RecallNotify
Sign up Check my VIN
Home/ Recalls/ Altec/ 19V127
Campaign 19V127 Posted February 27, 2019 14,389 units

2003-2019 Altec Digger Derrick Recall 19V127: Weld Cracks

RN
Reviewed by the RecallNotify editorial team
Published May 25, 2026

Recall 19V127 affects 14,389 2003-2019 Altec Digger Derrick vehicles for pedestal tube weld cracks. Repair is free at any franchised Altec dealer.

Altec is recalling 14,389 2003-2019 Digger Derrick vehicles because pedestal tube welds can crack over time. Unrepaired cracks can lead to pedestal failure and uncontrolled movement, which increases the risk of injury; Altec dealers will complete the recall repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The pedestal on a 2003-2019 Altec Digger Derrick is the structural base that supports the derrick as it digs, lifts, and pulls. Welds at the pedestal tube and corner gussets, the reinforced corner braces, help carry those loads into the truck-mounted structure.

On affected units, cracks can form in those pedestal weld areas over time. Altec traced the concern to severe use or abuse, including work such as pulling stuck poles after cracks had already developed and gone unrepaired. The Hydraulic Overload Protection system is designed to warn the operator when the unit is being overloaded, but repeated overload events can still damage the structure if the manual's operating procedures are ignored.

Owners and operators can notice audible or visual HOP alerts during operation. The pedestal area is also open to daily and periodic inspection, so visible cracks around the pedestal corners are the key warning sign before a weldment breaks.

Who's affected?

The scope runs from the 2003 model year through the 2019 model year, with the same equipment component listed throughout.

2012 Altec Digger Derrick Equipment
2017 Altec Digger Derrick Equipment
2004 Altec Digger Derrick Equipment
2007 Altec Digger Derrick Equipment
2008 Altec Digger Derrick Equipment
Units affected14,389
Field incidentsNHTSA has logged no field incidents to date.

A matching model year and model does not guarantee inclusion. Check your VIN to confirm whether your specific vehicle is included.

What's the safety risk?

Cracks in the pedestal can lead to pedestal failure and uncontrolled movement, increasing the risk of injury. Treat any audible or visual Hydraulic Overload Protection alert, visible crack, or inspection concern as a reason to stop using the unit and arrange service. Repair is free at any franchised Altec dealer.

What should I do?

  1. Check your VIN to confirm your 2003-2019 Altec Digger Derrick is included in this recall.
  2. Contact Altec customer service at 1-877-462-5832 to schedule the free pedestal-tube weld inspection, needed repair, and reinforcing-kit installation.
  3. Bring the recall notice if Altec mailed one. If not, reference recall number 19V127 and Altec recall CSN 713 when you call.
  4. Avoid digger derrick operation until Altec inspects the pedestal tube welds and completes the repair.

What happens at the repair

At the dealer, an Altec technician inspects the pedestal tube weld area, completes any needed repair, and installs the reinforcing kit. The recall repair is free, with parts and labor covered. Altec has a general reimbursement plan on file for owners who already paid for related pedestal tube or weld repairs before the recall work. Keep repair orders and payment documentation, and contact Altec customer service to ask how to submit a claim under that plan.

ReimbursementReimbursement available

Timeline

February 27, 2019 NHTSA published the recall
April 3, 2019 Owner notification mailed
April 22, 2019 Dealer notification began
April 22, 2019 Interim owner notification (was planned for this date)
April 24, 2019 Dealer notification ended

Frequently asked questions

What is recall 19V127?

Recall 19V127 covers 14,389 2003-2019 Altec Digger Derrick vehicles with pedestal tube welds that can crack over time. Unrepaired cracks can lead to pedestal failure and uncontrolled movement, increasing injury risk. Altec provides repairs and a reinforcing kit.

What should I do if my 2003-2019 Altec Digger Derrick is on this recall?

Check your VIN to confirm your specific vehicle is included in recall 19V127. If it is, contact Altec customer service at 1-877-462-5832 and reference CSN 713. Altec provides the needed repair work and reinforcing kit.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Altec's remedy provides repairs and a reinforcing kit for included 2003-2019 Digger Derrick vehicles.

What is the safety risk?

The safety risk is pedestal failure and uncontrolled movement. The recall centers on pedestal tube welds that crack over time. If cracks are left unrepaired, the pedestal can fail during use, increasing the risk of injury.

What if I bought the Altec Digger Derrick used?

The recall still follows the vehicle. Check your VIN to confirm whether your specific Digger Derrick is included in recall 19V127, even if you never received an owner notice. If included, contact Altec customer service and reference CSN 713.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/19V127000
Altec customer service1-877-462-5832
NHTSA recall #19V127
NHTSA recall # (full)19V127000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →