Recall 11V305 affects 840 2011 Victory Cross Country motorcycles for defective handlebar clamps or risers. Repair is free at any franchised Victory dealer.
Victory is recalling 840 2011 Cross Country motorcycles because the handlebar clamps or risers were machined incorrectly. If the handlebars slip in the clamps, the operator can lose control and the risk of a crash increases; the dealer repair will be free once Victory makes the remedy available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The handlebar clamps and risers on the 2011 Victory Cross Country hold the handlebars in a fixed position on the motorcycle's steering assembly. The risers lift the bars to the rider's hand position, and the clamps squeeze around the bar so steering input from the rider turns the front wheel as intended.
On the recalled motorcycles, the clamps, the risers, or both were machined incorrectly. That means the clamping surfaces do not hold the handlebar with the grip the design requires. Under riding loads, the handlebar can slip inside the clamp instead of staying locked in place. When that happens, the bar position shifts and the rider's steering input no longer matches the expected handlebar position.
There is no warning sign before failure. If the bar feels loose, moves when pressure is applied, or sits at a different angle than before, treat that as a sign the clamp is not holding correctly.
Who's affected?
| 2011 Victory Cross Country | steering wheel |
|---|---|
| Units affected | 840 |
Not every 2011 Victory Cross Country motorcycle is on the list. Check your VIN to confirm whether your specific motorcycle is included.
What's the safety risk?
A defective riser or clamp assembly can cause the operator to lose control, increasing crash risk. If your VIN is included, schedule the recall repair soon and ask the dealer whether the motorcycle is safe to ride before the appointment. Repair will be free at any franchised Victory dealer once available.
What should I do?
- Check your VIN to confirm your 2011 Victory Cross Country is included in this recall.
- Call Victory consumer service at 1-888-704-5290 to confirm the current repair path before you ride.
- Contact a franchised Victory dealer to schedule the free handlebar riser and clamp test and replacement that fixes clamps or risers that let the handlebars slip.
- Bring the recall notice if Victory mailed one. If not, reference recall number 11V305 when you call.
- Avoid riding if the handlebars feel loose or slip in the clamps; arrange transport to the dealer instead.
What happens at the repair
At the dealer, a Victory technician tests the handlebar riser and clamp assemblies to confirm whether the parts were machined incorrectly. If a riser or clamp assembly is defective, the dealer replaces it under the recall. Parts and labor are free. The repair targets the clamp and riser hardware that holds the handlebars in place on the Cross Country motorcycle.
Timeline
| June 1, 2011 | NHTSA published the recall |
|---|---|
| June 17, 2011 | Owner notification mailed |
Frequently asked questions
What is recall 11V305?
Recall 11V305 covers 840 2011 Victory Cross Country motorcycles with handlebar clamps or risers that were machined incorrectly. The handlebars can slip in the clamps, which can cause loss of control and increase crash risk. Victory dealers will test and replace defective riser and clamp assemblies for free.
What should I do if my 2011 Victory Cross Country is on this recall?
Check your VIN to confirm your motorcycle is included in recall 11V305. If it is, contact a franchised Victory dealer to schedule the handlebar clamp and riser inspection. Reference recall number 11V305000 when you call. The dealer repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair the defect at no cost. Victory dealers will test the handlebar riser and clamp assemblies and replace defective parts free of charge.
What is the safety risk on recall 11V305?
The risk is loss of control. If the handlebar clamps or risers were machined incorrectly, the handlebars can slip in the clamps while riding. That can make the motorcycle harder to control and increase crash risk. Check your VIN before scheduling the free dealer repair.
What if I bought my 2011 Victory Cross Country used?
The free recall repair still applies. Recall coverage follows the motorcycle, not the first owner. Check your VIN to confirm whether your Cross Country is included, then call a franchised Victory dealer and reference recall number 11V305000.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/11V305000 |
|---|---|
| Victory customer service | 1-888-704-5290 |
| NHTSA recall # | 11V305 |
| NHTSA recall # (full) | 11V305000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Recall Document (PDF) (PDF)
- Download Owner Notification Letter (PDF)
- Download Defect / Noncompliance Notice (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 2, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →