Recall 21V627 affects 1,506 2018-2020 Husqvarna Vitpilen 701 and Svartpilen 701 motorcycles for license plate bracket interference. Repair is free at any franchised Husqvarna dealer.
Husqvarna is recalling 1,506 2018-2020 Vitpilen 701 and Svartpilen 701 motorcycles for gear teeth on the license plate holder and swingarm that are positioned incorrectly. That defect can loosen the rear axle nut and let the license plate holder contact the rear wheel, which increases crash or injury risk; Husqvarna dealers will repair it free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The license plate holder support on 2018-2020 Husqvarna Vitpilen 701 and Svartpilen 701 motorcycles sits near the rear wheel and carries the license plate assembly. It also interfaces with the swingarm, the rear suspension arm that holds the rear wheel in position. The gear teeth at that joint are meant to line up and keep the assembly fixed while the axle nut stays tight.
On affected motorcycles, those gear teeth were assembled out of alignment. That misalignment lets the rear axle nut loosen over time. If the nut backs off, the license plate bracket can drop toward the rear tire and contact the wheel while the motorcycle is moving.
There is no warning sign before failure. A rider should not count on hearing noise, feeling looseness, or seeing the bracket move before the axle nut has already lost clamp force.
Who's affected?
Covers both Vitpilen 701 and Svartpilen 701 across the 2018, 2019, and 2020 model years, with the license plate holder support tied to the rear suspension and body structure.
| 2020 Husqvarna Vitpilen 701 | body or structural component |
|---|---|
| 2020 Husqvarna Vitpilen 701 | rear suspension |
| 2019 Husqvarna Vitpilen 701 | body or structural component |
| 2019 Husqvarna Vitpilen 701 | rear suspension |
| 2020 Husqvarna Svartpilen 701 | body or structural component |
| 2020 Husqvarna Svartpilen 701 | rear suspension |
| 2019 Husqvarna Svartpilen 701 | body or structural component |
| 2019 Husqvarna Svartpilen 701 | rear suspension |
| 2018 Husqvarna Vitpilen 701 | body or structural component |
| 2018 Husqvarna Vitpilen 701 | rear suspension |
| Units affected | 1,506 |
| Field incidents | NHTSA has logged 1 field incident to date. |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific motorcycle is included.
What's the safety risk?
If the license plate bracket interferes with the rear wheel, the rider faces a higher risk of crash or injury. There is no warning sign before interference occurs, so schedule the recall repair soon and stop riding if you see contact at the rear wheel. Repair is free at any franchised Husqvarna dealer.
What should I do?
- Check your VIN to confirm your 2018-2020 Husqvarna Vitpilen 701 or Svartpilen 701 motorcycle is included in this recall.
- Contact a franchised Husqvarna dealer to schedule the free gear-teeth realignment and rear axle collar check that keeps the license plate holder from contacting the rear wheel.
- Bring the recall notice if Husqvarna mailed one. If not, reference recall number 21V627 and Husqvarna recall HTB2106 when you call.
- Ride cautiously until the repair is complete. Keep the motorcycle parked if the license plate holder contacts the rear wheel.
What happens at the repair
At the dealer, a Husqvarna technician inspects and realigns the gear teeth on the license plate holder and swingarm, then checks the tightness of the rear wheel axle collar. The recall repair is free, with parts and labor covered. If you've already paid out of pocket for this repair, Husqvarna's general reimbursement plan is on file. Contact Husqvarna customer service or ask the service desk how to submit documentation for reimbursement review.
| Reimbursement | Reimbursement available |
|---|
Timeline
| August 10, 2021 | NHTSA published the recall |
|---|---|
| August 10, 2021 | Dealer notification began |
| August 17, 2021 | Interim owner notification (was planned for this date) |
| October 1, 2021 | Owner notification mailed |
| July 22, 2022 | Dealer notification ended |
Frequently asked questions
What is recall 21V627?
Recall 21V627 covers 1,506 2018-2020 Husqvarna Vitpilen 701 and Svartpilen 701 motorcycles with license plate holder and swingarm gear teeth that can be misaligned. That can loosen the rear axle nut and let the license plate holder contact the rear wheel, increasing crash or injury risk.
What should I do if my 2018-2020 Husqvarna Vitpilen 701 or Svartpilen 701 is on this recall?
Check your VIN to confirm your specific motorcycle is included in recall 21V627. If it is, contact a franchised Husqvarna dealer to schedule the inspection and realignment. Reference recall number 21V627 or Husqvarna recall HTB2106 when you call.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair this defect at no cost. Husqvarna dealers will inspect and realign the license plate holder and swingarm gear teeth, then inspect the rear wheel axle collar tightness, free of charge.
What is the safety risk on this Husqvarna recall?
The safety risk is rear wheel interference. If the license plate holder contacts the rear wheel after the axle nut loosens, the motorcycle can become harder to control, increasing the risk of a crash or injury. The dealer repair addresses the alignment and rear axle collar tightness.
When were owners notified about recall 21V627?
Owner notification letters were mailed on October 1, 2021. Used motorcycles do not always stay connected to the original mailing address, so the VIN check still matters. If your VIN is included, call a franchised Husqvarna dealer and ask for recall HTB2106.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/21V627000 |
|---|---|
| Husqvarna customer service | 1-888-985-6090 |
| NHTSA recall # | 21V627 |
| NHTSA recall # (full) | 21V627000 |
Source documents
-
Download Quarterly Report (PDF) - Download Recall Document (PDF) (PDF)
- Download Misc. Document (PDF)
- Download Recall Investigation Document (PDF) (PDF)
- Download Owner Notification Letter (PDF)
- Download Recall Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 20, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →