Home/ Recalls/ Fly E-Bike/ 26V036
Campaign 26V036 Posted January 23, 2026 1,835 units

2022-2024 Fly E-Bike FLY-10 Recall 26V036: Wheel Hub

Recall 26V036 affects 1,835 2022-2024 Fly E-Bike FLY-10 scooters for rear wheel hubs without DOT markings. Repair is free at any franchised Fly E-Bike dealer.

Fly E-Bike is recalling 1,835 2022-2024 FLY-10 scooters over a rear wheel hub DOT-marking issue. A hub without the proper marking can be hard to identify and can indicate improper assembly or installation, increasing crash or injury risk; Fly E-Bike dealers will complete the recall repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The rear wheel hub on the 2022-2024 Fly E-Bike FLY-10 is the center section of the rear wheel assembly. On these electric scooters, it also sits with the rear hub motor setup and supports the wheel, tire, and related hardware. The DOT marking is a required identification mark, not a performance part; it tells an inspector or service technician that the wheel hub meets the required standard.

On affected FLY-10 scooters, the rear wheel hub was built without that DOT marking. The problem is a compliance defect identified after review of NHTSA test results for FMVSS 123, Motorcycle Controls and Displays. The recall part difference is straightforward: the replacement rear wheel includes the required DOT mark, while the recalled hub does not.

There is no warning sign before failure. This is not a problem an owner can hear, feel, or see during normal riding unless the rear wheel hub is inspected for the required marking.

Who's affected?

The scope spans 2022, 2023, and 2024 FLY-10 motorcycles, with 2024 listed under both Fly E-Bike and Fwmoto for the same rear rim wheel hardware.

2022 Fly E-Bike FLY-10 wheel hardware
2023 Fly E-Bike FLY-10 wheel hardware
2024 Fly E-Bike FLY-10 wheel hardware
2024 Fwmoto FLY-10 wheel hardware
Units affected1,835
Field incidentsNHTSA has logged no field incidents to date.

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific motorcycle is included.

What's the safety risk?

An improperly assembled rear wheel hub, or one installed without the required part markings, increases the risk of a crash or injury. There are no specific or consistent warning signs before the noncompliance, so schedule the recall repair soon. Repair is free at any franchised Fly E-Bike dealer.

What should I do?

  1. Check your VIN to confirm your 2022-2024 Fly E-Bike FLY-10 scooter is included in this recall.
  2. Contact Fly E-Bike customer service at 646-961-5177 to schedule the free rear wheel hub replacement or repurchase.
  3. Ask for the rear wheel hub replacement that corrects the missing DOT marking and part-identification issue.
  4. Bring the recall notice if you received one. Reference recall number 26V036 when you call.
  5. Limit riding until the repair is complete, since the wheel hub issue increases the risk of a crash or injury.

What happens at the repair

At the dealer, a Fly E-Bike technician replaces the rear wheel hub, free under the recall. Fly E-Bike also lists vehicle repurchase as an available remedy. If you already paid to replace or buy the specified rear hub components before receiving the recall notice, Fly E-Bike's reimbursement process covers documented expenses. Submit valid receipts and proof of payment using the procedure sent by mail or email. Reimbursement covers replacement parts and labor, up to $25 per vehicle, within 6 months of the notification date.

ReimbursementReimbursement available

Timeline

January 23, 2026 NHTSA published the recall
February 1, 2026 Dealer notification began
March 15, 2026 Dealer notification ended
March 27, 2026 Owner notification mailed

Frequently asked questions

What is recall 26V036?

Recall 26V036 covers 1,835 2022-2024 Fly E-Bike FLY-10 scooters with a rear wheel hub that lacks the required DOT marking. The hub can be improperly assembled or installed without proper part identification, increasing the risk of a crash or injury.

What should I do if my 2022-2024 Fly E-Bike FLY-10 is on this recall?

Check your VIN to confirm your specific scooter is included in recall 26V036. If it is, contact Fly E-Bike customer service at 646-961-5177 or support@flyebike.com to arrange the rear wheel hub replacement or vehicle repurchase. The repair path is free.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to correct the defect at no cost. Fly E-Bike will replace the rear wheel hub free of charge or repurchase the scooter under recall 26V036.

What is the safety risk?

The safety risk is an increased risk of crash or injury. The rear wheel hub lacks the DOT marking needed to identify the part, and the hub can be improperly assembled or installed. If your VIN is included, arrange the free remedy with Fly E-Bike.

When were owners notified about recall 26V036?

Fly E-Bike mailed owner notification letters on March 27, 2026. If you bought the scooter used or never received a letter, check your VIN and reference recall 26V036 when you contact Fly E-Bike customer service.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/26V036000
Fly E-Bike customer service646-961-5177
NHTSA recall #26V036
NHTSA recall # (full)26V036000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 19, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →