Recall 22V825 covers 47,046 2021-2022 Ford Bronco SUVs because the rearview camera image stays on. Repair is free at any franchised Ford dealer.
Ford is recalling 47,046 2021-2022 Bronco vehicles with 8-inch screen displays because the rearview camera image can stay on after a backing event ends. That lingering image can distract the driver after shifting out of reverse and raise crash risk; Ford dealers will update the rearview camera system free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The rearview camera system on the 2021-2022 Ford Bronco is supposed to show the area behind the SUV only during a backing event. On these Broncos, the camera works through the SYNC software and the 8-inch center display. That display helps the driver see behind the vehicle while reversing.
The problem is in the SYNC software configuration for 4-Low mode. When the driver finishes backing up, the rearview camera image stays on the screen instead of clearing at the proper time. That leaves the display showing a view that no longer matches what the vehicle is doing, which is why the system fails the rear visibility requirement.
There is no warning sign before failure. An owner would notice the problem only when the camera image remains on the 8-inch display after the backing event has ended.
Who's affected?
Both model years use the same SYNC software part tied to the camera system.
| 2021 Ford Bronco | Camera |
|---|---|
| 2022 Ford Bronco | Camera |
| Units affected | 47,046 |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific SUV is included.
What's the safety risk?
A rearview camera image that stays on after shifting out of reverse can pull attention away from the road and increase crash risk. If the display does not clear, keep your attention on traffic and schedule service soon. Repair is free at any franchised Ford dealer.
What should I do?
- Check your VIN to confirm your 2021-2022 Ford Bronco is included in this recall.
- Contact a franchised Ford dealer to schedule the free SYNC software update that stops the rearview camera image from staying on after reverse.
- Ask whether Ford can complete the software update over the air before you schedule a service visit.
- Bring the recall notice if Ford mailed one. If not, reference recall number 22V825 when you call.
- Avoid relying on a stale rearview camera image after shifting out of reverse. Use mirrors and look around the vehicle until the update is complete.
What happens at the repair
At the dealer, a Ford technician updates the SYNC module software that controls the rearview camera display. Ford can also deliver the same software fix through an over-the-air update. The recall repair is free, and parts and labor are covered when a dealer performs it. Ford's standard reimbursement plan covers eligible owner-paid remedy costs before the recall notice, with eligibility ending January 15, 2023. Ask the service desk what documentation Ford needs for a reimbursement claim.
| Reimbursement | Reimbursement available |
|---|
Timeline
| November 3, 2022 | NHTSA published the recall |
|---|---|
| December 16, 2022 | Dealer notification began |
| December 16, 2022 | Dealer notification ended |
| December 19, 2022 | Interim owner notification (was planned for this date) |
| December 23, 2022 | Owner notification mailed |
Frequently asked questions
What is recall 22V825?
Recall 22V825 covers 47,046 2021-2022 Ford Bronco vehicles with rearview camera systems and 8-inch screen displays. The camera image can stay on after backing ends, distracting the driver and increasing crash risk. Ford will update the SYNC module software for free.
What should I do if my 2021-2022 Ford Bronco is on this recall?
Check your VIN to confirm your specific Bronco is included in recall 22V825. If it is, contact a franchised Ford dealer to schedule the SYNC module software update, or ask whether the over-the-air update is available for your vehicle. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires Ford to repair the defect at no cost, and Ford's remedy for recall 22V825 is a free SYNC module software update through a dealer or an over-the-air update.
Is it safe to drive my Bronco before the recall repair?
Ford has not issued a do-not-drive order for recall 22V825. The risk is distraction from a rearview image that stays on after shifting out of reverse. Confirm your VIN, then arrange the free software update with a franchised Ford dealer.
When were owners notified about recall 22V825?
Ford mailed owner notification letters on March 25, 2024. If you bought the Bronco used or never received a letter, check your VIN to confirm whether your specific vehicle is included, then reference recall 22V825 when you call a Ford dealer.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/22V825000 |
|---|---|
| Ford customer service | 1-866-436-7332 |
| NHTSA recall # | 22V825 |
| NHTSA recall # (full) | 22V825000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Quarterly Report (PDF)
- Download Recall Document (PDF) (PDF)
- Download Owner Notice (PDF)
- Download Owner Notification Letter (PDF)
- Download Misc. Document (PDF)
- Download Recall Acknowledgement (PDF)
- Download Recall Report (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 20, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →