Home/ Recalls/ Toyota/ 19V670
Campaign 19V670 Posted September 20, 2019 34 units

2018-2019 Toyota 4RUNNER Recall 19V670: Loose Fasteners

Recall 19V670 covers 34 2018-2019 Toyota 4RUNNER SUVs for loose steering and suspension fasteners. Repair is free at any franchised Toyota dealer.

Toyota is recalling 34 2018-2019 4RUNNER SUVs because steering and suspension components installed by Southeast Toyota Distributors were not properly tightened. Loose fasteners can cause loss of vehicle control or let an accessory detach into traffic, raising the risk of a crash or injury; Toyota dealers will inspect and tighten the components free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The steering and suspension fasteners on a 2018-2019 Toyota 4RUNNER hold key front-end parts in place. These parts keep the wheels pointed, support the vehicle's weight, and let the suspension move while the tires stay in steady contact with the road. During accessory installation, Toyota used torque wrenches to tighten those fasteners to a set force.

On affected 4RUNNER SUVs, some steering and suspension components were not confirmed as properly tightened after installation. The torque wrenches were supposed to save the tightening result by VIN and upload it through a wireless connection, but poor Wi-Fi at the Talleyrand facility kept some data from uploading. Without that confirmation, a fastener can be left loose, allowing a joint or related part to shift under driving loads.

There is no warning sign before failure. A loose joint can separate without giving the driver a clear symptom first, so the inspection matters even if the steering and ride feel normal.

Who's affected?

4RUNNER SUVs built from July 9, 2018, through August 14, 2019 are the included production window for both suspension and steering components.

2018 Toyota 4RUNNER suspension component
2018 Toyota 4RUNNER steering system
2019 Toyota 4RUNNER suspension component
2019 Toyota 4RUNNER steering system
Units affected34
Field incidentsNHTSA has logged 1 field incident to date.

A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific SUV is included.

What's the safety risk?

Loose steering or suspension fasteners can lead to loss of vehicle control. Loose accessory fasteners can also let a part detach and become a road hazard. Either problem increases the risk of a crash or injury. There is no warning sign before failure, so schedule the inspection and repair soon. Repair is free at any franchised Toyota dealer.

What should I do?

  1. Check your VIN to confirm your 2018-2019 Toyota 4RUNNER is included in this recall.
  2. Contact a franchised Toyota dealer to schedule the free inspection and re-tightening of steering and suspension fasteners that can loosen and affect vehicle control.
  3. Bring the recall notice if Toyota mailed one. If not, reference recall number 19V670 when you call.
  4. Drive cautiously until the repair is complete, leave extra following distance, and avoid carrying loose exterior accessories that show signs of movement.

What happens at the repair

At the dealer, a Toyota technician inspects the steering and suspension fasteners affected by this recall. The technician retightens any fasteners that were not properly tightened during installation. The recall repair is available now, and parts and labor are covered. If your VIN is included, schedule the repair with a Toyota dealer and ask the service desk to confirm that the steering and suspension fasteners were inspected before you pick up the vehicle.

Timeline

September 20, 2019 NHTSA published the recall
September 20, 2019 Dealer notification began
September 20, 2019 Dealer notification ended
October 28, 2019 Owner notification mailed
November 19, 2019 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
November 19, 2019 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 19V670?

Recall 19V670 covers 34 2018-2019 Toyota 4RUNNER vehicles with steering and suspension fasteners that were not properly tightened during installation. Loose fasteners can cause loss of vehicle control or let an accessory detach and become a road hazard.

What should I do if my 2018-2019 Toyota 4RUNNER is on this recall?

Check your VIN to confirm your specific 4RUNNER is included in recall 19V670. If it is, contact a franchised Toyota dealer to schedule the steering and suspension fastener inspection. Reference recall number 19V670 or SET19B when you call.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Toyota dealers will inspect the steering and suspension fasteners and re-tighten them as needed free of charge.

Is it safe to drive my Toyota 4RUNNER before the repair?

The recall does not include a do-not-drive order. The listed risk is that loose fasteners can cause loss of vehicle control, or an accessory can detach and become a road hazard. Confirm your VIN and schedule the free dealer inspection.

What if I bought my Toyota 4RUNNER used?

The free repair still applies. Recall coverage follows the VIN, not the first owner. Check your VIN to confirm whether your 2018-2019 Toyota 4RUNNER is included, then call a franchised Toyota dealer and reference recall 19V670 or SET19B.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/19V670000
Toyota customer service1-866-405-4226
NHTSA recall #19V670
NHTSA recall # (full)19V670000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 23, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →