25V-853 Open recall Dec 10, 2025
Motor Coach Industries, Inc
STRUCTURE:BODY:DOOR, VISIBILITY:GLASS, SIDE/REAR
Motor Coach Industries (MCI) is recalling certain 102DL3, 102D3, MC12PTV, E4500, D4000, 102D3ISTV, D4500, J4500, D4000ISTV, D4005, D4505, and J3500 transit buses. Please refer to MCI's recall report for specific model year information. The front door lower curb view glazing material is incorrect. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) number 205, "Glazing Materials."
Risk: The incorrect window glazing material may reduce the driver's visibility, increasing the risk of a crash.
Remedy: MCI will replace the glass, free of charge. Owner notification letters were mailed February 4, 2026. Owners may contact MCI customer service at 1-800-241-2947. MCI's number for this recall is 22-005. The repair is free at any franchised dealer of your brand.
Read the full explainer → 13V-498 Open recall Oct 17, 2013
Motor Coach Industries
ELECTRICAL SYSTEM
Motor Coach Industries (MCI) is recalling certain model year 2000-2012 D, E, G and J series coaches manufactured January 2000 through June 2011 and equipped with Sure Power battery equalizers containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.
Risk: Once electrically conductive, the material is capable of melting and burning, increasing the risk of a fire.
Remedy: MCI will notify owners, and Sure Power will replace the equalizers, free of charge. Owners may contact MCI at 1-847-285-2000. This campaign is MCI service bulletin 401. The repair is free at any franchised dealer of your brand.
Read the full explainer → 11V-524 Open recall Oct 26, 2011
MOTOR COACH INDUSTRIES, INC
ELECTRONIC STABILITY CONTROL (ESC)
MOTOR COACH INDUSTRIES (MCI) IS RECALLING CERTAIN MODEL YEAR 2003, AND 2007-2012 E AND J MODELS ALONG WITH MODEL YEAR 2007-2012 D4000, D4005, D4500, D4505, D4000ISTV MOTOR COACHES EQUIPPED WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) MODULES, MANUFACTURED FROM OCTOBER 2002, THROUGH OCTOBER 2011. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.
Risk: IF THE DRIVER IS SLOW TO REACT DURING THIS ESC INTERVENTION, THE VEHICLE MAY DEVIATE FROM THE INTENDED LINE OF TRAVEL, INCREASING THE RISK OF A CRASH.
Remedy: MCI WILL NOTIFY OWNERS AND REPLACE THE CONTROL MODULE FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 4, 2012. OWNERS MAY CONTACT MCI CUSTOMER SERVICE AT 1-800-241-2947. The repair is free at any franchised dealer of your brand.
Read the full explainer → 10V-409 Open recall Sep 9, 2010
MOTOR COACH INDUSTRIES, INC
SEATS
MCI IS RECALLING CERTAIN MODEL YEAR 2009-2010 D4005 AND D4505 MOTOR COACHES EQUIPPED WITH A NATIONAL SEATING COMPANY DRIVER'S SEAT CONTAINING A STABILUS BLOC-O-LIFT SHOCK. THE DRIVER'S SEAT SHOCK DAMPER MAY BREAK ALLOWING THE DRIVER'S SEAT TO UNEXPECTEDLY DROP TO THE FLOOR WITHOUT WARNING.
Risk: IN THE EVENT THIS SHOULD OCCUR WHILE THE BUS IS IN OPERATION, THE DRIVER MAY LOSE CONTROL OF THE VEHICLE, POSSIBLY RESULTING IN A CRASH.
Remedy: MCI WILL NOTIFY OWNERS AND REPLACE THE SEAT SHOCK AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 15, 2010. OWNERS MAY CONTACT MCI CUSTOMER SERVICE AT 1-800-241-2947. The repair is free at any franchised dealer of your brand.
Read the full explainer → 10V-199 Open recall May 11, 2010
MOTOR COACH INDUSTRIES, INC
POWER TRAIN:AXLE ASSEMBLY
MCI IS RECALLING CERTAIN MODEL YEAR 2010 D4000, D4005, D4500, D4505, E4500, AND J4500 MODEL MOTOR COACHES MANUFACTURED FROM SEPTEMBER 2009 THROUGH MAY 2010, EQUIPPED WITH ARVINMERITOR FRONT AND TAG AXLE ASSEMBLIES. THE SUSPECT AXLES MAY HAVE HAD IMPROPER TORQUE APPLIED TO THE HUB/ROTOR/WHEEL ADAPTER BOLTS DURING THE ASSEMBLY PROCESS. REDUCED BOLT TORQUE COULD LEAD TO VIBRATION LOOSENING OF THE BOLT.
Risk: THIS COULD RESULT IN A LOSS OF THE WHEEL POSSIBLY RESULTING IN A CRASH.
Remedy: MCI WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE MOTOR COACHES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 28, 2010. OWNERS MAY CONTACT MCI AT 1-800-241-2947. The repair is free at any franchised dealer of your brand.
Read the full explainer →