Recall 15V070 affects 724 2005-2013 Altec Crane Telescopic Jib units for unimpeded jib movement. Retrofit kit installation is free at any franchised Altec dealer.
Altec is recalling 724 2005-2013 Crane Telescopic Jib units because the telescopic jib can move without restraint when the limiting pin is not inserted in the correct position. That movement can increase the risk of injury to the operator or people nearby, and Altec dealers will complete the recall repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The telescopic jib on the 2005-2013 Altec Crane Telescopic Jib is the extendable crane attachment used to reach out from the main boom. In normal use, the jib slides between retracted and extended positions, and a limiting pin secures the outer section to the inner section so it stays where the operator sets it.
On affected jibs, the problem starts when the limiting pin is inserted in the wrong pinning position. That leaves the telescoping sections without the intended restraint, so the outer section has unimpeded movement instead of being held in place. Altec's retrofit kit uses a high visibility jib pin, a cable lanyard matched to the jib length, and a spring at the jib tip to guide the pin toward the correct location as the jib extends.
There is no warning sign before failure. The condition depends on whether the pin is placed correctly during setup, so owners and operators should treat pin position as the key check before use.
Who's affected?
One Crane Telescopic Jib model is included across nine model years, with the same equipment component listed for each year.
| 2007 Altec Crane Telescopic Jib | Equipment |
|---|---|
| 2010 Altec Crane Telescopic Jib | Equipment |
| 2011 Altec Crane Telescopic Jib | Equipment |
| 2013 Altec Crane Telescopic Jib | Equipment |
| 2012 Altec Crane Telescopic Jib | Equipment |
| 2008 Altec Crane Telescopic Jib | Equipment |
| 2006 Altec Crane Telescopic Jib | Equipment |
| 2005 Altec Crane Telescopic Jib | Equipment |
| 2009 Altec Crane Telescopic Jib | Equipment |
| Units affected | 724 |
| Field incidents | NHTSA has logged 2 field incidents to date. |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific vehicle is included.
What's the safety risk?
Uncontrolled jib movement can injure the operator or people working nearby. Keep clear of the jib area, stop using the equipment if the jib does not stay secured, and schedule the retrofit promptly. Repair is free at any franchised Altec dealer.
What should I do?
- Check your VIN to confirm your 2005-2013 Altec Crane Telescopic Jib is included in this recall.
- Contact a franchised Altec dealer to schedule the free retrofit-kit installation that helps the operator place the limiting pin correctly.
- Bring the recall notice if Altec mailed one. If not, reference recall number 15V070 when you call.
- Avoid operating the telescopic jib if the limiting pin position is unclear, and keep bystanders clear until the retrofit kit is installed.
What happens at the repair
At the dealer, an Altec technician installs the retrofit kit for the telescopic jib. The kit helps the operator place the limiting pin correctly so the jib is not left free to move because of a pin position error. The recall repair is free, including parts and labor. Altec has a general reimbursement plan on file. If you already paid for a related jib or limiting pin repair before the recall work, bring your receipts and repair paperwork to the service desk or contact Altec customer service to start a claim.
| Reimbursement | Reimbursement available |
|---|
Timeline
| February 6, 2015 | NHTSA published the recall |
|---|---|
| March 3, 2015 | VIN-searchable in NHTSA's database — Check your VIN to see whether this recall applies to your specific vehicle. |
| March 3, 2015 | Interim owner notification (was planned for this date) |
| March 10, 2015 | Owner notification mailed |
Frequently asked questions
What is recall 15V070?
Recall 15V070 covers 724 2005-2013 Altec Crane Telescopic Jib units where the telescopic jib can move without restraint if the limiting pin is not inserted in the correct position. Altec dealers will install a retrofit kit that helps the operator place the pin correctly.
What should I do if my 2005-2013 Altec Crane Telescopic Jib is on this recall?
Check your VIN to confirm your specific unit is included in recall 15V070. If it is, contact an Altec dealer or Altec customer service at 1-877-462-5832 to arrange the free retrofit kit installation. Reference Altec recall CSN 610 when you call.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost, and Altec dealers will install the retrofit kit free of charge. The recall repair began on March 10, 2015, so the remedy is available now.
What is the safety risk?
The risk is injury to the operator or people nearby. If the limiting pin is placed incorrectly, the telescopic jib can move without restraint. Confirm the unit by VIN, then have an Altec dealer install the free retrofit kit.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/15V070000 |
|---|---|
| Altec customer service | 1-877-462-5832 |
| NHTSA recall # | 15V070 |
| NHTSA recall # (full) | 15V070000 |
Source documents
-
Download Owner Notification Letter (PDF) - Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 1, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →