Recall 11V345 affects 40 2008-2009 Vermeer BC2100XL trailers for a high-stress welded assembly that can bend or crack. Repair is free at franchised Vermeer dealers.
Vermeer is recalling 40 2008-2009 BC2100XL tandem axle Brush Clipper trailers because a welded assembly at the front of the mainframe is under high stress and can bend or crack. That failure raises the risk of injury to operators or bystanders, and the Vermeer dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The welded assembly on the front of the mainframe is a structural attachment on 2008-2009 Vermeer BC2100XL tandem axle brush chipper trailers. The mainframe is the trailer's heavy support structure, and this front assembly helps carry and transfer load while the trailer is being towed and the chipper equipment is supported.
On the recalled BC2100XL trailers, the welded assembly is subject to high stress levels. That stress concentrates force at the welded attachment and the nearby frame area. When a structural weld is loaded harder than intended, the attachment point loses the strength it needs to keep the front of the trailer properly supported.
There is no warning sign before failure. Owners should not expect a dashboard light, alarm, or clear symptom from the trailer before the welded assembly fails.
Who's affected?
Spans 2 model years for the BC2100XL, with Equipment listed as the recalled component.
| 2008 Vermeer BC2100XL | Equipment |
|---|---|
| 2009 Vermeer BC2100XL | Equipment |
| Units affected | 40 |
The year and model narrow the scope, but the VIN decides. Check your VIN to confirm whether your specific vehicle is included.
What's the safety risk?
If the welded assembly bends or develops fatigue cracks, the equipment can create an injury risk for operators and bystanders. Keep people clear of the machine if you see bending or cracks in that assembly, and contact a Vermeer dealer for recall instructions. Repair will be free at any franchised Vermeer dealer once available.
What should I do?
- Check your VIN to confirm your 2008-2009 Vermeer BC2100XL is included in this recall.
- Contact a franchised Vermeer dealer to confirm the free welded-assembly replacement that fixes the stressed front mainframe attachment.
- Bring the recall notice if Vermeer mailed one. If not, reference recall number 11V345 when you call.
- Keep operators and bystanders clear of the brush clipper trailer until Vermeer confirms the welded-assembly repair is complete.
What happens at the repair
Vermeer said field kit modifications were being developed. Once the repair is available, a Vermeer technician will replace the welded assembly attached to the front of the mainframe with a new design. The recall repair will be free, with parts and labor covered. Ask the dealer to confirm the current kit status before bringing in the BC2100XL, because the filing does not list a final repair status.
Timeline
| June 30, 2011 | NHTSA published the recall |
|---|---|
| September 12, 2011 | Owner notification mailed |
Frequently asked questions
What is recall 11V345?
Recall 11V345 covers 40 2008-2009 Vermeer BC2100XL tandem axle brush chipper trailers with a welded assembly at the front of the mainframe. High stress on that assembly can bend it or create fatigue cracks, increasing injury risk for operators or bystanders.
What should I do if my 2008-2009 Vermeer BC2100XL is on this recall?
Check your VIN to confirm your specific trailer is included in recall 11V345. If it is, contact a Vermeer dealer and reference recall 11V345. The dealer repair replaces the welded assembly with a new design, and the repair is free.
Is the recall repair free?
Yes. Federal recall law requires the defect repair at no cost to the owner, and Vermeer said dealers will replace the welded assembly with a new design free of charge. Ask the dealer to confirm parts availability before moving the trailer in for service.
What is the safety risk?
The safety risk is personal injury to equipment operators or bystanders. The welded assembly at the front of the mainframe is subject to high stress, which can bend the assembly or create fatigue cracks. Stop using the trailer until a Vermeer dealer confirms the repair path.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/11V345000 |
|---|---|
| Vermeer customer service | 1-641-628-3141 |
| NHTSA recall # | 11V345 |
| NHTSA recall # (full) | 11V345000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Recall Document (PDF) (PDF)
- Download Owner Notification Letter (PDF)
- Download Defect / Noncompliance Notice (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 2, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →