Home/ Recalls/ Nissan/ 18V240
Campaign 18V240 Posted April 16, 2018 483 units

2016-2018 Nissan Titan Recall 18V240: Capacity Label

Recall 18V240 affects 483 2016-2018 Nissan Titan trucks missing a load-carrying-capacity label. Ask a franchised Nissan dealer for the free label.

Nissan is recalling 483 2016-2018 Titan pickups because installed accessories reduced their load-carrying capacity and the required label was missing. Without that label, an owner can overload the truck, increasing crash risk, and Nissan dealers will install the correct load-carrying capacity label free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The load carrying capacity modification label tells an owner how much weight the truck can carry after accessories are added. It belongs near the truck's weight and tire information because added accessories change the payload the truck is built to handle safely. On these Nissan Titan trucks, the label is the part that gives the corrected limit.

On affected 2016-2018 Nissan Titan trucks, accessories reduced the available payload, but the label showing that lower capacity was not installed. The truck itself has the added equipment, so the original payload information no longer gives the full picture. Without the corrected label, an owner can load cargo, passengers, or equipment as if the higher capacity still applied, and the truck can be overloaded.

There is no warning sign before failure. The problem is missing information, not a part that makes noise or changes how the truck feels before it is loaded.

Who's affected?

Spans three Titan model years, all tied to the vehicle label used for placard or certification information.

2016 Nissan Titan vehicle label (placard or certification)
2017 Nissan Titan vehicle label (placard or certification)
2018 Nissan Titan vehicle label (placard or certification)
Units affected483

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific pickup truck is included.

What's the safety risk?

If the load label is wrong, the truck can be loaded past its safe capacity. Extra weight increases crash risk, so confirm the corrected label before carrying heavy cargo or towing. Repair is free at any franchised Nissan dealer.

What should I do?

  1. Check your VIN to confirm your 2016-2018 Nissan Titan is included in this recall.
  2. Contact your nearest franchised Nissan dealer to get the free load carrying capacity modification label and installation instructions.
  3. Bring the recall notice if Nissan mailed one. If not, reference recall number 18V240 when you call.
  4. Avoid loading the truck to the old posted capacity until the corrected Nissan label is installed.

What happens at the repair

At the dealer, a Nissan technician verifies the vehicle's load carrying capacity label and installs the new modification label using Nissan's instructions. The label and installation instructions are free under the recall. Because Nissan says the subject vehicles are under warranty, out-of-pocket repairs already paid are handled through existing warranty coverage, not through a separate reimbursement program. Ask the service desk how warranty coverage applies if you have prior repair paperwork.

ReimbursementWarranty coverage applies

Timeline

April 16, 2018 NHTSA published the recall
April 17, 2018 Dealer notification began
June 4, 2018 Owner notification mailed
June 16, 2018 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
June 16, 2018 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 18V240?

Recall 18V240 covers 483 2016-2018 Nissan Titan trucks with accessories that reduced load carrying capacity without the required modification label. Without the correct label, the truck can be overloaded, increasing crash risk. Nissan provides the new label and installation instructions for free.

What should I do if my 2016-2018 Nissan Titan is on this recall?

Check your VIN to confirm your specific truck is included in recall 18V240. If it is, contact Nissan customer service at 1-800-867-7669 or a franchised Nissan dealer and ask for the free load carrying capacity modification label and installation instructions.

Is the recall repair free?

Yes. Nissan provides the corrected modification label and installation instructions free of charge. Federal recall law requires the manufacturer to fix the recall defect at no cost, and Nissan began this recall remedy on June 4, 2018.

What is the safety risk?

The risk is vehicle overload. Accessories installed on the truck reduced its load carrying capacity, but the required label was missing. If the truck is loaded beyond its true capacity, handling and stopping performance can be affected, increasing crash risk.

What if I bought my Nissan Titan used?

The free recall remedy still applies. A used truck can be included even if the owner notice went to someone else. Check your VIN, then reference recall 18V240 when you contact Nissan customer service or a franchised Nissan dealer.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/18V240000
Nissan customer service1-800-867-7669
NHTSA recall #18V240
NHTSA recall # (full)18V240000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →