Recall 25V273 affects 128,889 2022-2023 Ford Bronco vehicles because the 360-degree camera can lose the rearview image. Repair is free at any franchised Ford dealer.
Ford is recalling 128,889 2022-2023 Bronco vehicles because the 360-degree view camera can fail to show the rear image when the vehicle is in reverse. That loss of rear visibility increases crash risk, and Ford dealers will complete the recall repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The 2022-2023 Ford Bronco uses a digital rearview camera as part of the optional 360-degree camera system. When the Bronco is shifted into reverse, that camera is supposed to send the rearview image to the center display so the driver can see behind the vehicle.
In recalled Broncos, the problem is inside the camera connector. Heat changes inside the vehicle create tiny movement between tin-plated contact surfaces, which forms tin oxide and weakens the electrical connection. Ford also traced the issue to connector misalignment during manufacturing, which can deform the contact point and stop the camera signal from reaching the display.
There is no warning sign before failure. The camera can work on one drive and fail to show the rearview image the next time the Bronco is shifted into reverse.
Who's affected?
Covers the 2022 and 2023 model years for the same rear camera component.
| 2023 Ford Bronco | Camera |
|---|---|
| 2022 Ford Bronco | Camera |
| Units affected | 128,889 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific SUV is included.
What's the safety risk?
If the rearview camera image is lost, the driver has less view of what is behind the vehicle, increasing the risk of a crash while backing up. There is no warning sign before the image is lost, so use mirrors and direct checks until the camera is repaired. Repair is free at any franchised Ford dealer.
What should I do?
- Check your VIN to confirm your 2022-2023 Ford Bronco is included in this recall.
- Contact a franchised Ford dealer to schedule the free rearview camera replacement that fixes the rearview image failure in reverse.
- Bring the recall notice if you received one. Reference recall number 25V273 and Ford recall 23S48 when you call.
- Use mirrors and look behind the Bronco when backing up until the rearview-camera repair is complete.
What happens at the repair
At the dealer, a Ford technician replaces the rearview camera covered by the recall. The replacement parts and labor are free under the recall. If you already paid for this camera repair before the owner notice, Ford's recall reimbursement plan covers eligible expenses paid by owners. Bring receipts and repair paperwork to the service desk, or contact Ford Customer Service for the claim path.
| Reimbursement | Reimbursement available |
|---|
Timeline
| April 28, 2025 | Dealer notification began |
|---|---|
| April 28, 2025 | Dealer notification ended |
| May 5, 2025 | Interim owner notification (was planned for this date) |
| May 14, 2025 | NHTSA published the recall |
| October 8, 2025 | Owner notification mailed |
Frequently asked questions
What is recall 25V273?
Recall 25V273 covers 128,889 2022-2023 Ford Bronco vehicles with a 360-degree view camera that can fail to show a rearview image in reverse. That loss reduces the driver's view behind the vehicle and increases crash risk. Ford dealers will replace the rearview camera for free.
What should I do if my 2022-2023 Ford Bronco is on this recall?
Check your VIN to confirm your specific Bronco is included in recall 25V273. If it is, contact a franchised Ford dealer to schedule the rearview camera replacement. Reference Ford recall number 23S48 when you call. The dealer repair is free.
Is the Ford Bronco recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Ford's remedy says dealers will replace the rearview camera free of charge. The free repair applies at any franchised Ford dealer, regardless of where the vehicle was purchased.
Is it safe to drive a Ford Bronco with this rearview camera recall?
The recall does not say to stop driving, but the rearview camera defect reduces the driver's view behind the vehicle and increases crash risk. Use extra care when reversing until the camera is replaced, and schedule the free dealer repair after your VIN confirms the recall applies.
When were owners notified about recall 25V273?
Ford mailed owner notification letters on October 8, 2025. If you bought the Bronco used or never received a letter, check your VIN to confirm whether your specific vehicle is included, then call a franchised Ford dealer and reference recall number 25V273.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/25V273000 |
|---|---|
| Ford customer service | 1-866-436-7332 |
| NHTSA recall # | 25V273 |
| NHTSA recall # (full) | 25V273000 |
Source documents
-
Download Quarterly Report (PDF) - Download Recall Document (PDF) (PDF)
- Download Recall Document (PDF) (PDF)
- Download Misc. Document (PDF)
- Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Recall Report (PDF)
- Download Recall Document (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 19, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →