Home/ Recalls/ Nissan/ 18V916
Campaign 18V916 Posted December 19, 2018 86,265 units

2009 Nissan Murano Recall 18V916: ABS HCU Valve Defect

Recall 18V916 affects 86,265 2009 Nissan Murano vehicles for ABS hydraulic control valves that can stick. Repair is free at any franchised Nissan dealer.

Nissan is recalling 86,265 2009 Murano SUVs because valves inside the ABS Hydraulic Control Unit can react with certain brake fluid additives and fail to close properly. When those valves stay open, the brake pedal travels farther before the vehicle stops, increasing crash risk; Nissan dealers will complete the recall repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The ABS actuator and hydraulic control unit on the 2009 Nissan Murano is the brake-control assembly that manages brake fluid pressure during anti-lock braking and traction-control events. Inside that unit, small valves open and close to route pressurized brake fluid so the system can reduce wheel lockup while keeping braking force under control.

On affected Muranos, a zinc coating on the normally closed valve armatures reacts with brake fluid additives used to prevent corrosion. That reaction forms a thick gel-like buildup inside the valve area. As the buildup hardens, the return spring has trouble pushing the valve fully closed. If the valve stays open, the brake system loses the normal closed position it relies on after an ABS event.

What you notice comes after ABS braking. The brake pedal travel becomes longer than it was before the valve stuck, so the pedal has to move farther before the brakes respond the same way.

Who's affected?

2009 Nissan Murano hydraulic brake system
Units affected86,265

A matching 2009 Nissan Murano does not guarantee inclusion. Check your VIN to confirm whether your specific SUV is included.

What's the safety risk?

A brake valve that stays open leaves the pedal traveling farther after an ABS braking event. That extra pedal travel means the Murano needs more pedal stroke to stop, increasing crash risk. If the pedal feels longer after ABS braking, drive cautiously and schedule the recall repair. Repair is free at any franchised Nissan dealer.

What should I do?

  1. Check your VIN to confirm your 2009 Nissan Murano is included in this recall.
  2. Contact a franchised Nissan dealer to schedule the free brake-system flush, DOT 4 fluid service, and HCU test that addresses valves that do not close properly.
  3. Bring the recall notice if Nissan sent one. If not, reference recall number 18V916 when you call.
  4. Ask the dealer whether the HCU needs replacement after testing; parts and labor are covered if replacement is needed.
  5. Drive cautiously until the repair is complete. Leave extra stopping distance if the brake pedal travels farther than normal.

What happens at the repair

At the dealer, a Nissan technician flushes the brake system with DOT 4 fluid, then tests the HCU for a stuck valve. If the test shows the valve condition, the technician replaces the HCU. Parts and labor are free under the recall. Nissan's owner notice includes reimbursement information for the cost of a brake repair completed before the recall notice. Keep repair paperwork and contact Nissan customer service at 1-800-867-7669 for the claim process.

ReimbursementReimbursement available

Timeline

December 19, 2018 NHTSA published the recall
December 20, 2018 Dealer notification began
December 20, 2018 Dealer notification ended
February 4, 2019 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
February 4, 2019 Interim owner notification (was planned for this date)
February 7, 2019 Owner notification mailed

Frequently asked questions

What is recall 18V916?

Recall 18V916 covers 86,265 2009 Nissan Murano vehicles with ABS Hydraulic Control Unit valves that can react with certain brake-fluid additives and fail to close properly. Extra brake pedal travel can be needed to stop the vehicle, increasing crash risk.

What should I do if my 2009 Nissan Murano is on this recall?

Check your VIN to confirm your specific Murano is included in recall 18V916. If it is, contact a franchised Nissan dealer to schedule the brake-system flush with DOT 4 fluid and HCU test. Reference recall number 18V916 when you call.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Nissan dealers will flush the brake system, test the HCU for a stuck valve condition, and replace the HCU if needed, free of charge.

What is the safety risk in recall 18V916?

The safety risk is longer brake pedal travel before the vehicle stops. If the ABS Hydraulic Control Unit valves do not close properly, the driver has to press farther to stop the Murano, increasing the risk of a crash.

What if I bought my 2009 Nissan Murano used?

The free recall repair still applies. Recall coverage follows the VIN, not the first owner. Check your VIN to confirm whether your Murano is included, then call a franchised Nissan dealer and reference recall number 18V916.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/18V916000
Nissan customer service1-800-867-7669
NHTSA recall #18V916
NHTSA recall # (full)18V916000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →