering control increases the risk of a crash.

Remedy: Dealers will inspect and replace the defective gears as necessary, free of charge. Owner notification letters were mailed February 9, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0457. The repair is free at any franchised dealer of your brand.

Read the full explainer →
23V-792 Open recall Nov 22, 2023

Mack Trucks, Inc.

VEHICLE SPEED CONTROL

Mack Trucks, Inc. (Mack) is recalling certain 2023-2024 GR, AN, LR, and Terrapro vehicles. The engine may not return to idle within 2 seconds if the accelerator pedal position sensor becomes disconnected. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 124, "Accelerator Control Systems."

Risk: An engine that does not return to idle quickly enough can cause a loss of vehicle control, increasing the risk of a crash.

Remedy: Mack will replace the throttle pedal and update the vehicle software, free of charge. Owner letters were mailed February 27, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0455. The repair is free at any franchised dealer of your brand.

Read the full explainer →
23V-691 Open recall Oct 13, 2023

Mack Trucks, Inc.

ELECTRONIC STABILITY CONTROL (ESC)

Mack Trucks, Inc. (Mack) is recalling certain 2024 Anthem and Pinnacle vehicles. A software programming error may cause the electronic stability control (ESC) to be inoperative.

Risk: Driving with an inoperative electronic stability control system can increase the risk of a crash.

Remedy: Dealers will reprogram the control unit software, free of charge. Owner notification letters are expected to be mailed December 3, 2023. Owners may contact Mack's customer service at 1-800-866-1177. Mack's number for this recall is SC0450. The repair is free at any franchised dealer of your brand.

Read the full explainer →