Recall 11V262 affects 140 2009-2011 Vermeer BC1200XL brush chipper trailers with incorrect lug nuts. Repair is free at any franchised Vermeer dealer.
Vermeer is recalling 140 2009-2011 BC1200XL single axle brush chipper trailers because the wrong lug nuts were installed with the 285/75/R16 flotation tire option. Those lug nuts can loosen, damage the wheel disc, and lead to wheel separation from the trailer, increasing crash risk; the Vermeer dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The lug nuts on a 2009-2011 Vermeer BC1200XL brush chipper trailer hold each wheel tightly against the wheel hub. On trailers with the 285/75/R16 flotation tire option, the nut has to match the tapered countersink in the wheel disc so clamping force stays centered and tight.
The recall issue is that the wrong lug nuts were installed during assembly. Because the nut shape does not match the countersink holes in the wheel disc, the nuts do not seat correctly. As the trailer moves and the wheel loads change, that poor fit can let the lug nuts loosen instead of holding the wheel firmly in place.
There is no warning sign before failure. An owner should not rely on noise, vibration, or a dashboard alert to catch this before a wheel connection fails.
Who's affected?
Spans the 2009, 2010, and 2011 BC1200XL model years, all tied to the same wheel fastener issue.
| 2009 Vermeer BC1200XL | wheel fastener (lug, nut, bolt, or stud) |
|---|---|
| 2011 Vermeer BC1200XL | wheel fastener (lug, nut, bolt, or stud) |
| 2010 Vermeer BC1200XL | wheel fastener (lug, nut, bolt, or stud) |
| Units affected | 140 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific vehicle is included.
What's the safety risk?
Loose lug nuts can damage the wheel disc and let a wheel separate from the trailer, increasing the risk of a crash. If your VIN is included, schedule the lug nut repair soon and limit trailer use until a dealer checks the wheel hardware. Repair will be free at any franchised Vermeer dealer once available.
What should I do?
- Check your VIN to confirm your 2009-2011 Vermeer BC1200XL is included in this recall.
- Watch for Vermeer's owner notice, or call Vermeer customer service at 1-641-628-3141 to ask about recall number 11V262.
- Ask a franchised Vermeer dealer whether the free lug-nut replacement that fixes the wheel hardware mismatch is open for your trailer.
- Bring the recall notice if you have it when you contact the dealer.
- Avoid operating the chipper trailer until Vermeer confirms the lug nuts match the wheel discs.
What happens at the repair
At the dealer, a Vermeer technician replaces the incorrect lug nuts installed with the 285/75/R16 flotation tire option. The lug nuts do not match the countersink holes in the wheel disc, so the repair uses the correct lug nuts for that wheel setup. The remedy says the replacement is free of charge. Once the dealer repair is available for your VIN, parts and labor are covered under the recall.
Timeline
| April 28, 2011 | NHTSA published the recall |
|---|---|
| June 1, 2011 | Owner notification mailed |
Frequently asked questions
What is recall 11V262?
Recall 11V262 covers 140 2009-2011 Vermeer BC1200XL single axle brush chipper trailers with the 285/75/R16 flotation tire option. Incorrect lug nuts were installed, and they do not match the wheel disc countersink holes. Vermeer dealers will replace the lug nuts for free.
What should I do if my 2009-2011 Vermeer BC1200XL is on this recall?
Check your VIN to confirm your specific brush chipper trailer is included in recall 11V262. If it is, contact a franchised Vermeer dealer to schedule the lug nut replacement. Reference recall 11V262 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires manufacturers to repair the defect at no cost. Vermeer dealers will replace the incorrect lug nuts free of charge, including parts and labor, for trailers included in recall 11V262.
What is the safety risk in recall 11V262?
The safety risk is wheel separation from the trailer. Loose lug nuts can damage the wheel disc and allow a wheel to separate, increasing crash risk. If your VIN is included, arrange the free lug nut replacement with a Vermeer dealer.
What if I bought my Vermeer BC1200XL used?
The free recall repair still applies. Federal recall law requires manufacturers to honor safety recalls regardless of ownership history. Check your VIN to confirm whether your specific trailer is included, then reference recall 11V262 when you contact a Vermeer dealer.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/11V262000 |
|---|---|
| Vermeer customer service | 1-641-628-3141 |
| NHTSA recall # | 11V262 |
| NHTSA recall # (full) | 11V262000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Defect / Noncompliance Notice (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 2, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →