Home/ Recalls/ Audi/ 16V619
Campaign 16V619 Posted August 24, 2016 9,067 units

2010-2013 Audi A8 Recall 16V619: Coolant Valve Leak

Recall 16V619 affects 9,067 2010-2013 Audi A8 vehicles for coolant valve leaks that can stall the engine. Repair is free at any franchised Audi dealer.

Audi is recalling 9,067 2010-2013 A8 vehicles because a leaking coolant valve can send coolant into the engine control module. The damage can cause a loss of power or engine stall, increasing the risk of a crash, and Audi dealers will complete the recall repair free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The coolant valve on the 2010-2013 Audi A8 is an electrically controlled valve in the engine cooling system. It opens and closes coolant flow so the engine can manage temperature. The engine control module, the computer that controls engine operation, depends on clean electrical signals from parts like this valve.

On affected A8 vehicles, the plug at the solenoid valve does not seal as designed. Coolant can enter the sealed valve or coil chamber and cause a short circuit. Once that happens, coolant can reach the engine control module or interfere with its control of the engine. The result is loss of power or an engine stall.

The warning signs are a Malfunction Indicator light, also called a check engine light, and an engine cooling system warning light. If either light comes on, treat it as a sign that the coolant valve problem has reached a point the car can detect.

Who's affected?

Spans four model years of the A8, all tied to the engine component.

2010 Audi A8 Engine
2011 Audi A8 Engine
2012 Audi A8 Engine
2013 Audi A8 Engine
Units affected9,067
Field incidentsNHTSA has logged no field incidents to date.

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific sedan is included.

What's the safety risk?

A vehicle stall increases the risk of a crash. Watch for the Malfunction Indicator light and the engine cooling system warning light, and follow the owner's manual if either light appears. Schedule the recall repair soon so the coolant valve can be replaced and the connector inspected for coolant leakage. Repair is free at any franchised Audi dealer.

What should I do?

  1. Check your VIN to confirm your 2010-2013 Audi A8 is included in this recall.
  2. Contact a franchised Audi dealer to schedule the free coolant-valve replacement and connector inspection that stops coolant from reaching the engine control module and stalling the engine.
  3. Bring the recall notice if Audi sent one. If not, reference recall number 16V619 when you call.
  4. Drive cautiously until the repair is complete. Pull over safely if the engine loses power or stalls.

What happens at the repair

At the dealer, an Audi technician replaces the coolant valve and checks the electrical connector for coolant that leaked into it. The technician also looks for signs that coolant reached the engine control module, since that is the path tied to loss of power or stalling in campaign 16V619. Parts and labor are covered under the recall. Audi's general reimbursement plan is on file for owners who already paid for a related coolant valve repair. Ask Audi customer service or the dealer service desk what documentation they need before submitting a claim.

ReimbursementReimbursement available

Timeline

August 24, 2016 NHTSA published the recall
October 18, 2016 Owner notification mailed
October 19, 2016 Dealer notification began
October 19, 2016 Dealer notification ended
October 19, 2016 Interim owner notification (was planned for this date)

Frequently asked questions

What is recall 16V619?

Recall 16V619 covers 9,067 2010-2013 Audi A8 vehicles with a coolant valve that can leak into the engine control module. That can cause loss of power or an engine stall, which increases crash risk. Audi dealers replace the coolant valve and inspect the electrical connector for free.

What should I do if my 2010-2013 Audi A8 is on this recall?

Check your VIN to confirm your specific A8 is included in recall 16V619. If it is, contact a franchised Audi dealer to schedule the coolant valve replacement and connector inspection. Reference recall number 16V619 when you call. The repair is free.

Is the Audi A8 recall repair free?

Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Audi's remedy says dealers will replace the coolant valve and inspect for coolant through the electrical connector free of charge at a franchised Audi dealer.

What is the safety risk in recall 16V619?

The safety risk is engine power loss or a stall while driving. Audi reported that coolant can enter the engine control module through the leaking valve path. A vehicle stall increases crash risk, so confirm your VIN and arrange the free dealer repair if your A8 is included.

What if I bought my Audi A8 used?

The free recall repair still applies. Federal recall law requires manufacturers to honor safety recalls regardless of ownership history. If you never received an Audi letter, check your VIN to confirm whether your specific A8 is included, then call an Audi dealer with recall number 16V619.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/16V619000
Audi customer service1-800-253-2834
NHTSA recall #16V619
NHTSA recall # (full)16V619000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →