Home/ Recalls/ E-One/ 16V293
Campaign 16V293 Posted May 12, 2016 140 units

2015-2016 E-One Cyclone Ii/Quest Ii/Typhoon Recall 16V293

Recall 16V293 covers 140 2015-2016 E-One Cyclone Ii, Quest Ii, and Typhoon vehicles for faulty pump strainers. Free repair at a franchised E-One dealer.

E-One is recalling 140 2015-2016 Cyclone Ii, Quest Ii, and Typhoon emergency vehicles because 6-inch intake strainers on the firefighting water pumps can come apart during use. If strainer pieces or debris enter the pump, the operator has to shut it down, which reduces firefighting effectiveness and increases injury risk; E-One will repair the pump intake strainers free of charge.

Does this recall apply to your specific vehicle?

The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.

Check my VIN at NHTSA

RecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.

What's wrong?

The intake strainer is a screened fitting on the fire pump intake on 2015-2016 E-One Cyclone Ii, Quest Ii, and Typhoon emergency vehicles. It sits in the water path before the pump and is meant to keep larger debris out while the pump draws water and builds pressure for firefighting.

On affected vehicles, the 6-inch intake strainer was not soldered correctly during production. The joints did not always receive solder around the full perimeter, so the strainer can separate during pump operation. When that happens, pieces of the strainer and debris can enter the pump and damage it, reducing the pump's ability to deliver pressurized water.

Crews can hear chatter at the pipe intake or clanging and banging during use. During inspection, they can find loose or damaged strainer pieces, along with broken solder from the joint.

Who's affected?

Spans Cyclone Ii, Quest Ii, and Typhoon trucks across the 2015 and 2016 model years, all tied to the same equipment component.

2015 E-One Cyclone Ii Equipment
2016 E-One Cyclone Ii Equipment
2015 E-One Quest Ii Equipment
2016 E-One Quest Ii Equipment
2015 E-One Typhoon Equipment
Units affected140
Field incidentsNHTSA has logged no field incidents to date.

The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific truck is included.

What's the safety risk?

Loose strainer parts or debris can enter the pump and force the operator to shut it down. That reduces firefighting effectiveness and increases the risk of injury. Chatter at the pipe intake, clanging or banging, loose strainer parts, or broken solder are warning signs to inspect before service. Repair is free at any franchised E-One dealer.

What should I do?

  1. Check your VIN to confirm your 2015-2016 E-One Cyclone Ii, Quest Ii, or Typhoon is included in this recall.
  2. Contact a franchised E-One dealer to schedule the free intake-strainer inspection and replacement if solder is missing.
  3. Mention recall number 16V293 when you call so the dealer can match the repair to the correct campaign.
  4. Bring the recall notice if E-One mailed one, and ask whether the Hale pump strainer must be replaced.
  5. Limit fire-pump use until the inspection is complete; a loose strainer or debris can enter the pump and reduce firefighting effectiveness.

What happens at the repair

At the dealer, an E-One technician checks the pump intake strainer for missing solder at the joints. Any strainer with missing solder is replaced free of charge under the recall, so parts and labor are covered. If you already paid for a related strainer repair before the recall work, E-One has a general reimbursement plan on file. Ask E-One customer service how to submit documentation under that plan.

ReimbursementReimbursement available

Timeline

May 12, 2016 NHTSA published the recall
May 31, 2016 Dealer notification began
May 31, 2016 VIN-searchable in NHTSA's database Check your VIN to see whether this recall applies to your specific vehicle.
May 31, 2016 Interim owner notification (was planned for this date)
June 6, 2016 Owner notification mailed
June 10, 2016 Dealer notification ended

Frequently asked questions

What is recall 16V293?

Recall 16V293 covers 140 2015-2016 E-One Cyclone Ii, Quest Ii, and Typhoon emergency vehicles with intake strainers on fire pumps that were improperly soldered. During pump use, the strainer can come apart, send debris into the pump, reduce firefighting effectiveness, and increase injury risk.

What should I do if my 2015-2016 E-One Cyclone Ii, Quest Ii, or Typhoon is on this recall?

Check your VIN to confirm your specific emergency vehicle is included in recall 16V293. If it is, inspect the intake strainer for missing solder at the joints, then contact E-One service to arrange replacement of any affected strainer. Reference recall number 16V293 when you call.

Is the recall repair free?

Yes. Federal recall law requires the manufacturer to correct the defect at no cost, and E-One will replace any strainer missing solder free of charge. Owners can contact E-One customer service at 1-352-861-3612 for repair direction.

What is the safety risk?

The risk is reduced firefighting effectiveness during pump operation. If the strainer comes apart and debris enters the pump, the operator can be forced to shut down the pump, increasing the risk of injury during a fire response.

When did the recall repair start?

The recall repair began on June 6, 2016. E-One told owners to check the strainer for missing solder at the joints, and any strainer missing solder is replaced free of charge.

More information

NHTSA campaign pagenhtsa.gov/vehicle-recalls/16V293000
E-One customer service1-352-861-3612
NHTSA recall #16V293
NHTSA recall # (full)16V293000

Source documents

This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →