Recall 10V156 covers 89 2009-2010 Hino NJ8J, NV8J, and ND8J trucks with loose exhaust bolts. Repair is free at any franchised Hino dealer.
Hino is recalling 89 2009-2010 NJ8J, NV8J, and ND8J trucks with vertical exhaust pipes because certain exhaust-system bolts were improperly tightened during manufacturing. If the exhaust system separates, it can fall onto the roadway and be struck by a following vehicle, creating a crash risk; the Hino dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The vertical exhaust pipe on 2009-2010 Hino NJ8J, NV8J, and ND8J trucks carries hot exhaust gases up and away from the cab and body. It is part of the exhaust system, which routes engine gases through metal piping and keeps that hardware attached to the truck while the engine runs and the chassis vibrates.
On affected trucks, certain bolts that hold the exhaust system to the truck were not tightened properly during manufacturing. A loose or under-tightened bolt does not clamp the parts with enough force. With heat, vibration, and normal use, the bolts can fail and let the exhaust system separate from the truck.
There is no warning sign before failure. If you notice new exhaust movement, a louder exhaust note, or visible separation, the attachment has already failed and the truck needs dealer attention.
Who's affected?
Spans NJ8J, NV8J, and ND8J trucks across the 2009-2010 model years, all tied to the exhaust system.
| 2009 Hino NJ8J | Exhaust system |
|---|---|
| 2010 Hino NV8J | Exhaust system |
| 2009 Hino NV8J | Exhaust system |
| 2010 Hino NJ8J | Exhaust system |
| 2010 Hino ND8J | Exhaust system |
| Units affected | 89 |
A matching year and model does not guarantee inclusion. Check your VIN to confirm whether your specific truck is included.
What's the safety risk?
The exhaust system can fall onto the roadway and be struck by a following vehicle, increasing crash risk. If your VIN is included, schedule recall service promptly and avoid driving a vehicle with exhaust parts dragging or hanging loose. Repair will be free at any franchised Hino dealer once available.
What should I do?
- Check your VIN to confirm your 2009-2010 Hino NJ8J, NV8J, or ND8J truck is included in this recall.
- Contact a franchised Hino dealer and ask whether the free exhaust-system bolt repair for recall number 10V156 is open for your VIN.
- Ask the dealer to inspect and secure the vertical exhaust system so the loose mounting bolts no longer let it separate from the truck.
- Bring the recall notice if Hino mailed one. If not, give the dealer recall number 10V156 when you call.
- Drive cautiously until the repair is complete. Keep extra distance from traffic behind you and avoid routes where the exhaust system is under heavy vibration.
What happens at the repair
At the dealer, a Hino technician repairs the vertical exhaust pipe mounting hardware covered by the recall. The work focuses on the bolts that attach the exhaust system to the truck, since loose or failed hardware can let the exhaust system separate from the vehicle. The filing says Hino began the safety recall on November 9, 2010, but this input does not list a current remedy status. The dealer repair will be free once available, with parts and labor covered under the recall.
Timeline
| April 16, 2010 | NHTSA published the recall |
|---|---|
| November 9, 2010 | Owner notification mailed |
Frequently asked questions
What is recall 10V156?
Recall 10V156 covers 89 2009-2010 Hino NJ8J, NV8J, and ND8J trucks with vertical exhaust pipes. Bolts holding the exhaust system to the truck were not properly tightened, which can let the exhaust system separate. Hino dealers repair the vehicles free of charge.
What should I do if my 2009-2010 Hino NJ8J, NV8J, or ND8J is on this recall?
Check your VIN to confirm your specific truck is included in recall 10V156. If it is, contact a franchised Hino dealer to schedule the exhaust-system repair. Reference recall number 10V156 when you call. The dealer repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to fix the defect at no cost, and Hino's recall remedy says dealers will repair the vehicles free of charge. Use a franchised Hino dealer for the covered exhaust-system repair.
What is the safety risk?
The risk is that loose exhaust-system bolts can fail and let the exhaust system separate from the truck. If it falls onto the roadway, a following vehicle can strike it and crash. Hino dealers repair the recalled trucks free of charge.
What if I bought my Hino truck used?
The free repair still applies. Recall coverage follows the VIN, not the first owner. Check your VIN to confirm whether your specific 2009-2010 Hino NJ8J, NV8J, or ND8J is included, then call a franchised Hino dealer with recall number 10V156.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/10V156000 |
|---|---|
| Hino customer service | 248-699-9330 |
| NHTSA recall # | 10V156 |
| NHTSA recall # (full) | 10V156000 |
Source documents
-
Download Recall Document (PDF) (PDF) - Download Owner Notification Letter (PDF)
- Download Recall Document (PDF) (PDF)
- Download Owner Notice (PDF)
- Download Quarterly Report (PDF)
- Download Recall Acknowledgement (PDF)
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 3, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →