Home/ Recalls/ Yamaha/ 16V800
Campaign 16V800 Posted November 3, 2016 2,550 units

2014-2016 Yamaha WR250R Recall 16V800: Oil Seal Leak

Recall 16V800 affects 2,550 2014-2016 Yamaha WR250R motorcycles for a clutch oil-seal leak. Repair is free at any franchised Yamaha dealer.

Yamaha is recalling 2,550 2014-2016 WR250R motorcycles because an incorrectly assembled clutch push lever oil seal can crack and let engine oil leak out. Oil on the rear tire can cause loss of control and increase crash risk; the Yamaha dealer repair will be free once Yamaha makes it available.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The clutch push lever oil seal on 2014-2016 Yamaha WR250R motorcycles sits where the clutch push lever passes through the engine case. Its job is simple: keep engine oil inside the engine while the clutch linkage moves normally. That seal has to stay flexible and seated so oil pressure and vibration do not push oil out around the lever.

On affected WR250R motorcycles, Yamaha traced the problem to an incorrect assembly process, not a changed service-part design. The seal can crack after that assembly error. Once cracked, it no longer keeps engine oil contained. Escaping oil can run from the clutch push lever area, and if it reaches the rear tire, the rider can lose control.

The warning sign is oil seepage around the clutch push lever. Fresh oil in that area means the seal is no longer doing its job and the motorcycle needs dealer attention.

Who's affected?

Covers the WR250R across the 2014, 2015, and 2016 model years, all tied to the clutch assembly.

2014 Yamaha WR250R powertrain
2015 Yamaha WR250R powertrain
2016 Yamaha WR250R powertrain
Units affected2,550
Field incidentsNHTSA has logged no field incidents to date.

A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific motorcycle is included.

What's the safety risk?

Oil leaking from the engine can reach the rear tire, which can cause loss of control and increase crash risk. Oil seepage around the clutch push lever is the warning sign to take seriously. If you see oil near that area or on the rear tire, stop riding and contact a Yamaha dealer. Repair will be free at any franchised Yamaha dealer once available.

What should I do?

  1. Check your VIN to confirm your 2014-2016 Yamaha WR250R is included in this recall.
  2. Contact Yamaha customer service at 1-800-962-7926 to confirm the current repair timing before you ride to a dealer.
  3. Reference recall number 16V800 and Yamaha recall 990108 when you call.
  4. Watch for engine oil leaks near the clutch area or rear tire, and stop riding if you see oil.
  5. Arrange the clutch push lever oil seal replacement once Yamaha confirms service is open; the repair stops engine oil from leaking onto the rear tire.

What happens at the repair

Yamaha's filed repair calls for replacing the clutch push lever oil seal. Once the dealer repair is available, a Yamaha technician will remove the affected seal and install a replacement oil seal so engine oil stays contained at the clutch push lever area. Parts and labor will be free under the recall. The service desk can confirm whether the replacement part is available for your VIN before you bring in the motorcycle.

Timeline

November 3, 2016 NHTSA published the recall
November 11, 2016 Owner notification mailed
November 11, 2016 Dealer notification began
November 11, 2016 Interim owner notification (was planned for this date)
November 15, 2016 Dealer notification ended

Frequently asked questions

What is recall 16V800?

Recall 16V800 covers 2,550 2014-2016 Yamaha WR250R motorcycles with a clutch push lever oil seal that can crack after an incorrect assembly process. Engine oil can leak and reach the rear tire, increasing crash risk. Yamaha dealers replace the oil seal for free.

What should I do if my 2014-2016 Yamaha WR250R is on this recall?

Check your VIN to confirm your specific motorcycle is included in recall 16V800. If it is, contact a franchised Yamaha dealer to schedule the clutch push lever oil seal replacement. Reference recall number 16V800 and Yamaha recall number 990108 when you call.

Is the Yamaha WR250R recall repair free?

Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and Yamaha's remedy says dealers replace the clutch push lever oil seal free of charge. Parts and labor are covered at a franchised Yamaha dealer.

What is the safety risk in recall 16V800?

The safety risk is loss of control. If the clutch push lever oil seal cracks, engine oil can leak from the motorcycle and get on the rear tire. Yamaha links that condition to an increased crash risk in recall 16V800.

What if I bought my Yamaha WR250R used?

The free recall repair still applies. Recall coverage follows the motorcycle, not the first owner. Check your VIN to confirm whether your WR250R is included, then give the dealer recall number 16V800 and Yamaha recall number 990108 when scheduling service.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/16V800000
Yamaha customer service1-800-962-7926
NHTSA recall #16V800
NHTSA recall # (full)16V800000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →