Recall 23V483 covers 4 2021 Mvt-900a MVT-3001-G surveillance trailers for a fuel-hose clamp defect. Repair is free at any franchised Mvt-900a dealer.
Mvt-900a is recalling 4 2021 MVT-3001-G surveillance trailers equipped with certain Cummins Onan generator sets because weak clamp force on the fuel hose can allow gasoline to leak. A leak near an ignition source increases fire risk, and the dealer repair is free.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The 2021 Mvt-900a MVT-3001-G surveillance trailer uses a Cummins Onan QG 2800i or Onan QG 2800i EVAP generator set for onboard power. A gasoline fuel hose runs between the inline fuel filter and the Injection Pump Module, the pump assembly that sends filtered fuel into the generator. That hose is supposed to stay sealed while fuel moves through the system.
On affected trailers, the hose specification did not give the connection enough clamp force. The hose connection can loosen enough for gasoline to leak between the filter and the Injection Pump Module. The remedy hose is a different part, identified by part number A073T925, so the dealer or service provider can replace the suspect hose with the corrected one.
The warning sign is visible gasoline or the smell of gasoline near the trailer or generator. If you notice either, keep people away from the area and tell the servicing dealer exactly what you saw or smelled.
Who's affected?
| 2021 Mvt-900a MVT-3001-G | fuel system |
|---|---|
| Units affected | 4 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether this recall applies to your specific vehicle.
What's the safety risk?
A gasoline leak near an ignition source increases the risk of fire. People nearby can see or smell gasoline, so treat any fuel odor or visible leak as a reason to stop in a safe place, keep ignition sources away, and call the dealer. Repair is free at any franchised Mvt-900a dealer.
What should I do?
- Check your VIN to confirm your 2021 Mvt-900a MVT-3001-G is included in this recall.
- Contact a franchised Mvt-900a dealer to schedule the free fuel-hose and clamp inspection that addresses the gasoline leak risk.
- Bring the recall notice if Mvt-900a mailed one. If not, reference recall number 23V483 when you call.
- Keep the trailer away from ignition sources until the fuel-hose inspection and repair is complete.
- Call Mvt-900a customer service at 1-617-467-3059 with questions.
What happens at the repair
At the dealer, a Mvt-900a technician inspects the fuel hose between the inline fuel filter and the Injection Pump Module, then replaces the fuel hose and clamps if the inspection shows they need replacement. The recall repair is free, including parts and labor. If you already paid for this fuel hose or clamp repair, Cummins says a recall-specific reimbursement plan is provided through the Recall Portal for units not covered by the manufacturer's limited warranty. Keep repair invoices and warranty paperwork for that claim.
| Reimbursement | Reimbursement available |
|---|
Timeline
| July 13, 2023 | NHTSA published the recall |
|---|---|
| August 8, 2023 | Owner notification mailed |
| August 8, 2023 | Interim owner notification (was planned for this date) |
Frequently asked questions
What is recall 23V483?
Recall 23V483 covers 4 2021 Mvt-900a MVT-3001-G surveillance trailers equipped with Cummins Onan QG 2800i and Onan QG 2800i EVAP generator sets. The fuel hose between the inline fuel filter and injection pump module can leak gasoline because of inadequate clamp force.
What should I do if my 2021 Mvt-900a MVT-3001-G is on this recall?
Check your VIN to confirm your specific surveillance trailer is included in recall 23V483. If it is, contact a franchised Mvt-900a dealer or IV & C customer service at 1-617-467-3059 to arrange the fuel hose and clamp inspection. The recall repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and the remedy for recall 23V483 is free. Dealers will inspect the fuel hose and replace the hose and clamps when needed.
What is the safety risk?
The safety risk is fire. Recall 23V483 involves a gasoline leak between the inline fuel filter and injection pump module. A gasoline leak near an ignition source increases the risk of fire, so confirm your VIN and arrange the free dealer inspection.
When were owners notified about recall 23V483?
Owner notification letters were mailed on August 8, 2023. If you bought the surveillance trailer used or never received a letter, check your VIN and reference recall 23V483 when you call the dealer or IV & C customer service.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/23V483000 |
|---|---|
| Mvt-900a customer service | 1-617-467-3059 |
| NHTSA recall # | 23V483 |
| NHTSA recall # (full) | 23V483000 |
Source documents
-
Download Quarterly Report (PDF) - Download Recall Report (PDF)
- Download Owner Notification Letter (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 20, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →