Home/ Recalls/ Can-Am/ 22V799
Campaign 22V799 Posted October 22, 2022 46,119 units

2019-2023 Can-Am Ryker Recall 22V799: Wiring Harness

Recall 22V799 affects 46,119 2019-2023 Can-Am Ryker motorcycles for wiring that can short and stall the engine. Free repair at any franchised Can-Am dealer.

Can-Am is recalling 46,119 2019-2023 Ryker motorcycles because the position light and flasher electrical harnesses in the front fenders can loosen and rub against the tire. That contact can short the circuit and stall the engine while riding, which increases crash risk; Can-Am dealers will complete the recall repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

On 2019-2023 Can-Am Ryker motorcycles, the position light and flasher electrical harnesses carry power to the front fender lights and turn signals. These harnesses should be routed and fastened inside the front fenders so they stay clear of the front tires. The same Fuse #7 also protects other key circuits, so this wiring problem is not limited to lighting.

On affected Rykers, the harness routing at the factory was not installed as the design required. A loose harness can contact a front tire, and tire rub can wear through the wire insulation. That contact can create a short circuit and blow Fuse #7. When that happens, the engine stalls while driving and cannot restart. The Vehicle Stability System, including ABS, is unavailable after the stall, which increases the risk of a crash.

There is no warning sign before failure. BRP did not identify a light, sound, or handling change that alerts the rider before the harness shorts and the fuse blows.

Who's affected?

Spans 5 Ryker model years, all tied to the same wiring harness.

2020 Can-Am Ryker wiring
2019 Can-Am Ryker wiring
2021 Can-Am Ryker wiring
2022 Can-Am Ryker wiring
2023 Can-Am Ryker wiring
Units affected46,119
Field incidentsNHTSA has logged 48 field incidents to date.

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific motorcycle is included.

What's the safety risk?

An engine stall while riding can leave you without propulsion in traffic and increase the risk of a crash. There is no warning sign before failure, so schedule the recall repair soon and ride cautiously until it is complete. Repair is free at any franchised Can-Am dealer.

What should I do?

  1. Check your VIN to confirm your 2019-2023 Can-Am Ryker is included in this recall.
  2. Contact your nearest franchised Can-Am dealer to schedule the free harness-securing repair that keeps the front-fender wiring from rubbing the tire and causing an engine stall.
  3. Bring the recall notice if you have it, and reference recall number 22V799 when you call.
  4. Ride cautiously until the repair is complete, and stop in a safe place if the engine stalls.

What happens at the repair

At the dealer, a Can-Am technician secures the two front fender electrical harnesses for the position lights and flashers so they do not loosen and rub against the tire. The recall repair is free, and the vehicle still needs this repair even if a prior related repair was done. If you previously paid to fix the same issue and BRP did not cover the cost, contact BRP to request reimbursement under its general reimbursement plan.

ReimbursementReimbursement available

Timeline

October 22, 2022 NHTSA published the recall
October 31, 2022 Dealer notification began
October 31, 2022 Dealer notification ended
October 31, 2022 Owner notification mailed
November 30, 2022 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
November 30, 2022 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 22V799?

Recall 22V799 covers 46,119 2019-2023 Can-Am Ryker motorcycles with front-fender position light and flasher harnesses that can loosen and rub on the tire. That contact can cause a short circuit and an engine stall while driving, increasing crash risk.

What should I do if my 2019-2023 Can-Am Ryker is on this recall?

Check your VIN to confirm your specific Ryker is included in recall 22V799. If it is, contact a franchised Can-Am dealer to schedule the harness repair. The dealer will secure the position light and flasher harnesses for free.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to perform the recall repair at no cost. For recall 22V799, Can-Am dealers will secure the two front-fender electrical harnesses free of charge.

Is it safe to ride a Can-Am Ryker with this recall?

The recall risk is an engine stall while driving, which increases crash risk. If your VIN is included, schedule the free repair with a franchised Can-Am dealer before regular riding. Ask the dealer what to do if the vehicle stalls or feels unsafe to ride.

When were owners notified about recall 22V799?

Owner notification letters were mailed December 9, 2022. If you bought the Ryker used or never received a letter, check your VIN and reference recall 22V799 when you call a franchised Can-Am dealer or Bombardier customer service at 1-888-272-9222.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/22V799000
Can-Am customer service1-888-272-9222
NHTSA recall #22V799
NHTSA recall # (full)22V799000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 20, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →