Recall 16V157 affects 392 2012-2015 Rosenbauer Commander vehicles for brake pedal piston corrosion. Repair is free at any franchised Rosenbauer dealer.
Rosenbauer is recalling 392 2012-2015 Commander vehicles because corrosion in the brake pedal piston can make the pedal stick or hard to press. The brakes can also drag and overheat, increasing crash risk, and Rosenbauer dealers will complete the repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The brake pedal piston on 2012-2015 Rosenbauer Commander trucks is part of the pedal linkage that turns foot pressure into braking action. It passes through the brake pedal base plate, and it needs to move freely each time the driver presses or releases the pedal.
On affected trucks, corrosion builds where that piston passes through the base plate. Moisture, floor debris, and road chemicals used for ice control can stay around the pedal area when the floor is not cleaned. That corrosion adds friction around the piston, which makes the brake pedal stick or makes it harder to press.
Owners can notice the pedal sticking, binding, or needing more effort than normal. Other warning signs are visible corrosion near the brake pedal or discoloration of the floor mat around the pedal area.
Who's affected?
Spans Commander trucks from 2012-2015, all tied to the same hydraulic brake system.
| 2012 Rosenbauer Commander | hydraulic brake system |
|---|---|
| 2014 Rosenbauer Commander | hydraulic brake system |
| 2015 Rosenbauer Commander | hydraulic brake system |
| 2013 Rosenbauer Commander | hydraulic brake system |
| Units affected | 392 |
| Field incidents | NHTSA has logged 10 field incidents to date. |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific truck is included.
What's the safety risk?
Corrosion in the brake piston makes the brakes harder to activate or causes brake drag and overheating, increasing crash risk. Treat a sticky brake pedal, visible corrosion, or floor mat discoloration near the pedal as a reason to stop using the vehicle and call the dealer. Repair is free at any franchised Rosenbauer dealer.
What should I do?
- Check your VIN to confirm your 2012-2015 Rosenbauer Commander is included in this recall.
- Contact a franchised Rosenbauer dealer to schedule the free spacer-plate, pedal-base, piston, and seal repair that protects the brake pedal piston from corrosion.
- Bring the recall notice if Rosenbauer mailed one. If not, reference recall number 16V157 when you call.
- Drive cautiously until the repair is complete; leave extra stopping distance and call Rosenbauer customer service at 1-651-462-1000 if the brake pedal sticks, feels hard to press, or the brakes drag.
What happens at the repair
At the dealer, a Rosenbauer technician installs a solid spacer plate, pedal base, piston, and piston seal, then seals the assembly so contamination cannot reach the brake pedal piston. The recall repair is available, and parts and labor are covered. The work addresses the corroded brake pedal piston that can make the brake pedal stick or become hard to press.
Timeline
| March 17, 2016 | NHTSA published the recall |
|---|---|
| March 28, 2016 | Dealer notification began |
| April 4, 2016 | Interim owner notification (was planned for this date) |
| April 11, 2016 | Dealer notification ended |
| May 1, 2016 | Owner notification mailed |
Frequently asked questions
What is recall 16V157?
Recall 16V157 covers 392 2012-2015 Rosenbauer Commander vehicles with a brake pedal piston that can corrode. Corrosion can make the brake pedal stick, make braking difficult, or cause brake drag and overheating. This increases crash risk. Rosenbauer dealers repair the pedal assembly for free.
What should I do if my 2012-2015 Rosenbauer Commander is on this recall?
Check your VIN to confirm your specific vehicle is included in recall 16V157. If it is, contact a Rosenbauer dealer to schedule the brake pedal repair. Reference recall number 16V157 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Rosenbauer dealers will install the spacer plate, pedal base, piston, and piston seal free of charge. Rosenbauer customer service is available at 1-651-462-1000.
What is the safety risk?
The safety risk is reduced or impaired braking. A corroded brake pedal piston can make the brakes difficult to activate, or it can cause the brakes to drag and overheat. Either condition increases crash risk, so confirm your VIN and arrange the free dealer repair.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/16V157000 |
|---|---|
| Rosenbauer customer service | 1-651-462-1000 |
| NHTSA recall # | 16V157 |
| NHTSA recall # (full) | 16V157000 |
Source documents
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →