Recall 15V468 affects 199 2015 Ram 4500 and 5500 trucks for weak front upper control arm welds. Repair is free at any franchised Ram dealer.
Ram is recalling 199 2015 4500 and 5500 trucks because the front upper control arm loop-to-spacer weld lacks enough penetration, reducing front suspension stability. That loss of stability can affect vehicle control and increase crash risk; Ram dealers will complete the free repair.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The front upper control arm on the 2015 Ram 5500 and 4500 is a suspension link at the front axle area. It helps hold the wheel and suspension in the correct position as the truck turns, brakes, and carries load. The arm depends on a secure weld between its loop and spacer so the suspension geometry stays stable.
On affected trucks, that front upper control arm loop to spacer weld did not get enough weld penetration. In plain terms, the weld did not fuse deeply enough into the metal it joins. That weak joint reduces front suspension stability because the control arm cannot be counted on to hold its position with the same strength intended by the design.
There is no warning sign before failure. The recall information does not list a sound, warning light, steering change, or other symptom that owners can rely on before the weld problem affects the front suspension.
Who's affected?
Covers the Ram 4500 and 5500 truck classes with the same upper control arm component.
| 2015 Ram 5500 | upper control arm |
|---|---|
| 2015 Ram 4500 | upper control arm |
| Units affected | 199 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether this recall applies to your specific truck.
What's the safety risk?
If an upper control arm is affected, reduced suspension stability control can affect vehicle control and increase the risk of a crash. Drive cautiously and schedule the dealer inspection soon. Repair is free at any franchised Ram dealer.
What should I do?
- Check your VIN to confirm your 2015 Ram 5500 or 4500 is included in this recall.
- Contact your nearest franchised Ram dealer to schedule the free inspection and upper-control-arm repair for the weld issue that reduces front suspension stability.
- Bring the recall notice if you have it. If not, reference recall number 15V468 when you call.
- Drive cautiously until the repair is complete, and leave extra following distance.
What happens at the repair
At the dealer, a Ram technician inspects the front upper control arms and replaces any affected upper control arm covered by the recall. Parts and labor are free under the recall. If you already paid for this repair, Ram's reimbursement process asks you to send the original receipt or other proof of payment to the company for review and confirmation of the expense. Ask the service desk how to submit that paperwork before your visit.
| Reimbursement | Reimbursement available |
|---|
Timeline
| July 27, 2015 | NHTSA published the recall |
|---|---|
| September 17, 2015 | Owner notification mailed |
| September 19, 2015 | Dealer notification began |
| September 19, 2015 | Dealer notification ended |
Frequently asked questions
What is recall 15V468?
Recall 15V468 covers 199 2015 Ram 5500 and 4500 trucks with an inadequate front upper control arm loop-to-spacer weld. The weld defect can reduce front suspension stability and affect vehicle control, increasing crash risk. Ram dealers will inspect and replace affected upper control arms for free.
What should I do if my 2015 Ram 5500 or 4500 is on this recall?
Check your VIN to confirm your specific truck is included in recall 15V468. If it is, contact a franchised Ram dealer to schedule the front upper control arm inspection. Reference recall 15V468 and Ram campaign R34 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to complete the recall repair at no cost. For recall 15V468, Ram dealers will inspect the front upper control arms and replace any affected parts free of charge.
Is it safe to drive my 2015 Ram 5500 or 4500 before the repair?
This recall does not list a do-not-drive order, but the defect is safety-related. The front upper control arm weld can reduce suspension stability and affect control of the truck. Check your VIN, then schedule the free dealer inspection and repair.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/15V468000 |
|---|---|
| Ram customer service | 1-800-853-1403 |
| NHTSA recall # | 15V468 |
| NHTSA recall # (full) | 15V468000 |
Source documents
-
Download Misc. Document (PDF) - Download Recall Document (PDF) (PDF)
- Download Recall Investigation Document (PDF) (PDF)
- Download Recall Document (PDF) (PDF)
- Download Owner Notification Letter (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on May 31, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →