Home/ Recalls/ Subaru/ 23V292
Campaign 23V292 Posted April 25, 2023 4,030 units

2023 Subaru Impreza Recall 23V292: Brake Switch Defect

Recall 23V292 affects 4,030 2023 Subaru Impreza vehicles for an improperly adjusted brake-light switch. Repair is free at any franchised Subaru dealer.

Subaru is recalling 4,030 2023 Impreza vehicles because an improperly adjusted brake light switch can turn on the brake lights when the pedal is not pressed and let the transmission shift out of PARK without brake-pedal input. The fault can confuse other drivers or let the vehicle roll away, which increases crash risk; Subaru dealers will complete the repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The brake light switch is a small switch mounted at the brake pedal assembly. When the driver presses the pedal, the switch tells the rear brake lights to turn on. On the 2023 Subaru Impreza, that same signal also supports the starter and shift interlock, which are supposed to require brake-pedal pressure before the vehicle starts or shifts out of PARK.

On affected Imprezas, the switch was not adjusted correctly during assembly. The gap between the switch and the pedal stopper was not set to the specified position. Because of that, the vehicle can read the brake pedal as applied when it is not. That false signal can turn on the brake lights and allow the transmission to shift out of PARK without the driver pressing the brake pedal.

There is no warning sign before failure. People outside the vehicle can see the brake lights turn on when the pedal is not pressed. The driver can also find that the vehicle starts or shifts out of PARK without normal brake-pedal input.

Who's affected?

2023 Subaru Impreza Switch
Units affected4,030
Field incidentsNHTSA has logged no field incidents to date.

A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific car is included in this recall.

What's the safety risk?

Unintentional brake light illumination can make it harder for other drivers to tell when you are actually braking. The vehicle can also shift out of park unexpectedly and roll away, increasing crash risk. Have the brake light switch inspected and adjusted. Repair is free at any franchised Subaru dealer.

What should I do?

  1. Check your VIN to confirm your 2023 Subaru Impreza is included in this recall.
  2. Contact a franchised Subaru dealer to schedule the free brake-light-switch inspection and adjustment that fixes the improper brake light and shift-interlock condition.
  3. Bring the recall notice if Subaru mailed one. If not, reference recall number 23V292 and Subaru recall WRI-23 when you call.
  4. Avoid leaving the vehicle unattended unless it is fully in PARK with the parking brake set until the repair is complete.

What happens at the repair

At the dealer, a Subaru technician inspects the gap between the brake light switch and stopper and adjusts the switch if needed. The recall repair is free, with parts and labor covered. If you've already paid for a related brake light switch repair before the recall notice, Subaru provides reimbursement under its general reimbursement plan submitted in May 2022. Bring repair invoices, receipts, and proof of payment to the Subaru service desk or contact Subaru customer service at 1-844-373-6614 for claim instructions.

ReimbursementReimbursement available

Timeline

April 25, 2023 NHTSA published the recall
April 25, 2023 Dealer notification began
April 25, 2023 Dealer notification ended
May 19, 2023 Owner notification mailed
June 23, 2023 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
June 23, 2023 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 23V292?

Recall 23V292 covers 4,030 2023 Subaru Impreza vehicles with an improperly adjusted brake light switch. The brake lights can illuminate without brake pedal use, and the vehicle can shift out of PARK without the brake pedal, increasing crash risk. Subaru dealers will inspect and adjust the switch for free.

What should I do if my 2023 Subaru Impreza is on this recall?

Check your VIN to confirm your specific 2023 Subaru Impreza is included in recall 23V292. If it is, contact a franchised Subaru dealer to schedule the brake light switch inspection and adjustment. Reference recall WRI-23 or campaign 23V292 when you call. The repair is free.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Subaru dealers will inspect the gap between the brake light switch and stopper, then adjust the switch as needed, free of charge.

Is it safe to drive my 2023 Subaru Impreza before recall 23V292 is fixed?

Subaru did not tell owners to stop driving for recall 23V292. The safety concern is that incorrect brake light behavior or unexpected movement out of PARK can increase crash risk. Confirm your VIN and schedule the free dealer repair as soon as the dealer has an appointment available.

What if I bought my 2023 Subaru Impreza used?

The free recall repair still applies. Federal recall law follows the vehicle, not the first owner. If Subaru did not mail you a notice, check your VIN to confirm whether your Impreza is included, then contact a franchised Subaru dealer and reference recall 23V292.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/23V292000
Subaru customer service1-844-373-6614
NHTSA recall #23V292
NHTSA recall # (full)23V292000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 20, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →