Recall 15V055 covers 249 2015 Husqvarna Fe 501 S and Fe 350 S motorcycles with loose fork rods. Free repair at any franchised Husqvarna dealer.
Husqvarna is recalling 249 2015 Fe 501 S and Fe 350 S motorcycles because an insufficiently tightened fork-cap connection can let the piston rod become stuck inside the fork leg. A detached piston rod can make the front suspension malfunction and destabilize the motorcycle, increasing crash risk; Husqvarna dealers will complete the repair free of charge.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The front suspension forks on the 2015 Husqvarna Fe 501 S and Fe 350 S motorcycles hold the front wheel, absorb bumps, and keep the tire controlled against the road or trail. Inside each fork, a piston rod moves through fork oil to control damping. The fork cap closes the top of the fork and anchors that rod.
On affected motorcycles, the threaded joint between the piston rod and fork cap was not tightened to the proper torque during fork assembly. When that joint loosens, the piston rod can detach from the fork cap and stick inside the fork leg. That reduces the fork's ability to move and control the front suspension as designed.
Owners can hear knocking sounds from the fork or feel reduced damping while riding. The source filing also says those warning signs are hard to detect, so a normal-feeling ride does not confirm the fork assembly is safe.
Who's affected?
Covers both Fe 501 S and Fe 350 S models tied to the same front suspension issue.
| 2015 Husqvarna Fe 501 S | front suspension |
|---|---|
| 2015 Husqvarna Fe 350 S | front suspension |
| Units affected | 249 |
| Field incidents | NHTSA has logged no field incidents to date. |
A matching 2015 Husqvarna Fe 501 S or Fe 350 S does not guarantee inclusion. Check your VIN to confirm whether your specific motorcycle is included.
What's the safety risk?
If the piston rod detaches inside the fork leg, the front suspension can malfunction and destabilize the motorcycle, increasing crash risk. Knocking sounds in the fork or weaker damping are warning signs, but the problem is hard to detect. Schedule the inspection soon, and stop riding if the fork feels abnormal. Repair is free at any franchised Husqvarna dealer.
What should I do?
- Check your VIN to confirm your 2015 Husqvarna Fe 501 S or Fe 350 S motorcycle is included in this recall.
- Contact a franchised Husqvarna motorcycle dealer to schedule the free fork piston rod and fork cap torque inspection that fixes the front suspension connection.
- Bring the recall notice if you have it. If not, reference recall number 15V055 and recall TB 1503 when you call.
- Ride cautiously until the repair is complete. Avoid rough roads and high-speed riding if the front suspension feels unstable.
What happens at the repair
At the dealer, a Husqvarna technician checks the tightening torque between the fork piston rod and the fork cap on each affected motorcycle. If the connection is loose, the technician corrects it as part of the recall repair. The inspection and any needed repair are free of charge. If you already paid to fix the same fork defect before the recall work, authorized Husqvarna dealers can offer reimbursement for defects covered by this campaign. Bring prior repair paperwork or payment documentation to the service desk so the dealer can review the claim.
| Reimbursement | Reimbursement available |
|---|
Timeline
| January 21, 2015 | Owner notification mailed |
|---|---|
| February 2, 2015 | NHTSA published the recall |
Frequently asked questions
What is recall 15V055?
Recall 15V055 covers 249 2015 Husqvarna Fe 501 S and Fe 350 S motorcycles with a front suspension fork issue. The threaded connection between the piston rod and fork cap was not tightened enough, which can let the piston rod detach inside the fork leg. Husqvarna dealers inspect and correct it for free.
What should I do if my 2015 Husqvarna Fe 501 S or Fe 350 S is on this recall?
Check your VIN to confirm your specific motorcycle is included in recall 15V055. If it is, contact a franchised Husqvarna motorcycle dealer to schedule the fork inspection and correction. Reference recall 15V055 or Husqvarna recall TB 1503 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost. A franchised Husqvarna motorcycle dealer will inspect the torque between the fork piston rod and fork cap, then correct it as needed, free of charge.
What is the safety risk?
The safety risk is front suspension malfunction. If the piston rod detaches inside the fork leg, the motorcycle can become unstable, increasing crash risk. Check your VIN first, then have a Husqvarna motorcycle dealer complete the free inspection and correction if your motorcycle is included.
What if I bought this Husqvarna motorcycle used?
The free recall repair still applies. Recall coverage follows the motorcycle, not the first owner. Check your VIN to confirm whether your 2015 Husqvarna Fe 501 S or Fe 350 S is included, then call a franchised Husqvarna motorcycle dealer and reference recall 15V055.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/15V055000 |
|---|---|
| Husqvarna customer service | 1-888-985-6090 |
| NHTSA recall # | 15V055 |
| NHTSA recall # (full) | 15V055000 |
Source documents
-
Download Owner Notification Letter (PDF) - Download Recall Document (PDF) (PDF)
- Download Owner Notice (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 1, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →