Home/ Recalls/ Autocar/ 17V050
Campaign 17V050 Posted January 23, 2017 38 units

2013-2016 Autocar Xpeditor Recall 17V050: S-cam Tube Bolts

Recall 17V050 covers 38 2013-2016 Autocar Xpeditor vehicles for S-cam tube bolts that loosen and engage the brakes. Free repair at any franchised Autocar dealer.

Autocar is recalling 38 2013-2016 Xpeditor vehicles equipped with auxiliary axles and 36/36 rear brake chambers because over-braking can cause excessive vibration that loosens S-cam tube bolts and lets the brakes engage unexpectedly. Unexpected brake engagement can increase the risk of a crash, and Autocar dealers will complete the free repair.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The rear brake chambers on 2013-2016 Autocar Xpeditor trucks convert air pressure into mechanical force at the rear brakes. On trucks with auxiliary axles, the chamber size has to match the brake setup so the brakes apply with the right force. The S-cam tube is part of that brake assembly; it helps rotate the cam that spreads the brake shoes against the drum.

On affected trucks, the installed 36/36 rear brake chambers were too aggressive for this configuration. That incorrect chamber type caused over-braking, which created excessive vibration through the brake assembly. Over time, that vibration loosened the S-cam tube bolts. Once those bolts loosen, the rear brakes can engage unexpectedly instead of responding only to the driver's brake input.

There is no warning sign before failure. An owner or driver should not count on noise, pedal feel, or a dashboard alert to reveal that the S-cam tube bolts have loosened.

Who's affected?

Spans four Xpeditor model years, all tied to the brake system.

2013 Autocar Xpeditor brake system
2014 Autocar Xpeditor brake system
2015 Autocar Xpeditor brake system
2016 Autocar Xpeditor brake system
Units affected38
Field incidentsNHTSA has logged no field incidents to date.

A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific truck is included.

What's the safety risk?

Unexpected brake engagement can slow the truck without driver input and increase the risk of a crash. Until the rear brake chamber and S-cam bracket repair is complete, drive cautiously and schedule service soon. Repair is free at any franchised Autocar dealer.

What should I do?

  1. Check your VIN to confirm your 2013-2016 Autocar Xpeditor is included in this recall.
  2. Contact a franchised Autocar dealer to schedule the free rear brake chamber and S-cam bracket repair that addresses unexpected brake engagement.
  3. Bring the recall notice if Autocar mailed one. If not, reference recall number 17V050 when you call.
  4. Stop operating the vehicle and call the dealer if the brakes engage unexpectedly or excessive vibration starts before the repair.
  5. Call Autocar customer service at 1-765-489-5499 with questions about the repair.

What happens at the repair

At the dealer, an Autocar technician changes the rear brake chambers and the S-cam brackets covered by recall 17V050. The work addresses the brake hardware tied to excessive vibration and unexpected brake engagement on affected Xpeditor vehicles with auxiliary axles and 36/36 rear brake chambers. The replacement parts and labor are free under the recall, and the repair is available now through an Autocar dealer.

Timeline

January 23, 2017 NHTSA published the recall
March 17, 2017 Owner notification mailed
March 17, 2017 Dealer notification began
March 17, 2017 Dealer notification ended
March 17, 2017 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
March 17, 2017 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 17V050?

Recall 17V050 covers 38 2013-2016 Autocar Xpeditor vehicles equipped with auxiliary axles and 36/36 rear brake chambers. Over-braking can create excessive vibration, loosen the S-cam tube bolts, and allow the brakes to engage unexpectedly. Autocar dealers will change the rear brake chambers and S-cam brackets for free.

What should I do if my 2013-2016 Autocar Xpeditor is on this recall?

Check your VIN to confirm your specific Xpeditor is included in recall 17V050. If it is, contact a franchised Autocar dealer to schedule the rear brake chamber and S-cam bracket repair. Reference recall number 17V050 and Autocar recall number ACX-1701 when you call.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost. For recall 17V050, Autocar dealers will change the rear brake chambers and S-cam brackets free of charge.

What is the safety risk?

The safety risk is unexpected brake engagement. Autocar reported that over-braking can cause excessive vibration, which can loosen S-cam tube bolts and allow the brakes to engage unexpectedly. Brakes that engage without warning can increase the risk of a crash.

When did the recall repair become available?

The recall repair began on March 17, 2017. Autocar instructed dealers to change the rear brake chambers and S-cam brackets free of charge. Owners can contact Autocar customer service at 1-765-489-5499 for recall ACX-1701.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/17V050000
Autocar customer service1-765-489-5499
NHTSA recall #17V050
NHTSA recall # (full)17V050000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 25, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →