Recall 18V411 affects 18,105 2018-2019 Freightliner Cascadia trucks for loose brake caliper mounting bolts. Repair is free at any franchised Freightliner dealer.
Freightliner is recalling 18,105 2018-2019 Cascadia trucks because improperly tightened brake caliper mounting bolts can let a caliper detach. If that happens, braking performance is reduced and crash risk rises; Freightliner dealers will inspect and repair the caliper mounting bolts free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The air disc brake caliper on a 2018-2019 Freightliner Cascadia is the clamp that presses the brake pads against the brake rotor when the driver applies the brakes. The caliper is held to the wheel-end bracket by mounting bolts. Those bolts have to be tightened to the required torque so the caliper stays fixed while braking loads pass through it.
On affected Cascadias, some brake caliper mounting bolts were not torqued to the minimum specification at the Saltillo Truck Manufacturing Plant. A bolt that starts below the required torque can loosen further in service. If enough clamp force is lost, the caliper can shift or detach from its mounting point instead of staying aligned with the rotor.
There is no warning sign before failure. A driver should not count on noise, pedal feel, or a dashboard warning light before the caliper bolts lose their grip.
Who's affected?
The listed model years use the same brake system component.
| 2018 Freightliner Cascadia | brake system |
|---|---|
| 2019 Freightliner Cascadia | brake system |
| Units affected | 18,105 |
| Field incidents | NHTSA has logged no field incidents to date. |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific truck is included.
What's the safety risk?
If the brake calipers detach, braking performance is reduced and crash risk rises. Drive cautiously, avoid hauling heavy loads until inspected, and schedule the brake caliper bolt inspection as soon as possible. Repair is free at any franchised Freightliner dealer.
What should I do?
- Check your VIN to confirm your 2018-2019 Freightliner Cascadia is included in this recall.
- Contact a franchised Freightliner dealer to schedule the free brake-caliper bolt inspection and tightening that secures the caliper so it stays attached.
- Bring the recall notice if Freightliner mailed one. If not, reference recall number 18V411 when you call.
- Drive cautiously until the repair is complete. Leave extra following distance and avoid hard braking when traffic allows.
What happens at the repair
At the dealer, a Freightliner technician inspects the brake caliper mounting bolts and tightens any bolt that is not at the required torque. The work addresses bolts that were not properly tightened during assembly, which can let a brake caliper detach. Parts and labor are covered under the recall, so the inspection and any tightening needed are free for included 2018-2019 Cascadia vehicles.
Timeline
| June 15, 2018 | NHTSA published the recall |
|---|---|
| August 13, 2018 | Owner notification mailed |
| August 13, 2018 | Dealer notification began |
| August 13, 2018 | Dealer notification ended |
| August 13, 2018 | Interim owner notification (was planned for this date) |
Frequently asked questions
What is recall 18V411?
Recall 18V411 covers 18,105 2018-2019 Freightliner Cascadia vehicles with brake caliper mounting bolts that were not tightened properly. If a caliper detaches, braking performance is reduced and crash risk increases. Freightliner dealers will inspect and tighten the bolts as needed for free.
What should I do if my 2018-2019 Freightliner Cascadia is on this recall?
Check your VIN to confirm your specific truck is included in recall 18V411. If it is, contact a franchised Freightliner dealer to schedule the brake caliper bolt inspection. Reference recall 18V411 or Freightliner recall FL-775 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Freightliner dealers will inspect the brake caliper mounting bolts and tighten them as needed free of charge.
What is the safety risk?
The safety risk is reduced braking performance. If a brake caliper detaches from the truck, the brakes do not perform as intended, increasing the risk of a crash. Confirm the VIN, then have a Freightliner dealer complete the free inspection and repair.
What if I bought my Freightliner Cascadia used?
The free recall repair still applies. Recall coverage follows the VIN, not the first owner. Check your VIN to confirm whether your 2018-2019 Cascadia is included, then call a franchised Freightliner dealer and reference recall 18V411 or FL-775.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/18V411000 |
|---|---|
| Freightliner customer service | 1-800-547-0712 |
| NHTSA recall # | 18V411 |
| NHTSA recall # (full) | 18V411000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →