Recall 18V585 affects 37 2019 Trailstar Dump Trailer trailers for an improperly secured wheel-end nut clip. Repair is free at any franchised Trailstar dealer.
Trailstar is recalling 37 2019 Dump Trailer units because the locking device on the wheel end nut was installed incorrectly. If the wheel end nut loosens, the wheel can separate from the axle and increase the risk of a crash; Trailstar dealers will complete the recall repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The wheel end nut on a 2019 Trailstar Dump Trailer is the large fastener at the end of the axle that helps hold the wheel hub in place. Its locking device, a retaining clip in the Pro-Torq nut mechanism, keeps that nut from backing off as the trailer rolls, carries weight, and moves over rough surfaces.
On affected trailers, the supplier assembled the axle wheel ends with the locking mechanism installed incorrectly. If the retaining clip is not fully seated, the nut can loosen instead of staying locked. As the hub loses its secure fit on the axle, the wheel can wobble and separate from the axle.
Owners can notice a leaking wheel seal or excessive wheel wobble before separation. Those are warning signs that the wheel end is not staying properly secured. If either shows up, the trailer needs inspection before it is used again.
Who's affected?
| 2019 Trailstar Dump Trailer | wheel fastener (lug, nut, bolt, or stud) |
|---|---|
| Units affected | 37 |
| Field incidents | NHTSA has logged no field incidents to date. |
Not every 2019 Trailstar Dump Trailer is on the list. Check your VIN to confirm whether your specific trailer is included.
What's the safety risk?
Wheel separation from the axle increases the risk of a crash. Watch for a leaking wheel seal or excessive wheel wobble, and stop using the trailer if either appears. Schedule the inspection soon so the retaining clip on the Pro Torque nuts is checked and secured. Repair is free at any franchised Trailstar dealer.
What should I do?
- Check your VIN to confirm your 2019 Trailstar Dump Trailer is included in this recall.
- Contact a franchised Trailstar dealer to schedule the free wheel-end-nut retaining-clip inspection and repair.
- Bring the recall notice if Trailstar mailed one, or reference recall number 18V585 when you call.
- Avoid towing the trailer until the dealer completes the inspection if you cannot confirm the retaining clip is secured.
What happens at the repair
At the dealer, a Trailstar technician inspects the retaining clip on the Pro Torque wheel end nuts and secures the clip as needed so the locking device stays in place. The inspection and any needed securing work are free under recall 18V585. If you already paid for this same repair before the recall notice, ask Trailstar customer service how its reimbursement plan handles documented out of pocket expenses.
| Reimbursement | Reimbursement available |
|---|
Timeline
| September 4, 2018 | Dealer notification began |
|---|---|
| September 4, 2018 | Interim owner notification (was planned for this date) |
| September 5, 2018 | Dealer notification ended |
| September 8, 2018 | NHTSA published the recall |
| September 17, 2018 | Owner notification mailed |
Frequently asked questions
What is recall 18V585?
Recall 18V585 covers 37 2019 Trailstar Dump Trailer units with a wheel-end nut locking device that was improperly installed. If the wheel separates from the axle, crash risk increases. Trailstar dealers inspect the retaining clip on the Pro Torque nuts and secure it for free.
What should I do if my 2019 Trailstar Dump Trailer is on this recall?
Check your VIN to confirm your specific trailer is included in recall 18V585. If it is, contact a Trailstar dealer to schedule inspection of the Pro Torque nut retaining clip. Reference recall 18V585 when you call. The dealer repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Trailstar's remedy says dealers will inspect the retaining clip and secure it as necessary free of charge. Parts and labor are covered for included trailers.
What is the safety risk in recall 18V585?
The safety risk is wheel separation. Recall 18V585 states that an improperly installed wheel-end nut locking device can let the wheel separate from the axle, increasing crash risk. Confirm the VIN before using the trailer, then arrange the free dealer inspection and repair.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/18V585000 |
|---|---|
| Trailstar customer service | 1-330-821-9900 |
| NHTSA recall # | 18V585 |
| NHTSA recall # (full) | 18V585000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Recall Document (PDF) (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 24, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →