Recall 12V260 affects 1,770 2007-2012 Vermeer BC1500 trailers for faulty frame welds that lead to frame failure. Repair is free at any franchised Vermeer dealer.
Vermeer is recalling 1,770 2007-2012 BC1500 trailers because an incorrectly welded section of the main frame can lead to bending, fatigue fractures, and frame failure. Frame failure raises the risk of personal injury or property damage; the Vermeer dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The main frame on a 2007-2012 Vermeer BC1500 trailer is the steel structure that carries the trailer body, chipper equipment, axle mounts, and tongue. It keeps the trailer rigid while it is being towed and while the machine is working under load. That structure depends on the welded joints holding their shape as the frame flexes.
On affected BC1500 trailers, a section of the main frame was incorrectly welded during assembly. A weak weld leaves that area less able to handle repeated bending. Over use, the frame can develop bending damage or fatigue fractures, which can lead to frame failure.
There is no warning sign before failure. The recall information does not identify a noise, light, or handling change that owners can count on before the frame gives way, so the VIN and dealer repair path decide the next step.
Who's affected?
Spans 6 model years, with the same body or structural component listed throughout.
| 2009 Vermeer BC1500 | body or structural component |
|---|---|
| 2011 Vermeer BC1500 | body or structural component |
| 2010 Vermeer BC1500 | body or structural component |
| 2008 Vermeer BC1500 | body or structural component |
| 2007 Vermeer BC1500 | body or structural component |
| 2012 Vermeer BC1500 | body or structural component |
| Units affected | 1,770 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether this recall applies to your specific vehicle.
What's the safety risk?
Frame failure raises the risk of personal injury or property damage. Until the recall repair is complete, use extra caution, keep operation within manufacturer limits, and arrange dealer service soon if your VIN is included. Repair will be free at any franchised Vermeer dealer once available.
What should I do?
- Check your VIN to confirm your 2007-2012 Vermeer BC1500 is included in this recall.
- Contact a franchised Vermeer dealer to confirm repair timing for recall number 12V260.
- Schedule the free main-frame weld repair that addresses the incorrectly welded frame section.
- Bring the recall notice if Vermeer mailed one, and give the dealer recall number 12V260 when you call.
- Avoid hauling or road use if you see bending, cracking, or frame damage before the repair.
What happens at the repair
At the dealer, a Vermeer technician repairs the affected trailer frame condition tied to the incorrect weld in the main frame. The recall repair is free. The filing does not give a more detailed parts list or labor time, so the service desk will confirm the exact repair steps for your BC1500 after checking the VIN. Parts and labor are covered under the recall once the repair is open for your VIN.
Timeline
| June 8, 2012 | NHTSA published the recall |
|---|---|
| July 30, 2012 | Owner notification mailed |
Frequently asked questions
What is recall 12V260?
Recall 12V260 covers 1,770 2007-2012 Vermeer BC1500 trailers with a main frame section that was incorrectly welded during assembly. Bending or fatigue fractures can lead to frame failure, increasing the risk of personal injury or property damage.
What should I do if my 2007-2012 Vermeer BC1500 is on this recall?
Check your VIN to confirm your specific trailer is included in recall 12V260. If it is, contact Vermeer at 641-628-3141 or your Vermeer service contact to arrange the frame repair. Reference recall number 12V260 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair safety defects at no cost, and Vermeer said it will repair affected BC1500 trailers free of charge. Parts and labor are covered for trailers included in recall 12V260.
What is the safety risk with this Vermeer BC1500 recall?
The safety risk is frame failure. The recalled BC1500 trailers have an incorrectly welded main frame section, and bending or fatigue fractures can lead to failure. Vermeer reports that frame failure increases the risk of personal injury or property damage.
What if I bought my Vermeer BC1500 used?
The free recall repair still applies. A used trailer can remain included in recall 12V260 even if the original owner received the notice. Check your VIN, then contact Vermeer at 641-628-3141 or your Vermeer service contact if the trailer is included.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/12V260000 |
|---|---|
| Vermeer customer service | 641-628-3141 |
| NHTSA recall # | 12V260 |
| NHTSA recall # (full) | 12V260000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Recall Investigation Document (PDF) (PDF)
- Download Recall Document (PDF) (PDF)
- Download Recall Document (PDF) (PDF)
- Download Defect / Noncompliance Notice (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 2, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →