Recall 10V048 covers 2 2010 Jayco Insignia motor homes for a brake pedal pin defect. Dealer inspection and C-clamp repair are free.
Jayco is recalling 2 2010 Insignia motor homes under recall 10V048 because the adjustable brake pedal drive pin can disengage. That failure can reduce braking or move the brake pedal into the throttle pedal's path, which raises crash risk; the Jayco dealer repair will be free once available.
Does this recall apply to your specific vehicle?
The official, free per-VIN recall check is run by NHTSA. Enter your VIN and we'll forward you directly — and add you to a free watchlist so you hear about new recalls for your vehicle.
Check my VIN at NHTSARecallNotify doesn't check your VIN — NHTSA's official tool does. We use your email only to alert you to new recalls.
Watch this vehicle for recalls
Add it to your free watchlist and we will alert you as new federal recalls are posted for your year, make and model. New-recall alerts are rolling out now.
You are on the watchlist.
We will email you as new federal recalls are posted for your vehicle.
What's wrong?
The adjustable brake pedal assembly in the 2010 Jayco Insignia lets the driver set the brake pedal position while keeping the pedal arm connected to the rest of the brake linkage. A drive pin is the small securing part that holds the brake pedal arm in place. When you press the brake pedal, that linkage has to stay aligned so pedal force reaches the braking system.
On affected Insignia motor homes, that drive pin can become disengaged from the pedal assembly. If the pin comes loose, the brake pedal arm no longer stays where it belongs. Braking is reduced, and the loose or shifted pedal can move into the throttle pedal area and interfere with throttle pedal function.
There is no warning sign before failure. If the brake pedal shifts out of position or the throttle pedal does not respond normally, treat that as a sign the assembly has already moved and arrange dealer service.
Who's affected?
| 2010 Jayco Insignia | hydraulic brake system |
|---|---|
| Units affected | 2 |
Not every 2010 Jayco Insignia is on the list. Check your VIN to confirm whether your specific motorhome is included.
What's the safety risk?
Reduced braking or interference with the throttle pedal can make the 2010 Jayco Insignia harder to stop or control and can result in a crash. If your VIN is included, schedule dealer service soon and ask about the brake pedal inspection and C-clamp installation. Repair will be free at any franchised Jayco dealer once available.
What should I do?
- Check your VIN to confirm your 2010 Jayco Insignia is included in this recall.
- Contact Jayco customer service at 1-800-283-8267 to confirm the brake-pedal kit status for your VIN.
- Ask a franchised Jayco dealer about the free adjustable-brake-pedal inspection and C-clamp installation that secures the pedal arm.
- Reference recall number 10V048 when you call the dealer or Jayco customer service.
- Drive cautiously until the repair is complete. Leave extra following distance and avoid hard braking.
What happens at the repair
Once Jayco makes the dealer remedy available, a Jayco technician will inspect the adjustable brake pedal assembly and install a C clamp on the adjustable brake pedal. Parts and labor will be covered under the recall. The source remedy says affected units were in dealer stock and none had been retail sold, so customer owner letters were not planned. If your VIN is included now, ask a Jayco dealer to confirm the campaign and complete the brake pedal inspection and clamp installation before regular use.
Timeline
| February 18, 2010 | NHTSA published the recall |
|---|---|
| February 28, 2010 | Owner notification mailed |
Frequently asked questions
What is recall 10V048?
Recall 10V048 covers 2 2010 Jayco Insignia motor homes with adjustable brake pedals on Freightliner chassis. The brake pedal drive pin can disengage, reducing braking or moving the brake pedal into the throttle pedal path, increasing crash risk. Jayco dealers inspect and install a C-clamp.
What should I do if my 2010 Jayco Insignia is on this recall?
Check your VIN to confirm your specific motor home is included in recall 10V048. If it is, contact a franchised Jayco dealer and ask for the adjustable brake pedal inspection and C-clamp installation. Reference recall 10V048 when you call. The repair is free.
Is the recall repair free?
Yes. Federal recall law requires the manufacturer to provide the recall repair at no cost. For recall 10V048, Jayco dealers inspect the adjustable brake pedal assembly and install a C-clamp on the pedal assembly free of charge.
Is it safe to drive my 2010 Jayco Insignia before the repair?
The recall warns that reduced braking or throttle pedal interference increases crash risk. If your VIN is included, ask a Jayco dealer whether the motor home needs towing or dealer guidance before it is moved. The dealer repair is free.
What if I bought this Jayco Insignia used?
The free recall repair still applies. Recall coverage follows the vehicle, not the first owner. Since Jayco said no customer owner letters were planned when the recall was filed, check your VIN and give recall 10V048 to the Jayco dealer service desk.
More information
| NHTSA campaign page | nhtsa.gov/vehicle-recalls/10V048000 |
|---|---|
| Jayco customer service | 1-800-283-8267 |
| NHTSA recall # | 10V048 |
| NHTSA recall # (full) | 10V048000 |
Source documents
This article is generated from NHTSA's primary recall filings and reviewed against the source on June 3, 2026. RecallNotify does not paraphrase NHTSA's consequence language; that text is reproduced as written above. Editorial standards →