Recall 10V578 affects 6,475 2010-2011 Jaguar Xj vehicles for loose windshield wiper arm fasteners. Repair is free at any franchised Jaguar dealer.
Jaguar is recalling 6,475 2010-2011 Xj vehicles because the front wiper arm securing nuts were not tightened to specification during manufacturing. If the wiper arms lose synchronization and strike each other, they can detach from the vehicle, reducing driver visibility and increasing crash risk; the Jaguar dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The windshield wiper arms on 2010-2011 Jaguar Xj vehicles are the metal arms that hold the wiper blades against the glass. They are mounted to spindles, which are the small rotating shafts that move the arms back and forth. The securing nuts have to be tightened correctly so both arms stay synchronized across the windshield.
On affected Xj vehicles, the front wiper arm fixings were not tightened to specification during manufacturing. If the nuts do not hold as intended, the arms lose synchronization. Instead of sweeping in the planned pattern, the arms can move out of time and strike each other, which leaves the windshield without proper wiping during rain or spray.
There is no warning sign before failure. The first thing an owner notices is the wipers moving unevenly, clashing, or stopping their normal sweep after the securing nuts fail to hold the arms in position.
Who's affected?
The same wiper system component appears across both Xj model years in the scope.
| 2010 Jaguar Xj | wiper system |
|---|---|
| 2011 Jaguar Xj | wiper system |
| Units affected | 6,475 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific sedan is included.
What's the safety risk?
A wiper arm detachment reduces the driver's visibility and increases crash risk. If the wipers clash or move out of sync, pull over when it is safe and arrange dealer service before more driving. Repair will be free at any franchised Jaguar dealer once available.
What should I do?
- Check your VIN to confirm your 2010-2011 Jaguar Xj is included in this recall.
- Contact a franchised Jaguar dealer and ask whether recall 10V578 is open for your VIN.
- Schedule the free wiper-arm securing-nut torque service that keeps the front wiper arms synchronized.
- Bring the recall notice if Jaguar mailed one, and keep recall number 10V578 handy when you call.
- Avoid driving in rain or poor visibility until the dealer confirms the wiper-arm repair is complete.
What happens at the repair
Jaguar's recall remedy is for a dealer to check the front wiper arms where they attach to the spindle, make sure each arm is seated securely, and tighten the securing nuts to the specified torque. The dealer repair will be free once available, with parts and labor covered under the recall. A Jaguar technician handles the wiper arm fitment and nut torque so the wiper arms stay synchronized during operation.
Timeline
| November 12, 2010 | NHTSA published the recall |
|---|---|
| December 13, 2010 | Owner notification mailed |
Frequently asked questions
What is recall 10V578?
Recall 10V578 covers 6,475 2010-2011 Jaguar Xj vehicles with front wiper arm fixings that were not tightened to specification. If the wiper arms lose synchronization and clash, they can detach, reduce driver visibility, and increase crash risk.
What should I do if my 2010-2011 Jaguar Xj is on this recall?
Check your VIN to confirm your specific vehicle is included in recall 10V578. If it is, contact a franchised Jaguar dealer and ask for the wiper arm spindle fixings to be inspected and tightened to the correct torque. Reference recall 10V578 when you call.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to repair this safety defect at no cost. Jaguar dealers will secure the wiper arms on the spindle and tighten the securing nuts to the correct torque free of charge.
What is the safety risk?
The safety risk is reduced visibility and increased crash risk. If the wiper arms lose synchronization and clash, they can detach from the vehicle. If your VIN is included, schedule the free dealer repair before relying on the vehicle in rain or poor visibility.
What if I bought my Jaguar Xj used?
The free repair still applies. Recall coverage follows the vehicle, not the original owner. Check your VIN to confirm whether your specific 2010-2011 Jaguar Xj is included, then call a franchised Jaguar dealer with recall number 10V578.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/10V578000 |
|---|---|
| Jaguar customer service | 1-800-637-6837 |
| NHTSA recall # | 10V578 |
| NHTSA recall # (full) | 10V578000 |
Source documents
-
Download Recall Investigation Document (PDF) (PDF) - Download Recall Document (PDF) (PDF)
- Download Owner Notification Letter (PDF)
- Download Owner Notice (PDF)
- Download Defect / Noncompliance Notice (PDF) (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 3, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →