Home/ Recalls/ Autocar/ 19V456
Campaign 19V456 Posted June 14, 2019 275 units

2013-2018 Autocar Xpeditor Recall 19V456: Cross Member

Recall 19V456 affects 275 2013-2018 Autocar Xpeditor vehicles for a drive-shaft-support cross-member defect. Repair is free at any franchised Autocar dealer.

Autocar is recalling 275 2013-2018 Xpeditor vehicles under recall 19V456 because the drive shaft support cross member can fail. If that cross member fails, supported components can come loose from the vehicle and raise crash risk; Autocar dealers will complete the repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The frame cross member on 2013-2018 Autocar Xpeditor trucks is a steel support that ties the frame rails together near the drivetrain. It helps the frame hold its shape while the truck twists over uneven pavement and carries the drive shaft support in the right position. On these trucks, that support depends on the cross member and its brackets staying tight to the frame rails.

Affected trucks with a wheelbase less than or equal to 186 inches do not have enough torsional flexibility. That stiffness concentrates strain at the first cross member behind the engine, overstressing the mounting brackets until fatigue cracks form. If the brackets fail, the cross member can loosen and eventually disengage from the frame rails.

The warning signs are visible cracks in the cross member or its brackets during inspection. Owners or drivers can also hear an audible "popping" while the truck is moving.

Who's affected?

Covers one Xpeditor model line across the 2013-2018 model years, with each listed year tied to the same body or structural component.

2013 Autocar Xpeditor body or structural component
2016 Autocar Xpeditor body or structural component
2015 Autocar Xpeditor body or structural component
2014 Autocar Xpeditor body or structural component
2018 Autocar Xpeditor body or structural component
Units affected275
Field incidentsNHTSA has logged no field incidents to date.

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific truck is included.

What's the safety risk?

A failed cross member can let supported components come loose from the truck, increasing the risk of a crash. Cracks visible during inspection or a popping sound while the truck is moving are warning signs to stop the trip and arrange service. Schedule the repair soon. Repair is free at any franchised Autocar dealer.

What should I do?

  1. Check your VIN to confirm your 2013-2018 Autocar Xpeditor is included in this recall.
  2. Contact a franchised Autocar dealer to schedule the free support-bracket and cross-member repair that reinforces the drive shaft support cross member.
  3. Bring any Autocar recall notice you received, and reference recall number 19V456 when you call.
  4. Drive cautiously until the repair is complete because loose supported components increase crash risk.

What happens at the repair

At the dealer, an Autocar technician installs additional support brackets and cross members for the drive shaft support area, then replaces any damaged related components found during the repair. The recall repair is available now, and the parts and labor are free under campaign 19V456. The dealer should also confirm that the repaired support structure is secure before the vehicle returns to service.

Timeline

June 14, 2019 NHTSA published the recall
August 8, 2019 Dealer notification began
August 8, 2019 Interim owner notification (was planned for this date)
August 9, 2019 Dealer notification ended
October 13, 2020 Owner notification mailed

Frequently asked questions

What is recall 19V456?

Recall 19V456 covers 275 2013-2018 Autocar Xpeditor vehicles with a drive shaft support cross member that can fail. If that cross member fails, supported components can come loose from the vehicle and increase crash risk. Autocar dealers install additional support brackets and cross members for free.

What should I do if my 2013-2018 Autocar Xpeditor is on this recall?

Check your VIN to confirm your specific vehicle is included in recall 19V456. If it is, contact a franchised Autocar dealer to schedule the bracket and cross member repair. Reference recall 19V456 or Autocar recall ACX-1906 when you call. The repair is free.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Autocar dealers will install additional support brackets and cross members and replace damaged related components free of charge.

What is the safety risk?

The risk is that the drive shaft support cross member can fail. If it fails, the parts it supports can come loose from the vehicle, which increases crash risk. The dealer repair adds support brackets and cross members and replaces damaged components.

What if I bought my Autocar Xpeditor used?

The recall still follows the vehicle, not the first owner. Check your VIN to confirm whether your specific Xpeditor is included in recall 19V456, then call a franchised Autocar dealer or Autocar customer service at 1-888-218-3611 for scheduling help.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/19V456000
Autocar customer service1-888-218-3611
NHTSA recall #19V456
NHTSA recall # (full)19V456000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →