Home/ Recalls/ Ducati/ 19V825
Campaign 19V825 Posted November 18, 2019 493 units

2018 Ducati Multistrada 1260 Recall 19V825: Side Stand Weld

Recall 19V825 affects 493 2018 Ducati Multistrada 1260 motorcycles for an improperly welded side stand that can break. Repair is free at any franchised Ducati dealer.

Ducati is recalling 493 2018 Multistrada 1260 motorcycles under recall 19V825 because the side stand was improperly welded and can break. If the stand fails, the motorcycle can fall over and injure the rider or a bystander, and a Ducati dealer will replace the side stand free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The side stand on the 2018 Multistrada 1260, 1260S, and Pikes Peak is the small leg that swings down from the left side of the frame to hold the motorcycle upright when parked. It is a welded steel tube that has to carry the full weight of the bike, plus any side load when the rider leans it onto the stand. The weld at the joint is what keeps the stand from snapping under that load.

On affected Ducati motorcycles, a limited batch of stands came from the supplier with a tube cut outside the correct length. That out-of-spec length produced an improper weld at the joint. Over time, the weak weld can give way, and the stand can break while the bike is parked, letting the motorcycle fall over.

There is no warning sign before failure. The break happens at the weld without prior noise, play, or visible cracking that an owner is expected to catch.

Who's affected?

2018 Ducati Multistrada 1260 body or structural component
Units affected493
Field incidentsNHTSA has logged no field incidents to date.

Not every 2018 Ducati Multistrada 1260 is on the list. Check your VIN to confirm whether your specific motorcycle is included in this recall.

What's the safety risk?

A broken side stand can let the motorcycle fall over without warning, which raises the risk of injury to the rider, a bystander, or anyone nearby when the bike tips. Park on firm, level ground until the stand is replaced, and stay clear of the bike when it is resting on the stand. Repair is free at any franchised Ducati dealer.

What should I do?

  1. Check your VIN to confirm your 2018 Ducati Multistrada 1260 is included in this recall.
  2. Contact a franchised Ducati dealer to schedule the free side-stand replacement that fixes the improperly welded stand.
  3. Reference recall number 19V825 (Ducati recall SRV-RCL-19-004) when you call the dealer or customer service.
  4. Park on level ground and avoid relying on the side stand until the replacement is complete, since a broken stand can let the motorcycle fall over.
  5. Call Ducati customer service at 1-888-391-5446 with questions about the repair or your notification.

What happens at the repair

At the dealer, a Ducati technician removes the side stand and installs a new one with a correctly welded assembly. Parts and labor are free under the recall. If you have already paid out of pocket for a side stand repair tied to this defect, Ducati's standard reimbursement plan covers documented expenses. Bring your receipts and any related service paperwork to the service desk when you arrive, and the dealer can route the claim through Ducati customer service.

ReimbursementReimbursement available

Timeline

November 18, 2019 NHTSA published the recall
December 3, 2019 Dealer notification began
December 10, 2019 Dealer notification ended
December 27, 2019 Owner notification mailed
January 2, 2020 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
January 2, 2020 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 19V825?

Recall 19V825 covers 493 2018 Ducati Multistrada 1260, 1260S, and Pikes Peak motorcycles with an improperly welded side stand that can break. If the stand fails, the motorcycle can fall over, increasing the risk of injury. Ducati dealers will replace the side stand for free.

What should I do if my 2018 Ducati Multistrada 1260 is on this recall?

Check your VIN to confirm your specific motorcycle is included in recall 19V825. If it is, contact a franchised Ducati dealer to schedule the side stand replacement. Reference recall number 19V825 or Ducati's internal number SRV-RCL-19-004 when you call. The repair is free.

Is the recall repair free?

Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Ducati will replace the side stand free of charge at any franchised Ducati dealer. Parts and labor are covered regardless of where the motorcycle was originally purchased.

What is the safety risk?

If the side stand weld fails, the stand can break while the motorcycle is parked, and the motorcycle can unexpectedly fall over. The primary risk is injury to the rider or a bystander standing near the bike when the stand gives way. The defect does not affect the motorcycle while riding.

What if I bought my Ducati Multistrada 1260 used?

The free repair still applies. Federal recall law requires Ducati to honor the recall regardless of ownership history. If Ducati never mailed you a notice, check your VIN to confirm whether your specific motorcycle is included, then contact a franchised Ducati dealer and reference recall number 19V825.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/19V825000
Ducati customer service1-888-391-5446
NHTSA recall #19V825
NHTSA recall # (full)19V825000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 24, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →