RecallNotify
Sign up Check my VIN
Home/ Recalls/ Altec/ 19V465
Campaign 19V465 Posted June 17, 2019 328 units

2003-2019 Altec AD108/Hliw-T Recall 19V465: Brake Fittings

RN
Reviewed by the RecallNotify editorial team
Published May 25, 2026

Recall 19V465 affects 328 2003-2019 Altec Hliw-T and AD108 vehicles for leaking brake-line air fittings. Repair is free at any franchised Altec dealer.

Altec is recalling 328 2003-2019 Hliw-T and AD108 vehicles because non-DOT brake line fittings can leak at the air fittings. A leak can make the parking brake drag and increase crash risk, and Altec will replace the fittings free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The air brake line fittings on 2003-2019 Altec Hliw-T and AD108 vehicles connect the brake hoses, lines, and piping that carry compressed air through the brake system. In an air brake setup, those fittings have to seal tightly so pressure reaches the brake components instead of escaping at the connection points.

On affected units, Altec used non-DOT fittings in part of that brake air supply system. The wrong fittings were installed because production documentation did not properly specify the correct brake fitting type. Those fittings can crack and leak air at the fitting area, reducing air pressure in the brake system.

Owners or operators can notice a loss of air brake pressure before the fitting fully fails. They can also hear air escaping at the fittings, which is the warning sign to take seriously.

Who's affected?

The scope spans the Hliw-T and AD108 across the 2003-2019 model years, with the brake system named for each model year.

2013 Altec Hliw-T brake system
2015 Altec Hliw-T brake system
2016 Altec Hliw-T brake system
2018 Altec Hliw-T brake system
2004 Altec AD108 brake system
Units affected328
Field incidentsNHTSA has logged no field incidents to date.

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific vehicle is included.

What's the safety risk?

A brake-line leak can make the parking brake drag, which increases crash risk. Watch for loss of air brake pressure or the sound of air escaping at the fittings. If either sign appears, schedule service and avoid putting extra miles on the vehicle until it is inspected. Repair is free at any franchised Altec dealer.

What should I do?

  1. Check your VIN to confirm your 2003-2019 Altec Hliw-T or AD108 is included in this recall.
  2. Contact a franchised Altec dealer to schedule the free brake-line fitting inspection and replacement if the air fittings leak.
  3. Bring the recall notice if Altec mailed one, or reference recall number 19V465 when you call.
  4. Avoid unnecessary trips until the inspection, because a leaking brake line can make the parking brake drag.
  5. Call Altec customer service at 1-877-462-5832 with questions and reference Altec recall CSN 723.

What happens at the repair

At the dealer, an Altec technician inspects the brake line air fittings for leaks and checks whether the installed fittings meet the brake hose requirement tied to this recall. Any brake line air fittings that do not pass inspection are replaced free of charge. The service visit is focused on the air fitting leak issue described in campaign 19V465, so ask the service desk to confirm the affected fittings were inspected and replaced where needed.

Timeline

June 17, 2019 NHTSA published the recall
July 31, 2019 Owner notification mailed
August 13, 2019 Dealer notification began
August 13, 2019 Interim owner notification (was planned for this date)
August 15, 2019 Dealer notification ended

Frequently asked questions

What is recall 19V465?

Recall 19V465 covers 328 2003-2019 Altec Hliw-T and AD108 vehicles with non-DOT brake line fittings that can leak at the air fittings. If the brake lines leak, the parking brake can drag, increasing crash risk. Altec dealers will inspect and replace the fittings for free if needed.

What should I do if my 2003-2019 Altec Hliw-T or AD108 is on this recall?

Check your VIN to confirm your specific vehicle is included in recall 19V465. If it is, contact an Altec dealer or Altec customer service at 1-877-462-5832 to arrange the brake line fitting inspection. Reference recall number 19V465 or Altec CSN 723 when you call.

Is the recall repair free?

Yes. Federal recall law requires the recall remedy to be performed at no cost. Altec dealers will inspect the brake line air fittings and replace them if needed, free of charge.

What is the safety risk?

The risk is brake line leakage at the air fittings. If the lines leak, the parking brake can drag while the vehicle is in use, increasing crash risk. The repair path is direct: have an Altec dealer inspect the fittings and replace affected parts for free.

What if I bought my Altec Hliw-T or AD108 used?

The free recall repair still applies. Recall coverage follows the vehicle, not the first owner. Check your VIN to confirm whether your specific Altec vehicle is included, then contact an Altec dealer or Altec customer service with recall number 19V465.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/19V465000
Altec customer service1-877-462-5832
NHTSA recall #19V465
NHTSA recall # (full)19V465000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →