Recall 19V664 affects 3,467 2020 Subaru Legacy and Outback vehicles for loose brake pedal bracket hardware. Repair is free at any franchised Subaru dealer.
Subaru is recalling 3,467 2020 Legacy and Outback vehicles because a brake pedal mounting bracket bolt is missing or insufficiently tightened. If the mounting area deforms over time, braking performance can drop and crash risk rises; Subaru dealers will complete the repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The brake pedal mounting bracket in the 2020 Subaru Legacy and Outback holds the brake pedal assembly in position under the dashboard. When you press the pedal, that bracket keeps the pedal aligned so the pedal force transfers cleanly into the brake system. The bracket depends on its mounting hardware being installed and tightened correctly.
On affected vehicles, a bolt in that bracket was missing or not tightened enough during assembly. Subaru traced the issue to a defective bolt feeder that improperly installed the hardware, including cross-threading the nut or leaving hardware out. With the bracket not secured as designed, the pedal assembly is not held with the same stiffness Subaru intended.
There is no warning sign before failure. Subaru did not identify a noise, warning light, or pedal feel change to watch for before the bracket hardware problem shows up.
Who's affected?
Legacy vehicles in scope were built from July 31, 2019 through August 26, 2019. Outback vehicles in scope were built from July 30, 2019 through August 29, 2019.
| 2020 Subaru Legacy | hydraulic brake system |
|---|---|
| 2020 Subaru Outback | hydraulic brake system |
| Units affected | 3,467 |
| Field incidents | NHTSA has logged no field incidents to date. |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether this recall applies to your specific vehicle.
What's the safety risk?
A missing or loose bolt can let the brake pedal mounting area deform over time. That reduces braking performance and increases the risk of a crash. There is no warning sign before the problem affects braking, so schedule the recall repair soon. Repair is free at any franchised Subaru dealer.
What should I do?
- Check your VIN to confirm your 2020 Subaru Legacy or Outback is included in this recall.
- Contact a franchised Subaru dealer to schedule the free brake-pedal mounting bracket inspection and hardware or pedal assembly repair that fixes the loose or missing bolt.
- Bring the recall notice if Subaru mailed one. Reference recall number 19V664 when you call.
- Drive cautiously until the repair is complete. Leave extra following distance and avoid hard braking when traffic allows.
What happens at the repair
At the dealer, a Subaru technician inspects the brake pedal mounting bracket hardware for missing or loose fasteners. The technician replaces the hardware or the brake pedal assembly when the inspection shows it is needed. Parts and labor are free under recall 19V664. If you have already paid out of pocket for a repair tied to this brake pedal bracket issue, ask Subaru customer service or the dealer service desk how to submit documentation under Subaru's general reimbursement plan.
| Reimbursement | Reimbursement available |
|---|
Timeline
| September 18, 2019 | NHTSA published the recall |
|---|---|
| September 18, 2019 | Dealer notification began |
| September 18, 2019 | Dealer notification ended |
| October 1, 2019 | Owner notification mailed |
| October 1, 2019 | VIN-searchable in NHTSA's database — Check your VIN to see whether this recall applies to your specific vehicle. |
| October 1, 2019 | Interim owner notification (was planned for this date) |
Frequently asked questions
What is recall 19V664?
Recall 19V664 covers 3,467 2020 Subaru Legacy and Outback vehicles with brake pedal mounting bracket hardware that was missing or not tightened enough. A loose bracket can deform over time, reduce braking performance, and increase crash risk.
What should I do if my 2020 Subaru Legacy or Outback is on this recall?
Check your VIN to confirm your specific vehicle is included in recall 19V664. If it is, contact a franchised Subaru dealer to schedule the brake pedal mounting bracket inspection. Subaru dealers will replace the affected hardware or brake pedal assembly as needed for free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to perform recall repairs at no cost. Subaru dealers will inspect the brake pedal mounting bracket hardware and replace the hardware or brake pedal assembly as needed, free of charge.
Is it safe to drive my 2020 Subaru Legacy or Outback before the repair?
Use caution until your VIN is checked and the dealer inspects the vehicle. Recall 19V664 involves brake pedal mounting hardware that can loosen or be missing, which can reduce braking performance and increase crash risk.
When did the Subaru recall 19V664 repair begin?
The recall repair began October 1, 2019. Subaru dealers inspect the brake pedal mounting bracket hardware and replace the hardware or brake pedal assembly as needed. Reference Subaru recall number WUL-97 when you call the dealer.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/19V664000 |
|---|---|
| Subaru customer service | 1-844-373-6614 |
| NHTSA recall # | 19V664 |
| NHTSA recall # (full) | 19V664000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 23, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →