Recall 16V054 affects 2,988 2015 GMC Canyon and Colorado trucks for a steering gear connector defect. Repair is free at any franchised GMC dealer.
GMC is recalling 2,988 2015 Canyon and Colorado pickups under recall 16V054 because a poor electrical connection in the steering gear connector can cut or reduce power steering assist. The loss of assist can make steering harder and increase crash risk; GMC dealers will complete the repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The electric power steering system on the 2015 GMC Canyon and Colorado uses a steering gear, torque sensor, and wiring connector to read how much force you apply at the wheel. The sensor sends that signal through the connector so the steering motor adds assist. With assist working, low-speed turns and parking maneuvers take much less effort.
On these vehicles, the torque-sensor harness connector was damaged during functional testing at the supplier. A stuck pin on the test device permanently bent the connector's contact springs. That poor contact can interrupt the signal inside the steering gear connector, causing the truck to lose power steering assist and switch to manual steering for the rest of that key cycle.
If the connection is lost, the steering wheel becomes harder to turn, especially at lower speeds. A malfunction indicator light displays on the instrument panel, and a chime sounds to warn the driver.
Who's affected?
Covers Canyon and Colorado pickup trucks from the same model year, both tied to the power steering system.
| 2015 GMC Canyon | power steering system |
|---|---|
| 2015 Chevrolet Colorado | power steering system |
| Units affected | 2,988 |
| Field incidents | NHTSA has logged no field incidents to date. |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific pickup truck is included.
What's the safety risk?
If power steering assist is lost or reduced, steering effort increases and crash risk rises. The warning signs are a steering malfunction light, a chime, and manual-steer feel. If those appear, slow down safely, avoid unnecessary driving, and schedule the recall repair. Repair is free at any franchised GMC dealer.
What should I do?
- Check your VIN to confirm your 2015 GMC Canyon or Colorado is included in this recall.
- Contact a franchised GMC dealer to schedule the free steering gear torque sensor cover assembly replacement that fixes the poor connection linked to loss of power steering assist.
- Bring the recall notice if GMC mailed one. If not, reference recall number 16V054 when you call.
- Drive cautiously until the repair is complete. Pull over safely if the steering becomes hard to turn.
What happens at the repair
At the dealer, a GMC technician replaces the steering gear torque sensor cover assembly. The parts and labor are free under the recall, which began March 1, 2016. This repair addresses the poor electrical connection in the steering gear connector that can lead to loss of power steering assist. If you already paid for a related steering repair before the recall work, bring your receipts or repair paperwork to the service desk and ask about reimbursement under the plan submitted on May 20, 2015.
| Reimbursement | Reimbursement available |
|---|
Timeline
| January 27, 2016 | Dealer notification began |
|---|---|
| January 27, 2016 | Dealer notification ended |
| February 1, 2016 | NHTSA published the recall |
| March 1, 2016 | Owner notification mailed |
Frequently asked questions
What is recall 16V054?
Recall 16V054 covers 2,988 2015 GMC Canyon and Chevrolet Colorado trucks with a poor electrical connection in the steering gear connector. The defect can cause loss or reduction of power steering assist, increasing crash risk. Dealers will replace the steering gear torque sensor cover assembly for free.
What should I do if my 2015 GMC Canyon or Chevrolet Colorado is on this recall?
Check your VIN to confirm your specific truck is included in recall 16V054. If it is, contact a franchised GMC or Chevrolet dealer to schedule the steering gear torque sensor cover assembly replacement. Reference recall number 16V054 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and the remedy says dealers will replace the steering gear torque sensor cover assembly free of charge. The recall repair has been available since March 1, 2016.
What is the safety risk?
The safety risk is loss or reduction of power steering assist. If power assist drops out, the truck becomes harder to steer, especially at low speeds or during tight maneuvers, and that increases crash risk. The fix is the free steering gear torque sensor cover assembly replacement.
What if I bought this truck used?
The free repair still applies. Recall coverage follows the VIN, not the first owner, so a used 2015 GMC Canyon or Chevrolet Colorado remains eligible if it is included in recall 16V054. Check your VIN, then call a franchised dealer with the campaign number.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/16V054000 |
|---|---|
| GMC customer service | 1-800-222-1020 |
| NHTSA recall # | 16V054 |
| NHTSA recall # (full) | 16V054000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →