Recall 17V112 affects 14,320 2015-2016 Yamaha YZF-R3 motorcycles for ignition-switch corrosion that can stall the engine. Repair is free at any franchised Yamaha dealer.
Yamaha is recalling 14,320 2015-2016 YZF-R3 motorcycles because water can enter the ignition switch, corrode it, and lead to an unexpected engine stall. A stall increases the risk of a crash, and Yamaha dealers will complete the repair free of charge once the remedy is available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The ignition switch on the 2015-2016 Yamaha YZF-R3 is the main electrical switch for the motorcycle. When you turn the key, it sends power to the systems needed to start and run the engine. The switch has to stay clean and dry for that electrical contact to work.
On affected motorcycles, water can get into the main switch and contaminate it. That contamination leads to corrosion inside the switch. Once corrosion builds up, the switch can lose proper electrical contact and shut the engine off while the motorcycle is being ridden. An engine stall in traffic or at speed can cause loss of control and a crash with injury or death.
The warning signs are tied to the switch losing power. At startup, the motorcycle can have no power when the main switch is turned on. While riding, the engine can stall without enough time for the rider to react.
Who's affected?
Both model years list the same ignition-switch component, so confirm inclusion by VIN before scheduling service.
| 2016 Yamaha YZF-R3 | electrical system |
|---|---|
| 2015 Yamaha YZF-R3 | electrical system |
| Units affected | 14,320 |
| Field incidents | NHTSA has logged no field incidents to date. |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific motorcycle is included.
What's the safety risk?
An engine stall increases the risk of a crash, especially if the ignition switch loses power while riding. If the main switch fails at startup or the engine stalls, stop in a safe place and arrange service soon. Repair will be free at any franchised Yamaha dealer once available.
What should I do?
- Check your VIN to confirm your 2015-2016 Yamaha YZF-R3 is included in this recall.
- Watch for Yamaha's repair notice before scheduling the ignition-switch replacement that addresses water intrusion and corrosion that can stall the engine.
- Call Yamaha customer service at 1-800-962-7926 with questions and reference recall number 17V112 when you call.
- Keep the motorcycle parked if it stalls or the ignition switch acts erratically, and contact a franchised Yamaha dealer before riding again.
What happens at the repair
Yamaha has identified the dealer repair for this recall: replacement of the ignition switch subassembly. Once the remedy is available, a Yamaha technician will remove the ignition switch subassembly that allows water intrusion and corrosion, then install the replacement assembly. Parts and labor are covered by the recall. Yamaha listed March 9, 2017 as the start date for owner notification, and Yamaha's recall number is 990112.
Timeline
| February 21, 2017 | NHTSA published the recall |
|---|---|
| March 3, 2017 | Owner notification mailed |
| March 9, 2017 | Dealer notification began |
| March 9, 2017 | Interim owner notification (was planned for this date) |
| March 13, 2017 | Dealer notification ended |
Frequently asked questions
What is recall 17V112?
Recall 17V112 covers 14,320 2015-2016 Yamaha YZF-R3 motorcycles with an ignition switch that can corrode after water enters it. The defect can cause an unexpected engine stall, increasing crash risk. Yamaha dealers replace the ignition switch subassembly for free.
What should I do if my 2015-2016 Yamaha YZF-R3 is on this recall?
Check your VIN to confirm your specific motorcycle is included in recall 17V112. If it is, contact a franchised Yamaha dealer to schedule the ignition switch subassembly replacement. Reference recall number 17V112 when you call. The dealer repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Yamaha's remedy states that dealers replace the ignition switch subassembly free of charge. Parts and labor are covered at any franchised Yamaha dealer handling the recall.
Is it safe to ride my Yamaha YZF-R3 before the repair?
The safety risk is an unexpected engine stall, which increases crash risk. Check your VIN before making riding plans. If your motorcycle stalls or shows ignition switch problems, stop riding, move out of traffic when safe, and call a Yamaha dealer for recall service guidance.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/17V112000 |
|---|---|
| Yamaha customer service | 1-800-962-7926 |
| NHTSA recall # | 17V112 |
| NHTSA recall # (full) | 17V112000 |
Source documents
-
Download Owner Notice (PDF) - Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →