Recall 18V201 affects 132 2018 Pace Cargo Trailer trailers for spindle weld failure that can cause axle separation. Free axle replacement at franchised Pace dealers.
Pace is recalling 132 2018 Cargo Trailer vehicles because the axle spindle weld can fail and let the spindle separate from the pipe. If that happens, the trailer can lose control and raise the risk of a crash; Pace dealers will complete the recall repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The rear axle on the 2018 Pace Cargo Trailer is the metal assembly that carries the trailer's load and keeps the wheels aligned behind the tow vehicle. At each axle end, a spindle supports the wheel hub. The spindle weld is the joint that holds that spindle to the axle pipe.
On affected trailers, the spindle was not seated correctly inside the pipe before welding. That misalignment lets the weld sit too far onto the spindle or too far onto the pipe, instead of joining both parts where it should. Once the joint is stressed in normal use, the spindle and pipe can separate.
The warning sign listed for this recall is a loud pop when the weld fails and the parts separate. There is no earlier warning sign described before that failure.
Who's affected?
All listed trailers point to the same rear suspension component.
| 2018 Pace Cargo Trailer | rear suspension |
|---|---|
| 2018 Cargo Express Cargo Trailer | rear suspension |
| 2018 Look Cargo Trailer | rear suspension |
| Units affected | 132 |
| Field incidents | NHTSA has logged 3 field incidents to date. |
A matching 2018 Cargo Trailer model does not guarantee inclusion. Check your VIN to confirm whether your specific trailer is included.
What's the safety risk?
A failed spindle weld can separate the spindle from the pipe, which can lead to loss of vehicle control and increase crash risk. If you hear a loud pop from the axle area, stop the trailer and call the dealer before moving it again. Repair is free at any franchised Pace dealer.
What should I do?
- Check your VIN to confirm your 2018 Pace Cargo Trailer is included in this recall.
- Contact a franchised Pace dealer to schedule the free axle assembly replacement that addresses spindle weld separation.
- Bring the recall notice if you have it. If not, reference recall number 18V201 when you call.
- Drive cautiously until the repair is complete. Reduce speed and leave extra following distance because spindle weld failure can lead to loss of vehicle control.
What happens at the repair
At the dealer, a Pace technician replaces the affected axle assemblies on the cargo trailer. The repair addresses the axle spindle weld that can fail and let the spindle separate from the axle pipe. Parts and labor are covered under the recall, so the dealer performs the axle replacement free of charge. Have the service desk confirm the VIN before work begins.
Timeline
| March 28, 2018 | NHTSA published the recall |
|---|---|
| March 29, 2018 | Dealer notification began |
| April 4, 2018 | Interim owner notification (was planned for this date) |
| April 13, 2018 | Owner notification mailed |
| May 28, 2018 | Dealer notification ended |
Frequently asked questions
What is recall 18V201?
Recall 18V201 covers 132 2018 Pace Cargo Trailer units with an axle spindle weld that can fail and separate the spindle from the pipe. That failure can cause loss of vehicle control and increase crash risk. Dealers will replace the axle assemblies for free.
What should I do if my 2018 Pace Cargo Trailer is on this recall?
Check your VIN to confirm your specific trailer is included in recall 18V201. If it is, contact a franchised Pace dealer to schedule the axle assembly replacement. Reference recall number 18V201 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and the remedy for recall 18V201 is replacement of the axle assemblies free of charge. Pace owners can also call customer service at 1-877-475-5665.
What is the safety risk?
The safety risk is loss of vehicle control while towing. If the axle spindle weld fails and the spindle separates from the pipe, the trailer can become harder to control and crash risk increases. Check your VIN before towing again and ask the dealer about the safest way to move the trailer.
When did the recall repair become available?
The recall repair became available when owner notification began on April 13, 2018. Because the remedy is available, a franchised Pace dealer can replace the axle assemblies at no cost once your VIN is confirmed as included in recall 18V201.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/18V201000 |
|---|---|
| Pace customer service | 1-877-475-5665 |
| NHTSA recall # | 18V201 |
| NHTSA recall # (full) | 18V201000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →