Recall 11V574 affects 128,616 2010-2011 Mercury Milan and Fusion vehicles for fracturing wheel studs. Repair will be free at any franchised Mercury dealer once available.
Mercury is recalling 128,616 2010-2011 Milan and Fusion vehicles equipped with 17 inch steel wheels because wheel studs can fracture and let a wheel separate. While driving, multiple stud fractures can cause vibration or wheel separation, increasing crash risk, and the dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The wheel studs on 2010-2011 Mercury Milan and Fusion vehicles are the threaded metal posts that pass through the wheel and hold the lug nuts. On vehicles with 17 inch steel wheels, those studs clamp the wheel tightly against the hub so it stays centered while the car accelerates, brakes, and turns.
In this recall, the studs on affected vehicles are at risk of fracturing. A fractured stud reduces the clamping force that keeps the wheel attached to the hub. If enough clamping force is lost, the wheel separates from the vehicle, which creates an immediate loss of control risk.
There is no warning sign before failure in the recall information. Before any trip, look for loose or missing lug nuts, vibration, or wheel noise, but do not treat the absence of those signs as proof that the studs are safe.
Who's affected?
Covers the Milan and Fusion across the 2010 and 2011 model years, all tied to the same wheel fastener issue.
| 2010 Mercury Milan | wheel fastener (lug, nut, bolt, or stud) |
|---|---|
| 2010 Ford Fusion | wheel fastener (lug, nut, bolt, or stud) |
| 2011 Ford Fusion | wheel fastener (lug, nut, bolt, or stud) |
| 2011 Mercury Milan | wheel fastener (lug, nut, bolt, or stud) |
| Units affected | 128,616 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether this recall applies to your specific sedan.
What's the safety risk?
While driving, multiple wheel stud fractures can cause vehicle vibration or wheel separation, increasing the risk of a crash. If you feel vibration, slow down, pull over when safe, and contact the dealer. Repair will be free at any franchised Mercury dealer once available.
What should I do?
- Check your VIN to confirm your 2010-2011 Mercury Milan or Fusion is included in this recall.
- Contact a franchised Mercury dealer to ask whether the rear brake disc inspection and wheel lug nut replacement are open for your VIN.
- Reference recall number 11V574 when you call the dealer.
- Bring the owner notice if you have it, and ask the dealer to inspect the rear brake disc surface and replace the wheel lug nuts.
- Drive carefully until the repair is complete. Stop driving and call the dealer if you feel vehicle vibration.
What happens at the repair
Once the dealer repair is available, a Mercury technician will inspect the rear brake disc surface for flatness and replace any rear brake discs that do not sit flat. The technician will also replace the wheel lug nuts on all four wheels. Parts and labor will be covered under the recall. Ask the service desk to confirm appointment timing when the repair opens, since the remedy text does not give a service-duration estimate.
Timeline
| December 7, 2011 | NHTSA published the recall |
|---|---|
| January 18, 2012 | Owner notification mailed |
Frequently asked questions
What is recall 11V574?
Recall 11V574 covers 128,616 2010-2011 Mercury Milan and Fusion vehicles with 17 inch steel wheels. The wheel studs can fracture, leading to vibration or wheel separation while driving and increasing crash risk. Dealers inspect the rear brake disc surface, replace discs as needed, and replace the lug nuts.
What should I do if my 2010-2011 Mercury Milan or Fusion is on this recall?
Check your VIN to confirm your specific vehicle is included in recall 11V574. If it is, contact a franchised Mercury dealer and ask for the rear brake disc inspection, disc replacement if needed, and lug nut replacement. Reference recall number 11V574 when you call.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the safety defect at no cost. For recall 11V574, the dealer inspects the rear brake disc surface, replaces rear brake discs as needed, and replaces the wheel lug nuts on all wheels free of charge.
What is the safety risk?
The safety risk is wheel separation while driving. The official consequence says multiple wheel stud fractures can happen at a wheel location, causing vehicle vibration or wheel separation and increasing crash risk. If you notice vibration, slow down, stop in a safe place, and arrange dealer service.
What if I bought this vehicle used?
The free recall repair still applies. Recall coverage follows the VIN, not the first owner. Check your VIN to confirm whether your 2010-2011 Mercury Milan or Fusion is included, then call a franchised Mercury dealer with recall number 11V574.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/11V574000 |
|---|---|
| Mercury customer service | 1-866-436-7332 |
| NHTSA recall # | 11V574 |
| NHTSA recall # (full) | 11V574000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Recall Investigation Document (PDF) (PDF)
- Download Recall Document (PDF) (PDF)
- Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Defect / Noncompliance Notice (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 2, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →