Recall 14V716 covers 101 2014-2015 Kenworth K270, 220, and K370 trucks for defective brake valves. Repair is free at any franchised Kenworth dealer.
Kenworth is recalling 101 2014-2015 trucks equipped with certain Wabco quick release valves, including K270, K370, and 220 models, because a defective valve seat can disrupt air pressure control. Improper valve seating can reduce braking performance and increase crash risk; Kenworth dealers will complete the free recall repair.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The parking brake quick release valve with double check is part of the air brake system on affected 2014-2015 Kenworth trucks. Its job is to manage air flow when the parking brake is released, so the spring brakes receive enough air pressure to move from parked to released. The valve also helps the system respond without holding trapped air in the brake circuit.
On these trucks, the valve seat was built with sharp edges and excess material left on its ribs during component manufacturing. That defective seat does not seal the way it should. Air leaks through the valve, which reduces pressure delivery to the spring brakes and makes the compressor work longer to rebuild air pressure.
Drivers can hear an air leak when the parking brake is released. Other warning signs include longer or more frequent air compressor run time, a low air pressure warning, an unusual air pressure gauge reading, or a park brake warning indicator.
Who's affected?
Spans K270, K370, and 220 trucks from the 2014 and 2015 model years, all tied to the parking brake.
| 2015 Kenworth K270 | Parking brake |
|---|---|
| 2015 Peterbilt 220 | Parking brake |
| 2015 Kenworth K370 | Parking brake |
| 2014 Peterbilt 220 | Parking brake |
| Units affected | 101 |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific truck is included.
What's the safety risk?
Improperly seated valves can adjust air pressure incorrectly, reducing braking performance and increasing the risk of a crash. Watch for an audible air leak when the parking brake is released, longer or frequent air compressor run time, low-pressure warnings, or unusual gauge readings. Schedule the recall repair soon. Repair is free at any franchised Kenworth dealer.
What should I do?
- Check your VIN to confirm your 2014-2015 Kenworth K270, 220, or K370 is included in this recall.
- Contact a franchised Kenworth dealer to schedule the free Wabco quick-release valve replacement that restores proper air-pressure control for braking.
- Bring the recall notice if Kenworth has mailed one. If not, reference recall number 14V716 when you call.
- Drive cautiously until the repair is complete. Leave extra stopping distance because the defect reduces braking performance.
- Call Kenworth customer service at 1-425-468-7400 with questions about the free recall repair.
What happens at the repair
At the dealer, a Kenworth technician replaces the Wabco quick release valves with double check valves covered by recall 14V716. The work addresses the defective valve seat described in the filing, so the air brake valve assembly is replaced rather than adjusted. The recall repair is free, and parts and labor are covered. Before the truck is written up, ask the service desk to confirm the VIN is included and that the valve replacement is the open recall repair.
Timeline
| November 7, 2014 | NHTSA published the recall |
|---|---|
| December 30, 2014 | Owner notification mailed |
Frequently asked questions
What is recall 14V716?
Recall 14V716 covers 101 2014-2015 Kenworth K270, 220, and K370 trucks equipped with certain Wabco quick release valves with double check. A defective valve seat can adjust air pressure incorrectly, reduce braking performance, and increase crash risk. Kenworth dealers will replace the valves for free.
What should I do if my 2014-2015 Kenworth K270, 220, or K370 is on this recall?
Check your VIN to confirm your specific truck is included in recall 14V716. If it is, contact a franchised Kenworth dealer to schedule the valve replacement. Reference recall number 14V716 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost to owners, and Kenworth dealers will replace the affected valves free of charge. Parts and labor are covered for any truck included in recall 14V716.
What is the safety risk in recall 14V716?
The safety risk is reduced braking performance. The defective valve seat can cause incorrect air-pressure adjustment in the brake system, which increases crash risk. If your VIN is included, schedule the free valve replacement with a franchised Kenworth dealer.
What if I bought this truck used?
The free recall repair still applies. Recall coverage follows the truck, not the first owner. Check your VIN to confirm whether your specific truck is included in recall 14V716, then call a franchised Kenworth dealer and reference the recall number.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/14V716000 |
|---|---|
| Kenworth customer service | 1-425-468-7400 |
| NHTSA recall # | 14V716 |
| NHTSA recall # (full) | 14V716000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Recall Report (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 1, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →