Recall 15V007 affects 337 2014-2015 Aprilia Caponord 1200 and Shiver 750 motorcycles for loose sprocket screws. Repair will be free once available.
Aprilia is recalling 337 2014-2015 Shiver 750 and 2015 Caponord 1200 motorcycles because improper machining of the output gear shaft face can let the sprocket fastening screw loosen and lock the rear wheel. A rear wheel lockup increases the risk of a crash, and the Aprilia dealer repair will be free once it is available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The output gear shaft on the 2014-2015 Aprilia Caponord 1200 and Shiver 750 is part of the manual transmission. It carries engine power out of the gearbox to the drive sprocket, which turns the chain and rear wheel. The sprocket fastening screw keeps that sprocket secured to the shaft while the motorcycle is under load.
On affected motorcycles, the face of the output gear shaft was not machined correctly because of a supplier manufacturing problem. That incorrect surface lets the sprocket fastening screw loosen instead of staying clamped in place. If the screw loosens far enough, the sprocket connection can fail and the rear wheel can lock up.
There is no warning sign before failure. An owner should not rely on noise, vibration, or a dashboard light to confirm this defect before having an Aprilia dealer inspect the output gear shaft.
Who's affected?
Covers the Caponord 1200 and Shiver 750 across the 2014 and 2015 model years, both tied to the manual transmission.
| 2015 Aprilia Caponord 1200 | manual transmission |
|---|---|
| 2014 Aprilia Shiver 750 | manual transmission |
| 2015 Aprilia Shiver 750 | manual transmission |
| Units affected | 337 |
| Field incidents | NHTSA has logged no field incidents to date. |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific motorcycle is included.
What's the safety risk?
A rear wheel lockup increases the risk of a crash because the tire stops rotating while the motorcycle is moving. There is no warning sign before failure, so schedule the inspection and repair promptly if your VIN is included. Repair will be free at any franchised Aprilia dealer once available.
What should I do?
- Check your VIN to confirm your 2014-2015 Aprilia Caponord 1200 or Shiver 750 is included in this recall.
- Watch for Aprilia's owner notice before scheduling the dealer repair.
- Call Aprilia customer service at 1-212-380-4433 or a franchised Aprilia dealer with questions, and reference recall number 15V007.
- Ask the dealer about the free output-shaft inspection and replacement that addresses the loose sprocket fastener and rear-wheel lockup risk.
- Ride cautiously until the inspection is complete, and stop riding if the rear wheel binds or the drivetrain feels abnormal.
What happens at the repair
At the dealer, an Aprilia technician inspects the output shaft connected to the sprocket fastening screw. Once the repair path is open, if the shaft is defective, the technician replaces it at no charge under the recall. Because the remedy status is not listed as available, treat the dealer repair as free once Aprilia opens the final repair path. Ask the Aprilia dealer to confirm parts availability and whether the motorcycle needs to stay parked until inspection is complete.
Timeline
| January 9, 2015 | NHTSA published the recall |
|---|---|
| January 12, 2015 | Dealer notification began |
| January 12, 2015 | Interim owner notification (was planned for this date) |
| January 13, 2015 | Dealer notification ended |
| January 28, 2015 | Owner notification mailed |
Frequently asked questions
What is recall 15V007?
Recall 15V007 covers 337 2014-2015 Aprilia Caponord 1200 and Shiver 750 motorcycles with an improperly machined output gear shaft face. The sprocket fastening screw can loosen, and the rear wheel can lock up. Aprilia dealers inspect the output shaft and replace defective parts for free.
What should I do if my 2014-2015 Aprilia Caponord 1200 or Shiver 750 is on this recall?
Check your VIN to confirm your specific motorcycle is included in recall 15V007. If it is, contact a franchised Aprilia dealer to arrange the output-shaft inspection. Reference recall number 15V007 when you call. The dealer replaces any defective output shaft at no cost.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Aprilia dealers inspect the output shaft and replace any defective output shaft free of charge. Piaggio customer service is listed at 1-212-380-4433 for recall questions.
What is the safety risk?
The safety risk is rear wheel lockup. If the sprocket fastening screw loosens because of the improperly machined output gear shaft face, the rear wheel can lock up and increase crash risk. Confirm your VIN, then arrange the free dealer inspection and repair.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/15V007000 |
|---|---|
| Aprilia customer service | 1-212-380-4433 |
| NHTSA recall # | 15V007 |
| NHTSA recall # (full) | 15V007000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Recall Document (PDF) (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 1, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →