Recall 17V578 affects 420 2017 Hyundai Santa Fe vehicles for crankshaft defects that cause engine bearing wear. Repair is free at any franchised Hyundai dealer.
Hyundai is recalling 420 2017 Santa Fe SUVs with 3.3L engines under recall 17V578 because crankshaft surface irregularities can wear the engine bearings. That bearing wear can stall the vehicle and increase crash risk, and Hyundai dealers will complete the recall repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The crankshaft assembly in the 2017 Hyundai Santa Fe 3.3L V6 is the main rotating part that turns piston movement into power at the wheels. The crankshaft pins are the smooth bearing surfaces where connecting rods ride as the engine spins. Those surfaces need the right hardness and finish so the bearings keep the rotating parts separated and lubricated.
On affected Santa Fe vehicles, the crankshaft assemblies received insufficient heat treatment because a heat treatment coil was positioned incorrectly during production. That left surface irregularities on the crankshaft pin. As the engine runs, those rough or weakened surfaces wear the engine bearings until the bearings seize. Once that happens, the engine can knock, lose power, hesitate, or stall.
Warning signs include abnormal engine noise, reduced motive power, hesitation, the "Check Engine" warning lamp, or the engine oil pressure warning lamp. Those signs point to bearing wear or oil-pressure trouble before engine failure.
Who's affected?
| 2017 Hyundai Santa Fe | Engine |
|---|---|
| Units affected | 420 |
| Field incidents | NHTSA has logged no field incidents to date. |
Not every 2017 Hyundai Santa Fe is on the list. Check your VIN to confirm whether your specific SUV is included.
What's the safety risk?
Engine bearing wear can cause the 2017 Santa Fe to stall and increase crash risk. Abnormal engine noise, reduced power, hesitation, a "Check Engine" lamp, or an oil pressure warning lamp are reasons to pull over when safe and call the dealer. Repair is free at any franchised Hyundai dealer.
What should I do?
- Check your VIN to confirm your 2017 Hyundai Santa Fe is included in this recall.
- Contact a franchised Hyundai dealer to schedule the free engine inspection and replacement, if needed, for crankshaft-bearing wear linked to stalling.
- Bring the recall notice if Hyundai mailed one. If not, reference recall number 17V578 when you call.
- Avoid long trips until the dealer inspects the engine. If the vehicle stalls or runs roughly, stop in a safe place and call the dealer.
What happens at the repair
At the dealer, a Hyundai technician inspects the 3.3L engine for the crankshaft and bearing wear condition covered by recall 17V578 and replaces the engine if needed. The inspection, replacement engine, and labor are free under the recall. Out-of-pocket repairs already paid are handled through Hyundai's new vehicle limited warranty, not through a separate reimbursement program, because the engine crankshaft is covered by that warranty. Ask the service desk how warranty coverage applies if you have prior repair paperwork.
| Reimbursement | Warranty coverage applies |
|---|
Timeline
| September 20, 2017 | NHTSA published the recall |
|---|---|
| September 27, 2017 | Dealer notification began |
| September 27, 2017 | Dealer notification ended |
| October 18, 2017 | VIN-searchable in NHTSA's database — Check your VIN to see whether this recall applies to your specific vehicle. |
| October 18, 2017 | Interim owner notification (was planned for this date) |
| November 6, 2017 | Owner notification mailed |
Frequently asked questions
What is recall 17V578?
Recall 17V578 covers 420 2017 Hyundai Santa Fe vehicles with 3.3L engines. The crankshaft pin surface was produced with irregularities that can cause engine bearing wear, leading to a stall and crash risk. Hyundai dealers will inspect and replace the engine as needed for free.
What should I do if my 2017 Hyundai Santa Fe is on this recall?
Check your VIN to confirm your specific Santa Fe is included in recall 17V578. If it is, contact a franchised Hyundai dealer to schedule the engine inspection. The dealer will replace the engine as needed at no cost. Reference recall number 17V578 when you call.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost. For recall 17V578, Hyundai dealers will inspect the engine and replace it as needed free of charge.
What is the safety risk?
The safety risk is engine stalling. Hyundai says crankshaft surface irregularities can cause engine bearing wear, and that wear can make the vehicle stall, increasing crash risk. If the engine stalls or runs abnormally, stop driving and contact a Hyundai dealer.
What if I bought my Hyundai Santa Fe used?
The free repair still applies. Recall coverage follows the vehicle, not the first owner. Check your VIN to confirm whether your specific 2017 Hyundai Santa Fe is included, then call a franchised Hyundai dealer and reference recall number 17V578.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/17V578000 |
|---|---|
| Hyundai customer service | 1-855-371-9460 |
| NHTSA recall # | 17V578 |
| NHTSA recall # (full) | 17V578000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →