Recall 16V254 affects 15 2013-2016 Custom Truck Dominator trucks for valve bank covers that can detach. Repair is free at a franchised Custom Truck dealer.
Custom Truck is recalling 15 2013-2016 Dominator I, Dominator-Propane, Dominator Iv, Dominator Iii, and Dominator Ii trucks equipped with IMT cranes because the crane valve bank cover can crack and fall off during transport. A detached cover can become a road hazard and increase crash risk, and Custom Truck dealers will complete the repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The valve bank cover on these 2013-2016 Custom Truck Dominator trucks is a protective steel cover for the crane's hydraulic valve bank. That valve bank directs hydraulic fluid to the crane functions, so the cover is there to shield those controls while the truck is working or being transported.
On affected trucks with certain IMT cranes, the newer cover was made larger to fit more than one valve bank setup. The larger cover can vibrate too much under certain road conditions. That repeated vibration creates fatigue cracks in the metal, and the cracked cover can break away from the crane while the truck is moving.
Owners or fleet technicians should inspect the valve bank cover for cracks forming around the cover. Visible cracking is the warning sign before the cover detaches, and a cracked cover should be removed or replaced.
Who's affected?
Covers five Dominator configurations across the 2013-2016 model years, all tied to the same equipment category.
| 2014 Custom Truck Dominator I | Equipment |
|---|---|
| 2014 Custom Truck Dominator-Propane | Equipment |
| 2013 Custom Truck Dominator I | Equipment |
| 2015 Custom Truck Dominator-Propane | Equipment |
| 2013 Custom Truck Dominator Iv | Equipment |
| 2014 Custom Truck Dominator Iv | Equipment |
| 2016 Custom Truck Dominator I | Equipment |
| 2015 Custom Truck Dominator Iv | Equipment |
| 2014 Custom Truck Dominator Iii | Equipment |
| 2015 Custom Truck Dominator Iii | Equipment |
| 2013 Custom Truck Dominator Ii | Equipment |
| 2014 Custom Truck Dominator Ii | Equipment |
| 2015 Custom Truck Dominator Ii | Equipment |
| 2016 Custom Truck Dominator Iv | Equipment |
| 2015 Custom Truck Dominator I | Equipment |
| 2016 Custom Truck Dominator Ii | Equipment |
| 2016 Custom Truck Dominator Iii | Equipment |
| 2013 Custom Truck Dominator-Propane | Equipment |
| 2016 Custom Truck Dominator-Propane | Equipment |
| 2013 Custom Truck Dominator Iii | Equipment |
| Units affected | 15 |
| Field incidents | NHTSA has logged no field incidents to date. |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether this recall applies to your specific truck.
What's the safety risk?
A detached valve bank cover can fall from the crane and become a road hazard, increasing the risk of a crash. Inspect the cover periodically for cracks. If cracks are forming, stop using the crane until the cover is removed or replaced. Repair is free at any franchised Custom Truck dealer.
What should I do?
- Check your VIN to confirm your 2013-2016 Custom Truck Dominator I, Dominator-Propane, Dominator Iv, Dominator Iii, or Dominator Ii is included in this recall.
- Contact a franchised Custom Truck dealer to schedule the free thicker-gauge valve bank cover replacement that secures the crane cover during transport.
- Bring the recall notice if Custom Truck mailed one. If not, reference recall number 16V254 and Custom Truck recall TB2016001 when you call.
- Inspect the crane valve bank cover before moving the truck, and stop if the cover is cracked, loose, or missing.
What happens at the repair
At the dealer, a Custom Truck technician replaces the crane valve bank cover with a thicker gauge cover. The replacement parts and labor are free under the recall. Owners who already paid out of pocket for the same valve bank cover repair can file a warranty claim with IMT for reimbursement of parts and labor. Bring repair paperwork to the service desk so the claim can be matched to the covered repair.
| Reimbursement | Reimbursement available |
|---|
Timeline
| April 27, 2016 | Interim owner notification (was planned for this date) |
|---|---|
| April 28, 2016 | NHTSA published the recall |
| May 28, 2016 | Owner notification mailed |
Frequently asked questions
What is recall 16V254?
Recall 16V254 covers 15 2013-2016 Custom Truck Dominator I, Dominator-Propane, Dominator Iv, Dominator Iii, and Dominator Ii trucks with IMT cranes. The crane valve bank cover can crack and fall from the crane during transport, creating a road hazard. Dealers will replace the cover for free.
What should I do if my 2013-2016 Custom Truck Dominator I, Dominator-Propane, Dominator Iv, Dominator Iii, or Dominator Ii is on this recall?
Check your VIN to confirm your specific truck is included in recall 16V254. If it is, contact a franchised Custom Truck dealer or Custom Truck customer service at 1-888-712-2962 to schedule the valve bank cover replacement. Reference recall number 16V254 when you call.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and Custom Truck dealers will replace the crane valve bank cover with a thicker gauge cover free of charge.
What is the safety risk in recall 16V254?
The safety risk is road debris from the crane. If the valve bank cover detaches while the truck is being transported, it can become a road hazard and increase crash risk for nearby traffic. The fix is a free replacement cover with thicker gauge material.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/16V254000 |
|---|---|
| Custom Truck customer service | 1-888-712-2962 |
| NHTSA recall # | 16V254 |
| NHTSA recall # (full) | 16V254000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →