Recall 16V752 affects 6,860 2016-2017 Polaris Slingshot motorcycles for leaking brake pressure switch seals. Repair is free at any franchised Polaris dealer.
Polaris is recalling 6,860 2016-2017 Slingshot motorcycles under recall 16V752 because an over tightened brake pressure switch can damage its seal and let brake fluid leak. Reduced brake performance increases crash risk, and Polaris dealers will complete the recall repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The 2016-2017 Polaris Slingshot uses a hydraulic brake system, which pushes brake fluid through lines when you press the pedal. The brake pressure switch sits in that system and reads brake pressure for the vehicle. A sealed banjo joint, a hollow brake-line fitting with a washer-style seal, has to hold that pressure without leaking or flexing.
On affected Slingshot motorcycles, the brake pressure switch and brake-line banjo joints were tightened with too much force during assembly. That extra torque can deform the steel portion of the Stat-O-Seal, the washer-style seal at the joint. Once that seal yields, the brake system has to build pressure again before the pedal feels normal.
After the vehicle sits unused for an extended period, you can notice longer brake pedal travel before brake pressure builds. The change shows up on the first brake pedal press after that period of no use.
Who's affected?
Both listed model years share the same hydraulic brake system component in this recall.
| 2016 Polaris Slingshot | hydraulic brake system |
|---|---|
| 2017 Polaris Slingshot | hydraulic brake system |
| Units affected | 6,860 |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific vehicle is included.
What's the safety risk?
Brake fluid loss reduces brake performance and increases the risk of a crash. After the vehicle sits unused for an extended period, longer brake pedal travel before pressure builds is the warning sign. If that happens, stop driving and call the dealer before using it again. Repair is free at any franchised Polaris dealer.
What should I do?
- Check your VIN to confirm your 2016-2017 Polaris Slingshot is included in this recall.
- Contact a franchised Polaris dealer to schedule the free brake pressure switch seal repair that stops brake fluid leaks from a damaged seal.
- Bring the recall notice if Polaris mailed one. If not, reference recall number 16V752 when you call.
- Drive cautiously until the repair is complete. Leave extra following distance and watch for brake fluid leaks or reduced braking.
What happens at the repair
At the dealer, a Polaris technician installs new brake pressure switch seals on the affected Slingshot. The recall repair is free, and parts and labor are covered. If you've already paid for this same repair before receiving the recall letter, Polaris directs owners to contact a Polaris dealer or the Slingshot Consumer Service Department for reimbursement information. Bring any repair paperwork that shows what was done and what you paid so the service desk can connect it to recall 16V752.
| Reimbursement | Reimbursement available |
|---|
Timeline
| October 18, 2016 | NHTSA published the recall |
|---|---|
| October 24, 2016 | Dealer notification began |
| October 25, 2016 | Interim owner notification (was planned for this date) |
| December 15, 2016 | Owner notification mailed |
Frequently asked questions
What is recall 16V752?
Recall 16V752 covers 6,860 2016-2017 Polaris Slingshot motorcycles with a brake pressure switch seal concern tied to over tightening. The damaged seal can allow brake fluid to leak, reduce brake performance, and increase crash risk. Polaris dealers install new brake pressure switch seals for free.
What should I do if my 2016-2017 Polaris Slingshot is on this recall?
Check your VIN to confirm your specific Slingshot is included in recall 16V752. If it is, contact a franchised Polaris dealer to schedule installation of new brake pressure switch seals. Reference recall 16V752 or Polaris recall T-16-02 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and Polaris dealers install the new brake pressure switch seals free of charge under recall 16V752. Use Polaris recall number T-16-02 when scheduling service.
What is the safety risk?
The safety risk is reduced brake performance from a brake fluid leak. In this recall, an over tightened brake pressure switch can damage the seal and allow fluid to leak. Reduced braking increases the risk of a crash, so confirm your VIN and schedule the free repair.
What if I bought my Polaris Slingshot used?
The free recall repair still applies. Federal recall law requires the manufacturer to honor the recall regardless of ownership history. If Polaris never mailed you a notice, check your VIN, then contact a franchised Polaris dealer and reference recall 16V752 or T-16-02.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/16V752000 |
|---|---|
| Polaris customer service | 1-855-863-2284 |
| NHTSA recall # | 16V752 |
| NHTSA recall # (full) | 16V752000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Recall Investigation Document (PDF) (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →